• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.407-411
• /
• 2022

공항 시설에서 통틀어 보안이 가장 취약한 곳은 Landside이다. 항공기 테러가 빈번하던 시절에는 X-ray를 비롯한 검색기술의 수준이 높지 않았던 탓에 Hijacking이나 폭발물에 의한 피해가 많았었다. 물론 기술이 발전한 현대에 와서도 Hijacking이나 항공기 폭파 같은 테러가 발생하고 있지만 9.11테러 이전보다는 훨씬 감소한 상황이다. 최근에는 보안수준이 높은 Airside 보다 상대적으로 보안이 취약한 Landside에 대한 보안 강화가 필요하다. 그 이유는 테러의 유형이 협상의 여지가 없는 최대피해와 최대공포를 주는 방식으로 변화하고 있기 때문이다. 따라서 상대적으로 부담이 덜하고 유동인구가 많은 Landside가 Soft Target이 되었다. 이런 상황에서 대한민국 공항이 어떻게 대응해야 하는지 관련된 법을 중심으로 본 연구를 진행해 보고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.9-15
• /
• 2010

Aim of the study: As an injectable scaffold, MPEG-PCL diblock copolymer was applied in bone tissue engineering. In vivo bone formation was evaluated by soft X-ray, histology based on the rat calvarial critical size defect model. Materials and Methods: New bone formation was evaluated with MPEG-PCL diblock copolymer in rat calvarial critical size bone defect. No graft was served as control. 4, 8 weeks after implantation, gross evidence of bone regeneration was evaluated by histology and soft X-ray analysis. Results: The improved and effective bone regeneration was achieved with the BMP-2 and osteoblasts loaded MPEG-PCL diblock copolymer. Conclusion: It was confirmed that MPEG-PCL temperature sensitive hydrogels was useful as an injectable scaffold in bone regeneration.

• Journal of fish pathology
• /
• v.20 no.2
• /
• pp.129-137
• /
• 2007

Skeletal deformity in hatchery-reared river puffer (Takifugu obscurus) fingerlings occurred. The vertebral abnormality was recognized with naked eyes 80 days after hatching. Affected fish had a good appetite but no clinical signs were found except the vertebral abnormality. As more than 90% of the hatchery-reared fish exhibited vertebral abnormality, the fingerlings could not be used for commercial seeds any more. Morphological changes in the vertebrate and the swim bladder were observed with a soft X-ray. Histopathological changes on the caudal muscle around the deformed vertebrae, gill, and spleen were also examined to clarify the cause of the deformity. Spinal curvature occurred between vertebrae 10 and 12, but any malfunction of the swim bladder was not found. The diameters of the muscle fibers around the deformed vertebrae were much smaller and more irregular than those in normal fish, and the gabs between the fiber bundles were greatly enlarged. No evidence of inflammation response was found in the muscle layer. In the hatchery, feed was putting at the position of water inflow, which might attract the fingerings to move toward the feed in spite of incomplete development of their caudal muscle fibers. From these results, it is suggested that the high speed of water current in rearing aquaria might be associated with the development of vertebral abnormality.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.4
• /
• pp.474-482
• /
• 2015

This study aims to investigate the patterns and incidence rates of morphological deformities during artificial fingerling production of blackhead seabream (BSB, Acanthopagrus schlegeli) juveniles by visual and soft X-ray observations of BSB juveniles (n=881) collected from four industrial hatcheries. Using both methods, we observed seven types of external deformity ($11.2{\pm}4.4%$) and eight types of skeletal deformity ($53.4{\pm}5.1%$). Lordosis occurred in all hatcheries with the highest frequency and the mean frequency was $13.1{\pm}4.4%$ (24.5% in total abnormal) by soft X-ray. Although they had a similar standard length (SL), juveniles with lordosis had a significantly lower condition factor and body weight than normally developed juveniles (P<0.05); normal distribution curves of histogram of body proportions, i.e., body height (BH)/head length (HL) and trunk (=SL-HL)/BH, indicated differences between normally developed juveniles and those with lordosis. In addition, 59% of juveniles with lordosis had vertebral curvature of less than $20^{\circ}$, generally at the $17^{th}$ vertebrae. It is expected that the above results will be used as basic data necessary for determining the cause of lordosis and for developing techniques to prevent this symptom in the fingering production industry of BSB juveniles.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.27.2-27.2
• /
• 2010

We have studied the formation of coronal holes (CHs) associated with halo CMEs. For this study, we used multi-wavelength data from Yohkoh Soft X-ray Telescope (SXT), GOES Soft X-ray Imager (SXI), SOHO EIT 195 ${\AA}$, SOHO MDI magnetogram, MLSO He I 10830 ${\AA}$, and BBSO H-alpha. The CHs are characterized by open magentic field regions with low emission, density, and temperature and their open fields drive high speed solar winds which cause geomagnetic storms. So far, the formation and the evolution of CHs are not well understood. The formation of the dark region associated with the eruption of a CME is well known as "coronal dimming" which may be caused by the mass depletion near the CME footpoint. It is different from a typical CH since it persists for only one or two days. In this study, we present three cases that show the formation of coronal holes which are associated with three halo CMEs: 1) 2000 Jul 14, 2) 2003 Oct 28, 3) 2005 May 13. In the first case, hot plasma was ejected during a weak eruption and then filled out the pre-existing CH. After the halo CME occurred, the hot plasma region becomes a CH again. In the second and the third cases, we found newly formed CHs just after their associated CMEs. All three coronal holes are associated with strong flares and persist over 3 days until they disappeared by the solar rotation. Examining the MDI magnetograms, we found that the magnetic polarity of each CH region has one polarity. Based on these results, we suggest that the coronal holes can be formed by the CMEs and they should be distinguished from the coronal dimming.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.1-17
• /
• 2000

Crystals in the woods and barks of Populus maximowiczii and Populus nigra ${\times}$ maximowiczii were examined by light microscopy, scanning electron microscopy and soft X-ray. Populus examined had the wetwood and the heartwood of Populus showed higher moisture content than in adjacent sapwood. The crystals can be detected clearly by the soft X-ray due to their higher densities than the wood. Crystals in xylem wood of Populus were found mainly at heartwood. However, they were concentrated in specific areas such as in color-stained area or along the specific annual rings. Crystals showed the highest occurrence around the pith. Within a growth ring the amount of crystals in earlywood was more abundant than in latewood. Crystals were observed mainly at vessels and fibers although they occurred at all kinds of cells in heartwood. Crystals in the bark were scattered evenly both in inner bark and in outer bark. Populus nigra${\times}$maximowiczii showed higher frequency of leaf knots than Populus maximowiczii.

• The korean journal of orthodontics
• /
• v.20 no.3 s.32
• /
• pp.427-446
• /
• 1990

The objective of this study was to understand the major changes of craniofacial dimensions and spatial growth pattern during the late embryonic and fetal period of human fetures. This study was performed with the selective materials of normal fetuses received from the Registry of Congenital Malformation of Seoul National University Hospital. The specimens consisted of nineteen embryos and sixty-six fetuses. The photomicrographs from mid-segittal sections of embryos were used for angular measurement, and the lateral cephalograms taken with soft X-ray were also measured in liners and angular aspects. All of the anatomical landmarks for the tracing of the photomicrographs and cephalograms were referred to the previous reports on literature. The sequential changes of prenatal craniofacial dimensions and agles were analysed statistically and discussed on the focus about the developmental growth directions of human ore-facial structure arised from heterogeneous origins. The results are as follows, 1) Cranial base angle was almost formed at about 6 weeks old embryos with the average angle of $127.4{\pm}6.33^{\circ}$ (n=3) and it was almost constant onwards. 2) The linear increase rates of anterior cranial base length and anterior facial height exceeded those of the posterior cranial base length and posterior facial height, and the maxilla grows more rapidly on the horizontal dimension than the vertical dmension during the fetal period. 3) The angular relationship between the anterior cranial base and palatal plane decreasedslightly during the fetal period, disclosing $11^{\circ}$ at 12th week gestation and $5^{\circ}$ at 41th weeks gestation. 4) Genial angle was maintained almost constantly at about $130^{\circ}$ during the fetal period from 12 weeks to 41 weeks of gestation.

• Imaging Science in Dentistry
• /
• v.37 no.2
• /
• pp.69-77
• /
• 2007

Purpose: To evaluate the accuracy of the imaging reformation of cone beam computed tomography for the assessment of bone defect healing in rat model. Materials and Methods: Sprague-Dawley strain rats weighing about 350 gms were selected. Then critical size bone defects were done at parietal bone with implantation of collagen sponge. The rats were divided into seven groups of 3 days, 1 week, 2 weeks, 3 weeks, 4 weeks, 6 weeks, and 8 weeks. The healing of surgical defect was assessed by multi planar reconstruction (MPR) images and three-dimensional (3-D) images of cone beam computed tomography, compared with soft X-ray radiograph and histopathologic examination. Results: MPR images and 3-D images showed similar reformation of the healing amount at 3 days, 1 week, 2 weeks, and 8 weeks, however, lower reformation at 3 weeks, 4 weeks, and 6 weeks. According to imaging-based methodologies, MPR image revealed similar reformation of the healing amount than 3-D images compare with soft X-ray image. Among the four threshold values for 3-D images, 400-500 HU revealed similar reformation of the healing amount. Histopathologic examination confirmed the newly formed trabeculation correspond with imaging-based methologies. Conclusion: MPR images revealed higher accuracy of the imaging reformation of cone beam computed tomography and cone beam computed tomography is a clinically useful diagnostic tool for the assessment of bone defect healing.

• Korean Journal of Environment and Ecology
• /
• v.7 no.2
• /
• pp.192-206
• /
• 1994

The freshwater fish fauna of the Tokyusan National Park was censused during June 1993 to November 1993 at 9 sampling sites to establish baseline data for natural conservation program on the National Park. Seventeen species included 7 Korean endemic species and/or subspecies(Acheilognaths koreunus, Squazidus gracilis majimae, Microphysogobio yaluensis, Phoxinus kumganensis, Cobitis koreensis koreensis, Silurus microdorsalis and Odontobutis platycephala) belonging to 5 families were collected in this region. Sixteen species were found in Kumkang and 8 species were found in Naktongkang, however, common species were Squalidus gracilis majimae, Microphysogobio yaluensis, Puntungia herzi, Moroco oxycephalus, Zucco temminckii, Misgurnus anguillicaudatus and Odontobutis platycephala. Dominant species of this region were Moroco oxycephalus, Zacco temminckii, Odontobutis platycephala. The final aims of this study were not only accumulate baseline data on the osteology of Korean freshwater fishes which were collected at those streams during June 1993-November 1993 with soft X-ray radiography, but also evaluate the suitability of osteological analyses on the environmental damage to fish.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.151-159
• /
• 2015

PURPOSE. To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS. A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non- quantitatively. RESULTS. All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION. The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.