• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.185-192
• /
• 2006

Cares should be taken when performing the P and S wave velocity loggings in engineering and environmental fields. Some of them are the effect of casing, which is installed to prevent the borehole collapsing when the drilling is done on the loose ground such as soil and/or soft rock, and the discrepancy of the velocities of the same media according to the difference of the source wave frequency spectrum. The elastic moduli obtained from the P and S wave velocity logging have the dynamic characteristics. To overcome these difficulties, the following suggestions are recommended; (1) develop and apply a careful drilling technique that can keep the borehole wall without a casing, and (2) apply the logging methods with the suitable frequency bandwidth for the object of the velocity logging. It is important to make the aseismological engineers understand the difference between the dynamic elastic moduli and the static ones obtained from mechanical test, and to advise them to use the information properly.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.23-28
• /
• 1999

ALP (alkaline phosphatase) is a membrane-bound metalloenzyme that is expressed in osteoblasts, hepatocytes, lung, kidney, endothelial cells, leukocytes and other cells. Normal soft tissue and skin show little tissue nonspecific ALP (TN-AP), However, scar tissue contains high levels of TN-AP activity, and in fact, TN-AP is expressed intensely in regenerating connective tissue after the wounding. The purpose of this study was to evaluate the change of ALP expression in hypertrophic scar model in rabbits and the effect of triamcinonolone on ALP expression. Adult male New Zealand white rabbits, weighing about 2.5 kg, were used. After full-thickeness wounding over the ventral surface of each ear, either saline (control ear) or triamcinolone (contralateral ear) was injected on day 16. Rabbits were sacrificed on day 3, 7, 15, 17, 19, 23, and the specimens were retrieved en bloc. Histologic and immunohistochemical examinations of tissue samples were done. The results obtained were as follows: On day 3, ALP reaction was observed on fibroblasts and inflammatory cells in wound margin. On day 7, ALP reaction was more intense than day p in capillaries, inflammtory cells, and fibroblasts behind newly formed epithelium. On day 15, ALP reaction was lessened in both groups and appeared mainly in subepidermal capillary network, Since day 17, ALP reaction was lessened in both groups and weaker in triamcinolone-injected group than in saline-injected group. These results suggest that ALP reaction isn't increased in triamcinolone-injected scar and triamcinolone reduces scar not by increasing TN-AP expression but other mechanism.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.338-345
• /
• 1991

Velopharyngeal incompetence (VPI) is a condition of inadequate functional valving between the oral and nasal cavities that results in hypernasal speech and nasal air escape. VPI is caused by the following factors ; cleft palate, soft palate defect, pharyngomegaly, velopharyngeal sphincter muscle anomaly and maxillary advancement surgery, etc. Velopharyngeal function is assessed by a variety of measures that include speech evaluation, cephalogram, airflow study, videofluoroscopy and nasoendoscopy. The management of VPI is classified into four main groups ; prosthesis, insertion of implant, palatoplasty and pharyngoplasty. Pharyngeal flap is the most common surgical procedure for correcting VPI since Schoenborn's report in 1875. We report seven cases of VPI which were treated by modified modified superiorly based pharyngeal flap with good results.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.611-618
• /
• 2007

We demonstrate the sol-gel coating technique of colloidal clusters for producing hollow micro-particles with complex morphologies. Cross-linked amidine polystyrene (PS) microspheres were synthesized by emulsifier-free emulsion copolymerization of styrene and divinylbenzene. The amidine PS particles were self-organized inside toluene-in-water emulsion droplets to produce large quantities of colloidally stable clusters. These clusters were coated with thin silica shell by sol-gel reaction of tetraethylorthosilicate (TEOS) and ammonia, and the organic polystyrene cores were removed by calcination at high temperature to generate nonspherical hollow micro-particles with complex morphologies. This process can be used to prepare hollow particles with shapes such as doublets, tetrahedra, icosahedra, and others.

• Geomechanics and Engineering
• /
• v.12 no.2
• /
• pp.295-312
• /
• 2017

Cast in situ and grouted concrete helical piles with 150-200 mm diameter half cylindrical ribs have become an economical and effective choice in Shanghai, China for uplift piles in deep soft soils. Though this type of pile has been successful used in practice, the reinforcing mechanism and the contribution of the ribs to the total resistance is not clear, and there is no clear guideline for the design of such piles. To study the inclusion of ribs to the contribution of shear resistance, the shear behaviour between silty sand and concrete slabs with parallel ribs at different spacing and angles were tested in a large direct shear box ($600mm{\times}400mm{\times}200mm$). The front panels of the shear box are detachable to observe the soil deformation after the test. The tests were modelled with three-dimensional finite element method in ABAQUS. It was found that, passive zones can be developed ahead of the ribs to form undulated failure surfaces. The shear resistance and failure mode are affected by the ratio of rib spacing to rib diameter. Based on the shape and continuity of the failure zones at the interface, the failure modes at the interface can be classified as "punching", "local" or "general" shear failure respectively. With the inclusion of the ribs, the pull out resistance can increase up to 17%. The optimum rib spacing to rib diameter ratio was found to be around 7 based on the observed experimental results and the numerical modelling.

• Journal of The Korean Astronomical Society
• /
• v.24 no.2
• /
• pp.129-149
• /
• 1991

An attempt has been made to examine the characteristics of acoustic and MHD waves generated in stellar convection zones($4000\;K\;{\leq}\;T_{eff}\;{\leq}\;7000\;K$, $3\;{\leq}\;\log\;g\;{\leq}\;4.5$). With the use of wave generation theories formulated for acoustic waves by Stein (1967), for MHD body waves by Musielak and Rosner (1987, 1988) and for MHD tube waves by Musielak et al.(l989a, 1989b), the energy fluxes are calculated and their dependence on effective temperature, surface gravity and megnetic field strength are analyzed by optimization techniques. In computing magneto-convection models, the effect of magnetic fields on the efficiency of convection has been taking into account by extrapolating it from Yun's sunspot models(1968; 1970). Our study shows that acoustic wave fluxes are dominant in F and G stars, while the MHD waves dominant in K and M stars, and that the MHD wave fluxes vary as $T_{eff}^4{\sim}T_{eff}^7$ in contrast to the acoustic fluxes, as $T_{eff}^{10}$. The gravity dependence, on the other hand, is found to be relatively weak; the acoustic wave fluxes ${\varpropto}\;g^{-0.5}$, the longitudinal tube wave fluxes ${\varpropto}\;g^{0.3}$ and the transverse tube wave fluxes ${\varpropto}\;g^{0.3}$. In the case of the MHD body waves their gravity dependence is found to be nearly negligible. Finally we assesed the computed energy fluxes by comparing them with the observed fluxes $F_{ob}$ of CIV(${\lambda}1549$) lines and soft X-rays for selected main sequence stars. When we scaled the corrected wave fluxes down to $F_{ob}$, it is found that these slopes are almost in line with each other.

• Current Industrial and Technological Trends in Aerospace
• /
• v.9 no.1
• /
• pp.119-129
• /
• 2011

The soft landing of a lunar lander after the entrance of lunar orbit is an essential prerequisite for the accomplishment of the lander's lunar mission. During the landing process of a lunar lander, efficient shock absorption and stability maintenance are indispensible technology to protect payloads. Therefore, the landing gear is a crucial structural component of a lunar lander, it has to absorb the kinetic energy associated with touchdown and support the static load of the landing module in an upright position. In this paper, various landing gears of lunar landers which are being developed as well as which had been successfully landed on the moon surface are investigated. In the end, the Korean lunar lander, which is being designed for preliminary development model, is presented as an example of the lunar lander development.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.111-122
• /
• 2012

Resistivity seismic dilatometer (RSDMT) system is introduced. The resistivity module for obtaining resistivity-depth plot and seismic module for obtaining wave velocity-depth plot are attached to the conventional flat dilatometer testing equipment. To enhance the reliability and repeatability of seismic part in RSDMT, automatic testing system including automatic surface source, PC based data acquisition system and operating program was constructed. To obtain real resistivity value of soil, geometric factor for the array of electrodes in RSDMT was derived empirically. The verification studies for the developed RSDMT system were performed with SPT, CPTu, bender element test and DC resistivity survey. Through one penetration of RSDMT, various soil parameters were obtained and the reliability and repeatability of developed RSDMT system could be checked.

• Journal of the Korean Home Economics Association
• /
• v.12 no.34
• /
• pp.663-677
• /
• 1974

The social and psychological approaches to clothing researches by Fluge,l, Hurlock and Barr in the early 1930's have since been developed greatly. It has now been generally agreed that clothing is the symbol of one's personality and social status, for clothing is regarded as the second skin and a manifestation of one's emotional states as well. Based on this consensus, this study was intended to observe the possible relationship between one's clothing design preference-in line, color and texture- and interest. For this survey, 200 college woman students from four universities were selected at random, and an interest-test standardized by prof. Jung Bum Mo and a questionaire made of 20 items on the clothing prferences were given. The results as commputerized and analyzed are as follows : 1. Line Preference a) Structural line : It is quite obvious that those like straight line are interested in fine arts, and curved line in physics. b) Out-line : Among tubular, bell and bustle of the silhouette, those like the bustle have shown particular interest in music, and the tubular in politics and business. c) Style : There is a salient tendency that those like a dressy style are much interested in music, and casual style in physics and physical exercise. 2. Color Preference a) Favorite color : Those like red, orange and yellow show a high interest in artistic activities and physical exercise, and black, grey and white in politics. b) Variety and combination of color ; These have shown no relationship to the interest. 3. Texture Preference a) The touch : Those like the texture with the feeling the crisp and rough are interested in fine arts, and of soft and smooth in the field of social service. b) Fabric surface : Those like naturalistic pattern, i.e. print of flowers, show much interest in music and literature, and plain fabrics in physical exercise.

• The Korean Journal of Mycology
• /
• v.46 no.2
• /
• pp.200-204
• /
• 2018

Sclerotinia rot symptoms were frequently found on the stems of Aster yomena in the Gurye region of Korea in April 2016. The symptom, watery soft rot, mainly appeared on the stems, and severely infected plants blighted. White mycelia spread over the stems of the infected plants and the soil surface. Small black sclerotia formed on the plant lesions and inside the diseased stems. Incidence of the disease was as high as 20~80% in the A. yomena fields. Based on the morphological and molecular characteristics of the isolates, the fungi were identified as Sclerotinia minor. This is the first report of Sclerotinia rot caused by Sclerotinia minor on A. yomena in Korea.