• Journal of Oral Medicine and Pain
• /
• v.21 no.1
• /
• pp.183-196
• /
• 1996

The author examined the clinical and histological changes on the dorsal tongue mucosa of adult Sprague-Dawley rats after lasing by pulsed Nd:YAG laser. The dorsal tongue was lased for 3 seconds by 1.5, 2.0, 2.5, 3.0, 3.5, 4.0W and 10, 15, 20, 20pps. After tissue changes were observed clinically, the excised samples were observed histologically and the width of tissue destruction was analyzed quantitatively under the Confocal laser microscope respectively. The following results were obtained : 1. Whitening of peripheral tissue was observed more as increasing pulsed per second (Hz) below power 2.5W and observed at all parameters above power 3.0W. 2. Charring of mucosal surface was observed at all parameters but mild at parameters below power 2.0W. 3. The destruction of epithelium was observed at all parameters and tissue destruction was extended to lamina propria at higher pulses per second. 4. The width of tissue destruction was more widening as increasing energies per pulse (p<0.001) and the narrowest at 20Hz than 10Hz, 15Hz and 30Hz(p<0.05). As the above results, author suggests power below-3.5W and 20Hz as the lasing parameters for oral soft tissue therapy.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.279-284
• /
• 2008

We investigated whether carboxylate exudation of Brassica pekinensis Rupr. was affected by nitrate deposition from simulated acid rain. A gas chromatographic (GC) analysis was employed for the determination of low molecular weight organic acids (LOA) in rhizosphere soils, bulk soil, roots and leaves of Brassica pekinensis Rupr.. Rhizosphere soils were collected after 8 weeks of plant growth by first removing the bulk soil from the root system and then by mechanical move off the rhizosphere soil that adhered to the root surface with soft brush. Soil and plant materials were simultaneously extracted with the mixture of methanol and sulfuric acid (100:7, v/v). Seven organic acids, oxalic, malonic, fumaric, succinic, maleic, L-malic and citric acid were identified and quantified by GC equipped with FID. Oxalic, L-malic, and citric acids were found in both the bulk and rhizosphere soils, while most LOAs were not detected in the control treatment. On the contrary, except maleic acid, all other organic acids were detected in the leaves and roots of cabbages treated with nitrate deposition.

• Clinics in Shoulder and Elbow
• /
• v.7 no.1
• /
• pp.46-50
• /
• 2004

The snapping scapula is a relatively uncommon phenomenon occuring as a consequence of some anomalous conditioin existing between the thoracic wall and the undersurface of the scapula. It may present in several ways like crepitus, pain during scapular movement and limitation of scapular motion. The causes of snapping scapula are changes in the intervening soft tissues, the muscles, or the bursae between the scapula and the chest wall; and changes in the congruence between the anterior scapular surface and the underlying chest wall. The congenital elbow fusion or humeroradioulnar synostosis is an extremely rare inheritable disorder that previously described just a few reports. Recently we experienced a case of snapping scapular with congenital bilateral elbow fusion treated by arthroscopic scapulothoracic bursectomy and consequent open superomedial scapulectomy. We would describe the clinical feature of a snapping scapula and result of treatment with literature review.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.651-656
• /
• 2012

A study on capacitive characteristics of stylus pen for touch panel are progressed in this paper. Also the main factors for capacitive sensitivity are studied. Namely, highly sensitive stylus pen which can be applied to capacitive touch panel are studied based on the analysis of materials and process conditions regardless of pattern shapes. Stylus pen was made of PDMS(Poly-Di-Methyl-Siloxane) and conductive metal powders which does not damage the touch panel surface. We tried to get the advantages of both the properties of soft PDMS and conductive metal powders. We found that potential difference of capacitance change with conductivity of the composite materials(PDMS + metal powders) it implies that during touch process, large voltage difference can be caused by the high conductive materials of stylus pen. Stylus pen made by PDMS with mixed with Ag powders which has large conductivity shows more capacitance change of 1 pF than PDMS with other materials of Ni or C powders.

• Tunnel and Underground Space
• /
• v.5 no.4
• /
• pp.336-346
• /
• 1995

Geotechnical Information System (GTIS) for efficient management of three dimensional borehole data has been developed. Some problems were raised during the input process of borehole data, and alternative solutions were sought. According to the previous geotechnical reports, there is no unified weathering classification scheme. A criterion, 100 times/30cm from SPT, was turned out inappropriate to the discrimination of weathered rock from weathered soil. It has also been suggested that weathered soil, weathered rock, soft rock, and hard rock should be defined as CW, HW, MW, and SW~fresh condition. For better comparison of RQD, the use of NX size coring is recommended for the whole area although BX size coring has been used in excavated area. The limit of drilling depth up to 1 m from the top of surface of hard rock should be extended to avoid possible wrong interpretation of rock head due to the existence of corestone. The input data were analysed by geostatistical methods. It is found that the range in semivariogram is about 300m, and the variance of gneiss is greater than that of granite. It is because the granite data analysed came from almost single uniform rock mass(i.e.Seoul granite), but gneiss data came from the rock mass(i.e. Gyeonggi gneiss complex experienced several metamorphic metamorphic processes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.121-131
• /
• 1985

The characteristic of fatigue crack growth in the homogeneous or the soft welded connections used SWS-53 steel and HT-80 steel as base metals is examined by fractographic analysis. As a result of this analysis, the fact that the characteristic of fatigue crack growth which is observed and measured at the surface has wide application to engineering practice is verified. Also, the fact that the welded parts of HT-80 steel have much danger of brittle fracture is prooved. Considering that the striations are observed at the welded parts of SWS-58 steel and the spacing of striations has higher numerical value than da/dN, we can prove that inner fatigue crack growth may develop in zig-zag directions.

• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.329-336
• /
• 2002

The along-wind response of a surface-mounted elastic fence under the action of wind was investigated numerically. In the computations, two sets of equations, one for the simulation of the unsteady turbulent flow and the other for the calculation of the dynamic motion of the fence, were solved alternatively. The resulting time-series tip response of the fence as well as the flow fields were analyzed to examine the dynamic behaviors of the two. Results show that the flow is unsteady and is dominated by two frequencies: one relates to the shear layer vortices and the other one is subject to vortex shedding. The resulting unsteady wind load causes the fence to vibrate. The tip deflection of the fence is periodic and is symmetric to an equilibrium position, corresponding to the average load. Although the along-wind aerodynamic effect is not significant, the fluctuating quantities of the tip deflection, velocity and acceleration are enhanced as the fundamental frequency of the fence is near the vortex or shedding frequency of the flow due to the occurrence of resonance. In addition, when the fence is relatively soft, higher mode response can be excited, leading to significant increases of the variations of the tip velocity and acceleration.

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.319-331
• /
• 2017

This vacuum preloading combined with polyacrylamide (PAM) flocculation was proposed to separating solid-liquid in waste slurry and to improving bearing capacity of soft soil ground. By using waste slurry taken from drilled shaft construction site in Shanghai, China, a series of settling column tests with four typical flocculants and one normal for waste slurry were carried out for comparative analysis. The optimal amounts for each flocculant were obtained from the column tests. Then, model tests on vacuum preloading with anionic polyacrylamide (APAM) flocculation and without flocculants were carried out. The out of water and the settlement of slurry surface ground were monitored during the model tests, and the changes in water content, particle-size and pore-size distributions in different positions after the model tests were measured and discussed. It is found that water content of the waste slurry without APAM flocculation changed from 204 to 195% by 24 hours standing and 15 hours vacuum preloading, while the water content of the waste slurry with APAM flocculation was declined from 163 to 96% by 24 hours standing, and was further reduced into 37% by 136 hours vacuum preloading, which shows that the combined method is feasible and effective.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.1
• /
• pp.64-67
• /
• 1998

A ganglion cyst is a soft tissue mass that is surrounded by a dense connective-tissue capsule. The capsule is filled with a viscous fluid that is rich in hyaluronic acid and other mucopolysaccharides. But, Ganglion cysts in the knee joint are rare. There are very few case reports of ganglion cysts related to the surface of the anterior cruciate ligament, Posterior cruciate ligament and medial meniscus. We are reporting a case of a ganglion cyst in the anterior aspect of the anterior cruciate ligament accompanying with discoid lateral meniscus in the right knee of a 46-year-old woman without any history of trauma. The cyst and discoid lateral meniscus were treated successfully with arthroscopic excision and partial meniscectomy.

• Journal of Korea Foundry Society
• /
• v.22 no.4
• /
• pp.174-183
• /
• 2002

Twin-roll process is a relatively new continuous casting process which can produce high-quality strip products directly, and solidification rate can reach $10^3$ to $10^4$ K/s, leading to fine and uniform microstructures with enhanced mechanical properties. The strip casting condition for producing fine Al-Sn alloy strip was obtained experimentally, and defects appearing on the strip was examined. Crack formation and surface quality of the strip was found to depend mainly on process parameters such as melt temperature, roller gap and rolling speed. Sn structure of network type was observed in Al-20Sn and Al-40Sn alloy strips, and cell spacing of Al-40Sn alloy was smaller than that of Al-20Sn. Banding strength of the heat treated specimens increased with increasing of soaking time and temperature, and bonding strength of Al-20Sn alloy was more superior than that of Al-40Sn alloy. However wear resistance of Al-40Sn alloy contained large amount of soft Sn which possess good anti-friction characteristics was superior than that of Al-20Sn alloy.