• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.638-645
• /
• 2010

This study introduces a reinforcement work case using Twin-Jet Method. The area is located behind the abutment of the bridges built on soft clay along the $\bigcirc\bigcirc$ Express Highway. Its foundation was constructed by installing EPS blocks on the original ground to reduce the embankment load under the highway. However, the ground deformation has continuously occurred due to the settlement of the foundation soft cohesive soils. The amounts of subsidences at the surface turned out to be 20~30.0mm, After the pavement patch work on April 23, 2009, a drastic subsidence occurred together with 10mm swell, For this reason, Twin-Jet grout column construction was applied by passing through the EPS banking blocks without closing traffic flows on the express highway. The outcomes of core sample tests after reinforcing the ground turned out to be TCR 92.5%, RQD 64.6% and unconfined compressive strength 2.3~8.6Mpa. The test results showed that the condition of the ground foundation had improved using Twin-Jet grouting in most layers of ground including the cobble and gravel layer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.1 s.29
• /
• pp.79-87
• /
• 1989

In the part 1 and 2, relations were found between fundmental mechanical properties and primary hand values, performance of Korean women's summer and fall & winter fabrics. In this paper, in order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the core-spun yarn woven fabrics for Korean folk clothes were measured by KES-F system. The experimental results are statistically analyzed in the aspects of the mechanical properties, their effects on the hand values, formation of weared clothes and transformation behavior. The correlation in the hand values are analyzed, too. Furthermore, there mechanical properties are discussed in comparison with those values for kimono fabrics. The main results are summarized as follows: 1. The core-spun yarn woven fabrics for Korean folk clothes have box-shaped silhouette based on higher bending rigidity and shear elasticity. 2. The core-spun yarn woven fabrics for Korean folk clothes are inferior to silk fabrics, superior to polyester fabrics in formation. 3. A drapability and wrinkle recovery of core-spun yarn woven fabrics for Korean folk clothes formation for weared clothes are inferior to polyester fabrics, superior to silk fabrics. 4. A primary factor of mechanical properties contribute to the hand values of core-spun yarn woven fabrics for Korean folk clothes are same as the Korean women's winter fabrics, except for flexibility with soft feeling. 5. As for the hand values of core-spun yarn woven fabrics for Korean folk clothes, stiffness, anti-drape stiffness are superior to those of polyester fabrics. And also, flexibility with soft feeling, scrooping feeling of core-spun yarn woven fabrics have greater values as compared with silk fabrics for Korean folk clothes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1466-1473
• /
• 2012

Soft icecream is made by scraping an ice formed on the inside of the cylindrical evaporator, where R-404A is evaporating in the annulus. The heat transfer characteristics of the refrigerant evaporation and those during icecream formation were experimentally investigated. Results show that the refrigerant-side heat transfer coefficients are highly dependent on the location in the evaporator due to the complex annulus configuration. The heat transfer coefficient at the inlet is generally lower than those of other locations. The average heat transfer coefficient increases as heat flux increases or saturation temperature decreases. A correlation is developed to predict the refrigerant-side heat transfer coefficient. The icecream-side heat transfer coefficient oscillates continuously due to the periodic removal of ice formed on the surface. The average heat transfer coefficient during icecream formation is approximately 280 W/$m^2K$, and that during single-phase cooling increased from 150 W/$m^2K$ to 250 W/$m^2K$.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.83-88
• /
• 2020

The evolution of smartphones has led to numerous researches in the mechanical behavior of flexible devices. Due to the nano-size of the thin flexible film, nanoindentation is widely used to evaluate its mechanical behaviors, such as elastic modulus, and hardness. However, the commonly used Oliver-Pharr method is not suited for analyzing the indentation force-depth curves of hard films on soft substrates, as the effects of soft substrate is not considered theoretically. In this study, the elastic modulus of the thin film was evaluated with references to other reported models which include the substrate effect, and with calibration of the indentation depth for the pile-ups between the indenter and test surface. We fabricated test samples by deposition of amorphous metal film on polyimide and silicon wafers for verification of modified models.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.623-634
• /
• 2007

The aim of this research is development and verification of resistivity seismic dilatometer (RSDMT) system. The resistivity module for obtaining resistivity-depth plot and seismic module for obtaining wave velocity-depth plot are attached to the conventional flat dilatometer testing equipment. To enhance reliability and repeatability of seismic part in RSDMT, automatic testing system including automatic surface source, PC based data acquisition system and operating program were developed. To obtain real resistivity value of soil, geometric factor for the array of electrodes in RSDMT was derived empirically. The verification studies for the developed RSDMT system were performed at the southeast side of Korea where soil improvement work is planned. SPT, CPT, geophysical subsurface imaging techniques and some laboratory tests were performed for the comparisons. As one penetration of RSDMT, various soil parameters could be obtained. The results of field test showed good repeatability and reliability in every part. From these studies, developed RSDMT system was checked and the effectiveness of this system was verified in light of proper evaluation of geotechnical characteristics of soft soil.

• Journal of Korean Dental Science
• /
• v.7 no.1
• /
• pp.38-42
• /
• 2014

Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is defined as exposed necrotic bone without evidence of healing for at least 8 weeks in the maxillofacial area in a patient with history of bisphosphonate use. Obtaining complete coverage of the hard tissue by soft tissue in BRONJ patients is especially important. Therefore, managing the mucosa is one of the key factors in a successful outcome, but this is especially hard to achieve in BRONJ patients. Various applications of buccal fat pad in oral reconstruction-including the closure of surgical defects following tumor excision, repair of surgical defects following the excision of leukoplakia and submucous fibrosis, closure of primary and secondary palatal clefts, coverage of maxillary and mandibular bone grafts, and lining of sinus surface of maxillary sinus bone graft in sinus lift procedures for maxillary augmentation-have been studied. Eliminating all potential sites of infection and post-operative infection control is crucial in BRONJ. We present a case using the buccal fat pad pedicle for a stage 3 BRONJ defect. Uneventful total epithelialization of the buccal fat pad regardless of size was noted. In summary, the buccal fat pad has versatile application and various recipient sites for surgical utilization. It is an easy technique, with promising overall success rates. With careful selection and handling, buccal fat graft can resolve problems with soft tissue coverage in stage 2 or 3 BRONJ patients.

• Journal of Korean Foot and Ankle Society
• /
• v.3 no.1
• /
• pp.26-32
• /
• 1999

Fractures of the tibial pilon are the severe injuries to the ankle joint resulted from axial compression, shear and/or rotational forces. The pilon fractures have been difficult in management due to the severe comminution of articular surface and frequent soft tissue problem. Among many treatment options, limited internal fixation of the tibia with long screws and multiple pins augmented with external fixation or casting provide adequate stabilization without soft tissue compromise. Among the patients of pilon fracture admitted to our hospital from March 1993 to March 1997 who treated by limited internal fixation and external fixation or casting, 25cases are included who could be follow up for more than 10months. According to Ruedi and Allgower, typeI 3cases, typeII 14cases, typeIII 8cases. The authors analyzed the clinical and radiological results of the tibial pilon fractures according to Magnusson. The results were as follow. 1. 10cases at Ruedi-Allgower typeII were obtained above fair and 5cases at Ruedi-Allgower typeIII were obtained above fair. 2. The postoperative complications were skin problem(3cases) and infection(2cases), which were treated by antibiotics and flap surgery.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2007

This study suggests the new technique to express the texture that copes with the demands of the times by trying to apply the new Nuno-felt technique, to the silk, the representative material for emotion, in order to provide the basic data for the development of highly value added and competitive materials in the domestic and international markets as well as to meet the demand of consumers in the high emotion age pursuing the idiosyncrasy and qualify enhancement. Nuno-felt is the felting technique that places the wool of desired thickness on the thin fabric using wools and various kinds of fabric materials and rubs them. The samples are 3 kinds of silk including plain Chiffon with different touch, Pongee and Organza and Merino Wool, the best quality wool of wools. As a result, beyond the simple surface effect from the silk showing the superior drape feature with one color and soft wool, the Nuno-felt technique created the feminine as well as masculine, classic and modem image. Furthermore, the harmony of opacity and transparency produced the new dynamic and dimensional texture with the combination of different emotions through the visual emotion of different grey colors and rough, crude and soft touch. This study suggested the possibility that the Nuno-felt technique could create the new emotional materials for the modem sense by combining the materials with different features from the wools unlike the traditional simple felt technique.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.602-609
• /
• 2008

STATEMENT OF PROBLEM: Loss of the marginal bone to the first thread have been accepted but continuous effort have been made to reduce this bone loss by varying implant design and surface texture. PURPOSE: This animal study has examined the histomorphometric variations between implants with micro-thread, micro-grooved and turned surfaced neck designs. MATERIAL AND METHODS: Four mongrel dogs have been used the premolars removed and left to heal for three months. One of each implant systems with turned neck, micro-thread and micro-grooved were placed according to the manufacturers’protocol and left submerged for 8 and 12 weeks. These were then harvested for histological examination. RESULTS: The histologically all samples were successfully ossointegrated and active bone remodelling adjacent to implants. With the micro-grooved implants 0.40 mm and 0.26 mm of the marginal bone level changes were observed at 8 and 12 weeks respectively. The micro-threaded implants had changes of 0.79 mm and 0.56 mm at 8 and 12 weeks respectably. The turned neck designed implants had marginal bone level changes of 1.61 mm and 1.63 mm in 8 and 12 weeks specimens. A complex soft tissue arrangement could be observed against micro-threaded and micro-grooved implant surfaces. CONCLUSION: Within the limitations of this study, it could be concluded that implants with micro-grooved had the least and the turned neck designed implants had the most changes in the marginal bone level. The textured implant surfaces affect soft tissue responses.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.3
• /
• pp.537-547
• /
• 2001

The paper proposes the fuzzy logic global approximate optimization strategies in optimal sizing of automotive A-pillar trim with rib structures for occupant head protection. Two different strategies referred to as evolutionary fuzzy modeling (EFM) and neuro-fuzzy modeling (NFM) are implemented in the context of global approximate optimization. EFM and NFM are based on soft computing paradigms utilizing fuzzy systems, neural networks and evolutionary computing techniques. Such approximation methods may have their promising characteristics in a case where the inherent nonlinearity in analysis model should be accommodated over the entire design space and the training data is not sufficiently provided. The objective of structural design is to determine the dimensions of rib in A-pillar, minimizing the equivalent head injury criterion HIC(d). The paper describes the head-form modeling and head impact simulation using LS-DYNA3D, and the approximation procedures including fuzzy rule generation, membership function selection and inference process for EFM and NFM, and subsequently presents their generalization capabilities in terms of number of fuzzy rules and training data.