• 한국식품영양과학회지
• /
• 제32권3호
• /
• pp.370-374
• /
• 2003

홍삼 분쇄의 신 가공 기술로서 비충격 분쇄방식인 cell cracker의 공장 적용 가능성을 제시하고 홍삼분말의 품질고급화에 기초자료로 활용하고자, 기존의 hammer mill(충격분쇄방식)과 cell cracker에 의한 분쇄방식으로 홍삼분말을 제조한 후 물성, 표면구조적 특성 및 관능적 특성을 측정하였다. 입도분석에서 sieve shaker로 분석한 결과, 100 mesh 이상은 모두 95%수준으로 비슷한 분포를 나타냈고 120 mesh 이상은 hammer mill로 분쇄한 홍삼분말이 높았으며 그 밖의 각 mesh별 입도분포는 큰 차이를 나타내지 않았다. Laser scattering analyzer로 분석한 결과 hammer mill로 분쇄한 홍분말의 입도분포는 최소 0.77$\mu\textrm{m}$에서 최대 128.07$\mu\textrm{m}$으로, cell cracker로 분쇄한 홍삼분말 4.24~180.07$\mu\textrm{m}$보다 분포가 넓었으며, 평균 입자 크기는 cell cracker로 분쇄한 홍삼분말이 크고 표준편차는 hammer mill로 분쇄한 홍삼분말이 크게 나타났다. 비표면적은 hammer mill로 분쇄한 홍삼분말이 1.42 $m^2$/g로 cell cracker로 분쇄한 홍삼분말 0.59 $m^2$/g보다 높게 나타났고, 표면구조적 특성은 hammer mill로 분쇄한 홍삼분말은 크고 작은 입자가 불균일하게 분포하고 있으며, 개별입자의 형태는 부등형의 거칠게 연마된 돌 모양에 가깝고 표면은 작고 부드러운 솜털모양을 하고 있는 반면에, cell cracker로 분쇄한 홍삼분말은 입자크기가 상대적으로 고르게 분포하고 있으며 개별입자의 형태는 부등형의 조각난돌 모양의 형태로 관찰되었다.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• 천문학회보
• /
• 제39권2호
• /
• pp.103-103
• /
• 2014

Manufacturing of lens and mirror using Diamond Turning Machine (DTM) offers distinct advantages including short fabrication time and low cost as compared to grinding or polishing process. However, the DTM process can leave mid-frequency error in the optical surface which generates an undesirable diffraction effect and stray light. The mid-frequency error is expected to be eliminated by mechanical polishing after the DTM process, but polishing of soft surface of ductile aluminum is extremely difficult because the polishing process inevitably degrades the surface form accuracy. In order to increase its surface hardness, we performed electroless nickel plating on the surface of diamond-turned aluminum (Al-6061T6) off-axis mirrors, which was followed by the 6-hour-long baking process at $200^{\circ}C$ for improving its hardness. Then we polished the nickel plated off-axis mirrors to remove the mid-frequency error and measured polished mirror surfaces using the optical surface profilometer (NT 2000, Wyko Inc.). Finally, we ascertained that the mid-frequency error on the mirror surface was successfully removed. During the whole processes of nickel plating and polishing, we monitored the form accuracy using the ultra-high accurate 3-D profilometer (UA3P, Panasonic Corp.) to maintain it within the allowable tolerance range (< tens of nm). The polished off-axis mirror was optically tested using a visible laser source and a pinhole, and the airy pattern obtained from the polished mirror was compared with the unpolished case to check the influence of mid-frequency error on optical images.

• 동의생리병리학회지
• /
• 제24권4호
• /
• pp.533-542
• /
• 2010

Skin aging is a natural phenomenon. There are internal and external factors of skin aging. The internal factor of skin aging is from the wearing down of the body over time. The external factors are more noticeable from habits such as smoking, excessive alcohol, malnutrition, and extended exposure to UV rays. Completely stopping skin from aging is impossible but one can slow down and treat external signs of skin aging. In western medicine, the following methods are used to reduce the appearance of skin aging: applying lotions and creams containing ingredients such as fruit acid, antioxidants, plant exracts, depigmentation, moisturizer, retinoids, and sun block; botulinum toxin injections; chemical peels, laser and other painful methods remove the top layer of skin to promote new skin growth; fillers are injected to increase soft tissue growth; surgery. In oriental medicine, the following methods are used: acupuncture into facial muscles which stimulates acupuncture point; applying topical treatments and cosmetics containing herbs are effective of preventing skin aging and wrinkles. Above all thing, medicine that helps maintain essence and blood in the skin can be fundamental.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.52-57
• /
• 1999

Funtional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported by song etc. But a system which can build directly 3D parts of high performance functional material as metal part would need long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we tranlsated the wax patterns to numerous metal prototypes by new investment casting process combined conventional investment casting with rapid pototyping & rapid tooling process. with this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P part to metal part.

• 한국광학회지
• /
• 제18권6호
• /
• pp.441-446
• /
• 2007

OLED 소자는 유리기판과 공기 층의 경계면에서 발생하는 전반사와 ITO-유기층으로 형성되는 광도파로를 따라 진행하는 도파모드 결합으로 인해 내부에서 생성된 빛의 80% 이상이 외부로 추출되지 못하게 된다. 본 연구에서는 마이크로 렌즈 어레이와 회절격자 레지스트 층을 이용하여 소자 내부에서 손실되는 빛을 외부로 추출시킴으로써 OLED의 발광효율을 향상시킨다. 마이크로 렌즈 어레이를 이용하여 유리기판-공기 전반사로 인해 내부에 갇히는 빛을 외부로 출력시키고, ITO 와 유기물 사이에 회절격자 레지스트 층을 삽입하여 ITO-유기층 광도파로에 갇힌 빛들을 수직방향으로 추출될 수 있도록 하였다. 제작된 OLED 소자에 전류밀도 $20mA/cm^2$를 인가한 경우, 마이크로 렌즈 어레이를 적용한 OLED에서 22%의 효율 개선을 얻었고, 회절격자 레지스트 층을 가지는 OLED 의 경우 41%의 효율개선을 얻을 수 있었다.

• 한국광학회지
• /
• 제18권2호
• /
• pp.149-154
• /
• 2007

저가의 소자 개발이 가능한 나노임프린팅 공정을 도입하여 510 nm 주기의 브래그 격자 구조를 가지는 폴리머 광도파로 소자를 제작하였다. 폴리머 격자 광소자의 온도 의존성을 감소시키기 위한 방법으로 플라스틱 박막으로 이루어진 유연성 기판상에 브래그 격자를 제작하는 것이 필요하다. 임프린팅 공정을 손쉽게 수행하기 위한 광도파로 구조를 채택하였으며, 코아와 클래딩의 굴절률이 각각 1.540, 1.430인 폴리머를 이용하여 코아 두께가 $3{\mu}m$인 단일모드 광도파로 구조를 얻을 수 있었다. 유연성 기판 브래그 격자 광도파로 소자의 특성을 Si기판 브래그 격자 광도파로 소자와 비교하여 관측한 결과, 유연성 기판 도입에 따른 브래그 반사 소자의 성능 저하는 나타나지 않았다.

• 한방안이비인후피부과학회지
• /
• 제20권1호통권32호
• /
• pp.228-238
• /
• 2007

Objectives ; Sasang Constitional Medicine is a part of Korean traditional Medicine, and classify human constitution into four types. Scalp and hair is a part of skin. Skin is one of constitutional charasteristic element. So we researched a correlation between Sasang constitutions and Korean adult scalp and hair condition. This is a basic study to find constitution can be a important factor to care scalp and hair. Methods ; We examined Sasang constitutions and scalp and hair condition of 80 human who aged from 20-50. Scalp disease, dandruff was observed by video micro scope and sebum tape diagnosis. Thickness of hair was measured by Laser Scan Micrometer(LSM-3100). Itching sense and life habit was also investigated. Constitution diagnosis and scalp, hair diagnosis was investigated seperately as a blind test and the data was statistically analyzed with chi-square test, correlation analysis, one-way analysis of varience. Results ; 1. In Sasang Constitution, Taeumin group had significant tendency of oilily scalp. 70% of Taeumin group had oilily scalp. 2. The group of dry or oilily scalp had more itching sense and more sensativity of scalp compaired to neuter scalp group. 3. There was no correlation between height, weight, thickness of hair, itching sense, scalp disease and Sasang constitution. 4. There was correlation between loss of hair and drinking alcohol, obesity, curly hair, soft scalp. Conclusions ; Korean adult scalp and hair condition had correlation with Sasang constitution.

• 대한후두음성언어의학회지
• /
• 제31권1호
• /
• pp.27-30
• /
• 2020

Among lesions in the larynx, laryngeal contact granuloma due to persistent tissue irritation can typically be attributed to endotracheal intubation, vocal abuse, or gastro-esophageal reflux disease. Treatment typically includes voice therapy, lifestyle changes and use of anti-reflux medication. Microsurgical removal is only indicated in cases of severe dyspnea due to mass size. Foreign body granuloma is a response of to any foreign material in the tissue. Foreign body granulomas are sometimes misdiagnosed as soft tissue tumors when the causative foreign body is not initially found. Delayed treatment of these foreign bodies may cause complications. We present a case of larynx granuloma due to impacted foreign body, probably fish bone, in the larynx that mimicked contact granuloma. We initially used anti-reflux medication, but to no avail. The laryngeal mass, observed through laryngoscopy, showed no improvement and therefore necessitated a proper pathologic diagnosis. We were able to successfully treat it via trans-oral laser CO2 microsurgery before any complications developed.

• Journal of Gastric Cancer
• /
• 제19권2호
• /
• pp.165-172
• /
• 2019

Purpose: The robotic system for surgery was introduced to gastric cancer surgery in the early 2000s to overcome the shortcomings of laparoscopic surgery. The more recently introduced da Vinci $Xi^{(R)}$ system offers benefits allowing four-quadrant access, greater range of motion, and easier docking through an overhead boom rotation with laser targeting. We aimed to identify whether the $Xi^{(R)}$ system provides actual advantages over the $Si^{(R)}$ system in gastrectomy for gastric cancer by comparing the operative outcomes. Materials and Methods: We retrospectively reviewed all patients who underwent robotic gastrectomy as treatment for gastric cancer from March 2016 to March 2017. Patients' demographic data, perioperative information, and operative and pathological outcomes were collected and analyzed. Results: A total of 109 patients were included in the $Xi^{(R)}$ group and 179 in the $Si^{(R)}$ group. Demographic characteristics were similar in both groups. The mean operative time was 229.9 minutes in the $Xi^{(R)}$ group and 223.7 minutes in the $Si^{(R)}$ group. The mean estimated blood loss was 72.7 mL in the $Xi^{(R)}$ group and 62.1 mL in the $Si^{(R)}$ group. No patient in the $Xi^{(R)}$ group was converted to open or laparoscopy, while 3 patients in the $Si^{(R)}$ group were converted, 2 to open surgery and 1 to laparoscopy, this difference was not statistically significant. Bowel function was resumed 3 days after surgery, while soft diet was initiated 4 days after surgery. Conclusions: We found no difference in surgical outcomes after robotic gastrectomy for gastric cancer between the da Vinci $Xi^{(R)}$ and da Vinci $Si^{(R)}$ procedures.