• Journal of Aquaculture
• /
• v.21 no.3
• /
• pp.172-175
• /
• 2008

We evaluated storage stability of hydrogen peroxide, sodium hypochlorite, glutaraldehyde and didecyl dimethyl ammonium chloride (DDAC). Hydrogen peroxide and DDAC have been stabilized for 6-month storage at room temperature and $4^{\circ}C$ after opening. However sodium hypochlorite and glutaraldehyde were degraded to 15% and 39% for 6 month storage at $4^{\circ}C$ after opening, respectively. Therefore we have to take special attention wherever long term storing hydrogen peroxide and DDAC, also organic contents and pH in water should be considered for effective application in fish farms.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1083-1095
• /
• 2016

The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR) has been developed and the validation and verification (V&V) activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1), produced satisfactory results, which were used for the computer codes V&V, and the performance test results of the model pump in sodiumshowed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs) have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.363-369
• /
• 2011

To study the effect of incorporation of a surface crosslinking layer on a crosslinked poly (sodium acrylate) (cPSA) absorbent with ethylene glycol dimethacrylate CEGDMA), we synthesized several surface crosslinked cPSAs with EGDMA by an inverse emulsion polymerization method to delay the absorption of excess water in concrete, Liquid paraffin was used as a continuous phase. cPSA was synthesized with acrylic acid (AA) neutralized with aqueous 8 M sodium hydroxide solution as a monomer, N,N-methylene bisacrylamide (MBA) as crosslinking agent and ammonium persulfate (APS) and sodium metabisulfite (SMBS) as a redox initiator system by inverse emulsion polymerization. FTIR spectroscopy was used to characterize $Ca^{2+}$ ion interaction with cPSA and cPSA-EGDMAs. The swelling ratios of synthesized absorbents were evaluated from the absorption in deionized water, cement saturated aqueous solution and aqueous solution of calcium hydroxide (pH 12). Equilibrium swelling times for cPSA and surface crosslinked cPSA with EGDMA were 2 and 3 hrs, respectively. We also observed an increase in setting time of the cement and an increase in the compressive strength of mortar by addition of the synthesized cPSA-EGDMA.

• Journal of Nutrition and Health
• /
• v.6 no.4
• /
• pp.15-22
• /
• 1973

Sodium chloride plays an important role as the main condiment at daily meal. It is well known that humans require sodium chloride as an essential nutrient to keep the homeostasis of electrolytes. The amounts of salt intake may be a reflection of geography, culture and food habit rather than necessity. Lee has reported (1962) that Koreans ingest high amounts of sodium chloride in their meals, with an intake of excess carbohydrate (80-90% of total Calories) and low protein in their diet. This includes large amounts of rice, Kimchi and other fermented soybean products common in the Korean diet. This investigation was designed to study the dietary relations of sodium chloride to other nutrients in the Korean diet. Twenty four albino male rats, weighing from 290-300g, were divided into four dietary groups according to the amounts of carbohydrate, protein and fat in the basal diet. Each diet contained a rice powder as a carbohydrate source. Diet I was a control diet, Diet II, low protein, Diet III, low protein and low fat diet and Diet IV, low fat diet. All rats were provided with 3% sodium chloride solution. Diet and salt solution were given ad libitum. The experiment was carried out for 9 weeks during which time the body weight, the food intake, and 3% sodium chloride solution consumption were determined. At the 9th week, the urine was collected the blood sample from the artery of each rat for the analysis of sodium and potassium and other chemical studies. The rats were sacrificed and the kidney, adrenal, liver and spleen were measured, and observed changes of the pathological tissue in the kidney and adrenal. The results were summarized as follows: 1) The growth rate was higher in Diet I than in the other experimental diets (II, III and IV) after 4 weeks. There was no significant difference found between the experimental Diets II, III and IV. 2) The daily food intake was greater in the experimental diets II, III and IV than in the control diet. However, there was no difference among the high carbohydrate diets Diet II, III and IV. 3) The daily water (3% sodium chloride solution) intake was also greater in the Diets II, III and IV, than in the control diet. However, there was no difference between Diets II, III and IV. 4) The concentration of sodium and potassium in the blood were within the normal range in all diets. 5) The amount of sodium chloride in the urine was significantly greater in Diets II, III and IV than in the control diet. Diets II, III, IV had a larger amount of sodium solution consumption. 6) Observation of pathological tissue in the experimental diets found a cell proliferation in the glomerlulus of the kidney, while such change was not found in the control diet.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.336-341
• /
• 1995

Effect on alginate, pectin and Ca salts on textural properties of whole soybean gel(soygel) was investigated. The soygel was prepared by addition of sodium alginate, pectin and Ca salts into whole soy flour(300 mesh, WSF) suspension followed by through mixing. Addition of sodium alginate or pectin into WSF suspension significantly increased the hardness, adhesiveness and cohesiveness of the gel. The most uniform gel was obtained by $12{\sim}15%$ addition of sodium alginate or pectin, while their mixture rather decreased the textural properties. Sensory evaluation by ranking test for the gels showed that 12% sodium alginate and 0.125g $CaSO_4/g$ WSF produced the most desirable gel in terms of elasticity, uniformity, smoothness and total acceptability, followed by 12% sodium alginate and 0.12g Ca $gluconate-CaSO_4$(50 : 50). From the results, the optimal preparative conditions for soygel were suspension of WSF in 10 times of water(v/w), addition of 12% sodium alginate(w/w of WSF) and 12.5% $CaSO_4$ or Ca $gluconate-CaSO_4$(50 : 50) into WSF suspension followed by gel formation at $4^{\circ}C$.

• Solar Energy
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1991

In this research, Octacosane($C_{28}H_{58}$) and Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) were selected as latent heat storage materials to store off-peak electricity or waste heat of an industrial plant. Experimental analyses were performed in terms of the variation of phase change temperature and latent heat, phase change stability for the long term utilization. The results were as follows. 1. The phase change temperatures of industrial grade Octacosane and Sodium Acetate Trihydrate were $60.7^{\circ}C$ and $57.4^{\circ}C$, the latent heat were 60.6kcal/kg and 51.1kcal/kg respectively. 2. The latent heat quantity of Octacosane was decreased with the increasing number of phase change cycles. It decreased from 60.6kcal/kg to 47.2kcal/kg upto 200 cycles and then no variation was observed after 200 cycles. 3. To prevent the supercooling of Sodium Acetate Trihydrate, the nucleating agent, Sodium Pyrophosphate Decahydrate of 3 wt% was added, and then the supercooling temperature (Tm-Tsc) was decreased from $25.7^{\circ}C$ to $1^{\circ}C$. The phase separation was disappeared by the addition of CMC-Na of 3 wt% as a thickener. It was found that the optimal quantity of nucleating agent and thickener was 4wt% considering the stability of SAT as a latent heat storage material. 4. The phase change temperature of Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) was adjusted from 57.4 to $46.2^{\circ}C$ by the addition of UREA. And then the latent heat quantity was decreased from 51.1 to 38.3kcal/kg. 5. When the heat storage capacities between the sensible and latent heat storage materials were analyzed and compared in heating process from 30 to $90^{\circ}C$, the heat storage capacity of Octacosane was 2.45 times larger than water and 12.5 times than granite at $60.7^{\circ}C$, and the heat storage capacity of Sodium Acetate Trihydrate was 2.53 times larger than water and 12.91 times than granite at $57.4^{\circ}C$.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.120-123
• /
• 2000

The geopolymer technique may be a future-oriented technology for saving energies and resources. This technique requires 3 fundamental elements so-called filler, hardener and geopolymer liquor being generally an alkaline silicate solution. Quartz powder, water quenched granulated blast furnace slag and sodium silicate solution prepared from $Na_2O\cdot2SiO_2$were chosen for these three elements. After mixing these starting materials in appropriate proportions, monoliths were prepared by casting at room temperature. Strength tests showed the following results for 28d age speciment: 7.9-12.7 MPa in flexural strength and 20.2-32.8 MPa in compressive strength, depending on geopolymer liquor/solid ratio, P/S and fineness of the quartz powders used.

• Environmental Analysis Health and Toxicology
• /
• v.5 no.1_2
• /
• pp.37-44
• /
• 1990

Synthetic detergents and surfactants are in widespread usage as household and industrial detergents. Potential human toxic hazard arises following percutaneous absorption or oral ingestion of solution residues from kitchen and feeding utensils, fruits, and vegetables and contaminated water supplies. A toxicological investigations was performed with the synthetic detergents and surfactants [linear alkyl benzene sulfonate (LAS), ${\alpha}$-olefin sulfonate (AOS), sodium lauryl sulfonate (SLS), sodium lauryl ester sulfonate (SLES)］, In acute toxicity, agents were administered subcutaneously into ICR mice. In acute study, after lowering of spontaneous motility, respiratory failure, death appeared, vomitting was often associated with salivation and or retching. No sex difference was observed in LD$\sub$50/ of mice. In subacute toxicity, agents were administered orally into SD rats. Body weight increase was suppressed and there was no adverse effect on food and water consumption. The weight of organs were not changed by agents as compared with control group. No specific change was observed in biochemical and hematologicalor data.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2011-2015
• /
• 2013

To improve the water solubility of arylsulfonylimidazolidinone (JSH-2282), a potent anti-cancer agent, two urea derivatives, sodium (S)-2-(3-(4-(5-((S)-2-oxo-4-phenylimidazolidin-1-ylsulfonyl)indoline-1-carbonyl)-phenyl)ureido)succinate (2a) and sodium (S)-2-(3-(4-(5-((S)-2-oxo-4-phenylimidazolidin-1-ylsulfonyl)indoline-1-carbonyl)phenyl)ureido)pentanedioate (2b), were synthesized and studied for solubility and anti-cancer activity.

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.109-117
• /
• 1990

Magnetite for Water-based ferrofluid was synthesized by air oxidation of aqueous suspension in the pH range 7-12 at $65^{\circ}C$. The optimum condition of magneite formation was delineated by examining various physicochemcial properties such as Fe2+ content, phase characteristics, MHC and $\sigma$max. The point of zero charge of iron oxide powders obtained at various pH conditions were correlated with the oxidation state of Fe in the iron oxide. The magnetite powder prepared at pH 9 ws dispersed using sodium oleate and sodium dodecylbenzenesulfonate (SDBS) as dispersants, and the dispersion characteristics of the magnetite ferrofluid were examined by means of the fraction of solid dispersed, zeta potential data and FT-IR spectrum. A simple calculation on the potential energy of two interacting magnetite particles showed that the dispersion stability was directly correlated with height of the potential energy barrier or the shape of zeta potential.