• Food Science of Animal Resources
• /
• v.20 no.3
• /
• pp.199-206
• /
• 2000

축육 생산시 주요 부산물인 돼지 심장근으로부터 항산화제(0.02% propyl gallate, 0.2% asxorbic acid, 0.2% sodium tripolyphosphate) 첨가 세척액(25 mM phosphate buffer, pH 6.0)에 의해 제조된 surimi(5% protein 0.6 M NaCl, 25 mM phosphate buffer, pH 6.0)를 alginate(0.4%), calcium carbonate(0.075%) 및 lactate(0.6%) 등의 첨가에 의해 AC surimi 로 조제한 다음, CMC 또는 MC를 일정수준 (0.5%, 1.0%) 첨가하여 surimi 의 pH, 겔의 보수력과 조리 손실을 비롯하여 겔읨 루성을 비교 검톻였다. CMC 첨가시 pH는 0.2 단위씩 감소하는 경향을 보인데 비해 MC 첨가시에는 뚜렷한 변화를 보이지는 않았다. 조리 손실에 대한 영향을 살펴 본 결과 CMC와 MC 첨가구에서 0.5% CMC 첨가구를 제외하고서는 나머지 세 처리구에서 감소하는 경향이었고, 특히 MC 첨가시에는 대조구에 비해 뚜렷한 감소 경향을 나타내었으나(p<0.05) 첨가수준에 따른 차이는 나타나지 않았다 CMC나 MC의 첨가는 보수력에 대해서는 거의 영향을 미치지 않은 것으로 나타났고, 물성에 대한 측정 결과에서 CMC 첨가시에는 겔의 강도. 경도 및 탄성등은 약간 증가하였으나 유의적인 차이를 나타내지는 않았고 (P<0.05), MC 첨가시에는 뚜렷한 차이를 나타내지 않았으며, 겔 응집성에 대해서는 CMC와 MC 첨가에 의해 서로 다른 경향을 나타내었다.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.491-501
• /
• 2023

Comparing the effects of sodium tripolyphosphate (STPP) concentrations of 0.2% and 0.4% on beef semitendinosus is the objective of the current investigation. The samples were cooked at varied temperatures (45+60℃ and 45+70℃) and times (1.5+1.5 h and 3+3 h) using staged cooking. The colour properties, cooking loss, water retention, shear force, water-holding capacity, sarcoplasmic, and myofibrillar solubility, and total collagen were investigated. The cooking time and temperature affected the water-holding capacity, cooking loss, CIE L^*, CIE a^*, CIE b^*, myofibrillar, and sarcoplasmic solubility, with lower temperature and short time having the lower detrimental effect. However, the significant effect can be intensified after the addition of STPP with higher water-holding capacity and tender meat obtained with 0.4% phosphate concentration at any cooking conditions. The STPP lowered the collagen content and increased the protein solubility of myofibrillar and sarcoplasmic, which this degradation is used as a good indicator of tenderness.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.580-592
• /
• 2018

The formulation of an oil/water (o/w) emulsion made up of a mixture of perilla oil and canola oil (30/70 w/w) was optimized using a response surface methodology to find a replacement for animal fat in an emulsion-type meat product. A 12 run Plackett-Burman design (PBD) was applied to screen the effect of potential ingredients in the (o/w) emulsion, including polyglycerol polyricinoleate (PGPR), fish gelatin, soy protein isolate (SPI), sodium caseinate, carrageenan (CR), inulin (IN) and sodium tripolyphosphate. The PBD showed that SPI, CR and IN showed promise but required further optimization, and other ingredients did not affect the technological properties of the (o/w) emulsion. The PBD also showed that PGPR played a critical role in inhibiting an emulsion break. The level of PGPR was then fixed at 3.2% (w/w total emulsion) for an optimization study. A central composite design (CCD) was applied to optimize the addition levels of SPI, CR or IN in an (o/w) emulsion and to observe their effects on emulsion stability, cooking loss and the textural properties of a cooked meat emulsion. Significant interactions between SPI and CR increased the cooking loss in the meat emulsion. In contrast, IN showed interactions with SPI leading to a reduction in cooking loss. Thus, CR was also removed from the formulation. After optimization, the level of SPI (4.48% w/w) and IN (14% w/w) was validated, leading to a perilla-canola oil (o/w) emulsion with the ability to replace animal fat in an emulsion-type meat products.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.651-658
• /
• 1990

Starch phosphates were prepared by dry heating, gelatinizing method and extrusion process using sodium tripolyphosphote (STPP) as a substitution reagent and their physicochemical properities were compared. In the preparation of starch phosphate by dry heating method(DSP), the effect of reaction temperature was the most significant to the DS(Degree of substitution). In the phosphorylation reaction with gelatinized starch(GSP), the substitution ratio was increased with increasing the reaction temperature, but the increase was insignificant above $85^{\circ}C$. By extrusion with the corn starch containing 2.0% STPP at various moisture contents of 20, 25 and 30%, the DS values of extrudate(WESP) were within the range of between 0.0066 and 0.0083. The starch phosphate(DSP) products showed lowering the gelatinization temperature, increasing the clarity of the starch paste. However, WESP showed higher gelatinization temperature than that of raw starch. The starch phosphate prepared by extrusion process showed lower apparent viscosity of paste than that of the DSP at same condition. All of starch phosphates showed reducing the tendency of the paste retrogradation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.1021-1028
• /
• 2017

Objective: The objective of this study was to evaluate the effects of ageing time of lamb loins prior to freezing on technological characteristics and oxidation stability of coarse ground lamb loin sausage using in a model system. Methods: Lamb loins (M. longissimus lumborum, n = 25) were aged at $-1.5^{\circ}C$ for 0, 1, 2, 3, and 8 wk and then frozen for the remaining days (a total of 30 wk). The aged/frozen/thawed lamb loins were ground, and model sausages were formulated with 75% aged/frozen/thawed lamb loin, 25% water, 1.5% sodium chloride (NaCl) and 0.3% sodium tripolyphosphate. The pH and thaw/purge loss of aged/frozen/thawed lamb loins were evaluated, and protein functionality (protein solubility and emulsifying capacity), water-holding capacity and textural properties of model sausages were determined. Cooked model sausages were vacuum-packaged in a plastic bag and displayed under continuous fluorescent natural white light ($3^{\circ}C{\pm}1^{\circ}C$). Colour and lipid oxidation of the cooked model sausages were evaluated on 0 and 21 d of display storage. Results: Ageing prior to freezing had no impact on pH and purge/thaw loss of lamb loins and the colour of cooked sausages (p>0.05) made from the loins. Lamb loins aged for at least 3 wk prior to freezing numerically improved total and myofibrillar protein solubilities (p>0.05) and emulsion activity index (p = 0.009) of meat batter, but decreased cooking loss (p = 0.003) and lipid oxidation (p<0.05) of model sausages. Conclusion: This study suggests that post-mortem ageing of raw meat prior to freezing could improve water-holding capacity and lipid oxidative stability of sausage made from the meat.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.69-76
• /
• 1998

This study was investigated to determine the effect of additives and ionic strength on the functionality of extracted proteins in preblends in order to use less additive in restructured meat products. Preblends contained the combinations of sodium chloride (NaCl; 0, 4.5, 9.0%), sodium tripolyphosphate (STPP; 0, 2.5, 5.0%), and tetrasodium pyrophosphate (PP; 0, 2.44, 4.88%). The pH values increased linearly with increasing STPP and PP concentrations (p<0.01). In the equivalent ionic strengths, PP was more effective than STPP in increasing pH. Phosphate ions were more effective on total extractable protein (used 1 M NaCl buffer) than chloride ion at equivalent ionic strengths. Solubility was decreased by adding NaCl and increasing total extractable proteins. Meat sulfhydryl contents were high with increasing total extractable proteins. When protein extracts were heated at $65^{\circ}C$, 7 min, meat sulfhydryl contents decreased and surface hydrophobicity increased (p<0.01). However, all protein extracts showed no differences in SDS-PAGE pattern. In conclusion, PP is more effective than STPP in order to use less additive but there was no linear relationship between functionnal improvement and ionic strength.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.539-545
• /
• 2013

Effects of RS4 type resistant corn starch on the quality characteristics of cookies were investigated by physicochemical, instrumental and sensory evaluation. The resistant starch was made by cross-linking of corn starch as following; corn starch slurry was annealed at pH 2.0 and $50^{\circ}C$ for 2 h followed by the cross-linking reaction. The cross-linking reaction was performed at $50^{\circ}C$ for 12 h in the presence of 1.2%/st.ds NaOH, 10%/st.ds sodium sulfate and 10%/st.ds of sodium trimetaphosphate (STMP)/sodium tripolyphosphate (STPP) mixture. Dietary fiber content of the resistant starch was estimated to be 73.8% by the AOAC method. For quality characteristics, dough pH decreased with the increase of the resistant starch content and spread factor decreased a little at 20% of the resistant starch. The moisture content and L value of cookies increased with the increase of the resistant starch content. However, the hardness and fracturability decreased with the increase of the resistant starch content. In the sensory evaluation, no significant differences were observed between the two cookies with or without the resistant starch. The results of this study suggest that the RS4 type resistant corn starch can be a good ingredient to increase dietary fiber content in cookies without changes of their qualities.

• Journal of Animal Science and Technology
• /
• v.62 no.5
• /
• pp.713-729
• /
• 2020

The aim of this study was to develop retorted samgyetang marinated with different levels of soy sauce and processed at different F₀ (thermal death time at 121℃) values. The tested marinade series comprised different percentages of soy sauce in water (0%, 25%, and 50% [w/w]) containing a fixed concentration of sodium tripolyphosphate (0.3% [w/w]). Following marination, samgyetang was prepared and subjected to retort processing, until an F₀ value of either 8 or 29 was achieved. Meat quality analysis of the breast meat, sensory evaluation, and aroma analysis were performed as indicators of acceptability. The meat pH decreased as the soy sauce content increased, regardless of the F₀ value. The shear force value significantly decreased as the concentration of soy sauce increased, but increased as the F₀ value increased (p < 0.05). Lipid oxidation was not affected by marination, but increased significantly as the F₀ value increased (p < 0.05). The proportion of polyunsaturated fatty acids decreased significantly (p < 0.05) as the F₀ value increased. The total alkane content decreased as the F₀ value increased (p < 0.05). Changes in the total volatile sulfur compound and 2-butyl-1-octanol content were affected by soy sauce marination. Marination using 25% soy sauce and retort sterilization, until an F₀ value of either 8 or 29 was achieved, improved the acceptability of samgyetang. Therefore, marination using 25% soy sauce and retort sterilization until an F₀ value of 8 is the process recommended for developing a soy sauce-flavored, retorted samgyetang product of acceptable quality.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.317-333
• /
• 1996

The main goal of periodontal regeneration is to be achieved by epithelial exclusion, periodontal ligament cell activation or alveolar bone regeneration. The purpose of this study was to investigate on the physico- chemical and biological characteristics of biodegradable chitosan beads. Chitosan beads were fabricated by ionic gelation with sodium tripolyphosphate and they had the size in 300um diameter. As therapeutic agent, flurbiprofen was incorporated into the beads by 10, 20% loading contents. The release of drugs from the chitosan beads was measured in vitro. Also, biological activity tests of flurbiprofen loaded chitosan beads including cytotoxicity test, ihhibition of $IL-1{\beta}$ production, suppression to $PGE_2$ production, collagenase inhibition test, the ability of total protein synthesis, and tissue response were evaluated. The amount of flurbiprofen released from chitosan was 33-50% during 7 days. Minimal cytotoxicity was observed in chitosan beads. Flurbiprofen released from chitosan beads significantly suppressed the $IL-1{\beta}$ production of monocyte, $PGE_2$ production and markedly inhibited collagenase activity. Meanwhile, flurbiprofen released from this system showed increased ability for protein synthesis. Throughout 4 -week implantation period, no significant inflammatory cell infiltrated around chitosan bead and also fibroblast like cell types at the beads - tissue interface were revealed with gradual degradation of implanted chitosan beads. From these results, it was suggested that flurbiprofen loaded chitosan beads can be effectively useful for biocompatible local delivery system in periodontal regeneration.

• Journal of Veterinary Science
• /
• v.23 no.5
• /
• pp.78.1-78.13
• /
• 2022

Background: Florfenicol might be ineffective for treating Staphylococcus aureus small colony variants (SCVs) mastitis. Objectives: In this study, florfenicol-loaded chitosan (CS)-sodium tripolyphosphate (TPP) composite nanogels were prepared to allow targeted delivery to SCV infected sites. Methods: The formulation screening, the characteristics, in vitro release, antibacterial activity, therapeutic efficacy, and biosafety of the florfenicol composite nanogels were studied. Results: The optimized formulation was obtained when the CS and TPP were 10 and 5 mg/mL, respectively. The encapsulation efficiency, loading capacity, size, polydispersity index, and zeta potential of the optimized florfenicol composite nanogels were 87.3% ± 2.7%, 5.8% ± 1.4%, 280.3 ± 1.5 nm, 0.15 ± 0.03, and 36.3 ± 1.4 mv, respectively. Optical and scanning electron microscopy showed that spherical particles with a relatively uniform distribution and drugs might be incorporated in cross-linked polymeric networks. The in vitro release study showed that the florfenicol composite nanogels exhibited a biphasic pattern with the sustained release of 72.2% ± 1.8% at 48 h in pH 5.5 phosphate-buffered saline. The minimal inhibitory concentrations of commercial florfenicol solution and florfenicol composite nanogels against SCVs were 1 and 0.25 ㎍/mL, respectively. The time-killing curves and live-dead bacterial staining showed that the florfenicol composite nanogels were concentration-dependent. Furthermore, the florfenicol composite nanogels displayed good therapeutic efficacy against SCVs mastitis. Biological safety studies showed that the florfenicol composite nanogels might be a biocompatible preparation because of their non-toxic effects on the renal tissue and liver. Conclusions: Florfenicol composite nanogels might improve the treatment of SCV infections.