• Journal of Chest Surgery
• /
• v.32 no.11
• /
• pp.998-1003
• /
• 1999

Background: Bovine pericardium treated with glutaraldehyde(GA) is one of the most popular prosthetic materials. However, its late calcific degeneration after implantation results in early failure of the prosthesis. Therefore, we investigated the effects of combined treatment with sodium dodecyl sulfate(SDS) and glutamate on calcific degeneration of GA treated bovine pericardium. Material and Method: Sixty square-shaped pieces of bovine pericardia were fixed in 0.625% GA solution with 4g/L MgCl2.6H2O as a control group (group 1). Sixty pieces pretreated with 1% SDS (group 2) and sixty pieces posttreated with 8% glutamate (group 3) were also fixed in the same GA solution. Sixty pieces pretreated with 1% SDS and posttrated with 8% glutamate were also fixed in the same GA solution (group 4). After 1 month of fixation, the pieces were implanted into the belly of sixty Sprague-Dawley rat subdermally and were extracted 1 month, 2 months and 3 months after the implantation. With an atomic absorption spectrophotometry, we measured the calcium amount deposited. Result: The calcium deposition in 1 month was 2.01$\pm$0.13 mg/g in group 1, 1.45$\pm$0.31 mg/g in group 2, 2.49$\pm$0.15 mg/g in group 3 and 0.75$\pm$0.27 mg/g in group 4. In 2 months, it was 3.57$\pm$0.15 mg/g in group 1, 0.98$\pm$0.30 mg/g in group 2, 3.46$\pm$0.12 mg/g in group 3, and 1.48$\pm$0.39 mg/g in group 4, and 5.45$\pm$0.42 mg/g in group 1, 2.43$\pm$0.53 mg/g in group 2, 4.20$\pm$0.55 mg/g in group 3, and 1.02$\pm$0.27 mg/g in group 4 in 3 months. The calcium depositions in group 2 and 4 were less than those of group 1 and 3 in 1 month 2, months, and 3 months(p<0.01). The calcium depositions in group 1, 2 and 3 increased with time. However, they remained unchanged in group 4, which was statistically significant(p<0.01). Conclusion: Pretreatment with SDS is effective in reducing calcification of GA treated bovine pericardium, and the combined method of pretreatment with SDS and posttreatment with glutamate was more effective than the other methods.

• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.41-48
• /
• 1986

Band 3, the predominent 95,000 dalton anion transport protein, is the major intrinsic glycoprotein of the human erythrocyte membrane. This anion carrier exists as a dimer and binds the cytoskeletons such as spectrin, ankyrin and actin. And the liposomes are vesicular structures which form spontaneouly upon hydration of phospholipids. These artificial lipid vesicles have been investigated as model of the biological membranes and as a mean of improving the delivery of nucleic acids, drugs, proteins and biological substances to specific target tissues and cells. In this study, we were purified Band 3 from the human erythrocyte membrane(ghost) was prepared by hemolysis of intact human erythrocyte with weak alkali-hypotonic solution. Band 6 was removed from ghost by extracting with solution of an ionic strength of 0.15. Band 3 and Band 4 were solubilized selectively by extracting Band 6-depleted ghosts with Triton X-100 under nondenaturing conditions. Band 3 was then purified from Triton X-100 extract treated with p-chloromercuribenzoate by sucrose density gradient ultracentrifugation. This purified Band 3 was incorporated into liposomes prepared by reverse-phase evaporation. Phosphatidyl L-serine and cholesterol(1 : 1 molar ratio) were dissolved in chloroform and then chloroform was removed by rotatory evaporation under reduced pressure. Band 3 solution without Triton X-100 was introduced into a mixture of lipids and diethylether. Diethylether was subsequently removed by evaporation. This purified Band 3 and its incorporation into liposomes were confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.149-156
• /
• 2016

It has been well known that concrete structures exposed to chloride and sulfate attack environments lead to significant deterioration in their durability due to chloride ion and sulfate ion attack. The purpose of this experimental research is to evaluate the long-term durability against chloride ion and sulfate attack of the alkali activated cementless concrete replacing the cement with ground granulated blast furnace slag. For this purpose, the cementless concrete specimens were made for water-binder ratios of 40%, 45%, and 50%, respectively and then this specimens were cured in the water of $20{\pm}3^{\circ}C$ and immersed in fresh water, 10% sodium sulfate solution for 28, 91, 182, and 365 days, respectively. To evaluate the long-term durability to chloride ion and sulfate attack for the cementless concrete specimens, the diffusion coefficient for chloride ion and compressive strength ratio, mass change ratio, and length change ratio were measured according to the NT BUILD 492 and JSTM C 7401, respectively. It was observed from the test results that the resistance against chloride ion and sulfate attack of the cemetntless concrete were comparatively largely increased than those of OPC concrete irrespective of water-binder ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.893-896
• /
• 2008

As this study is to test fundamental properties of cement mortars using in Metakaolin. Recently concern is increasing for concrete durability because of an increase in the concrete structure exposed to bad environments. In the event that mineral admixture Added, microstructure will be fined, so durability can be good. Also, the study for new admixture is progressing expect that admixture widely used, for example, silica fume, fly-ash, and slag, etc. Therefore this study is making an experiment on fundamental properties of diversities sample curing at water, sea water, 10% sodium sulfate solution, and magnesium sulfate solution, to compare using for metakaolin with silica fume and fly-ash.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.51-61
• /
• 2010

Ettringite $(Ca_6[Al(OH)_6]_2(SO_4)_3{\cdot}26H_2O)$ is a sulfate mineral that shows a complicate property in concrete. It is often called as "a cancer of concrete" because secondary ettringite formation in hardened concrete often cause expansion and cracking of concrete due to its expansive crystal structure. In the present study, we tested the possibility for crystal growth inhibition of secondary ettringite by crystallization inhibitors that are commercially used for scaling inhibitors in Korea. For the test, we developed a method of ettringite solution synthesis. Three types of crystallization inhibitors were selected and examined the effects On ettringite growth inhibition. The experimental results of ettringite solution synthesis indicated that ettringite was successfully synthesized under condition that the mass balance between calcium hydroxide saturated solution and aluminum sulfate solution was attained. Monosulfate and semisulfate were synthesized when the ratio of $Ca^{2+}$ ions to ${SO_4}^{2+}$ ions was increased. The induction time of ettringite crystallization was less than 2 min. and crystallization was almost completed within an hour. The experimental results of ettringite crystallization inhibition showed that organic PBCT (2-Phosphonobutane-1,2,4-Tricarboxylic Acid) and inorganic SHMP (Sodium Hexametaphosphate) were relatively less effective on ettringite crystallization inhibition under experimental conditions. However, organic HEDP (1-Hydoxyethylidene-1,1-Diphosphonic Acid) effectively prevented ettringite growth with producing amorphous gel phase materials up to inhibitor concentration 0.1 vol.% of aluminum sulfate solution.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.1 no.1
• /
• pp.9-12
• /
• 1996

In order to produce the single chain precursor of a novel human insulin analogue, (B30-Homoserine) insulin, the fermentative behaviors of Escherichia coli JM103 were studied, which harbors pKBA plasmid carrying a hybrid gene in which the gene for a single chain precursor was fused with lacZ gene under tac promoter. The maximal induction of gene expression was achieved when more than 0.05 mM of isopropyl-$\beta$-D-thiogalactopyranoside(IPTG) was supplemented to fermentation medium after 4 h cultivation of E. coli, and followed by longer than 2-h fermentation. The hybrid protein of the single chain insulin precursor was isolated from cytoplasmic inclusion bodies by dissolving in 8M urea solution, and purified through DEAE-Sephacel and Sephadex G-200 column chromatographies with a recovery of 35%. The finally purified hybrid protein showed a single band on sodium dodecyl sulfate-polyacrylamide gel.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.2
• /
• pp.79-84
• /
• 1986

Methacrylic acid was graft polymerized with benzoyl peroxide in itiator onto the commercial PET film. Graft polymerization was carried out in emulsion, which consisted of BPO (1), chlorobenzene(8) as swelling agent, tween 80(1) and sodium lauryl sulfate(1) as emulsifier and water(1,000). Original PET film has poor reactivities and, so the film preswdled with benzyl alcohol($150^{\circ}C$, 1hr) was also examined. The graft yield of PET film was increased with reaction temperature and monomer concentration. The graft yield of preswelled PET film was higher than that of no-treated PET film. Moisture regain was linearly increased with graft yield. DSC thermodiagram showed the Tm of grafted PET film was same as that of original PET film. Grafted PET film was dyed with methylene blue solution. The photograph of the cross section showed that grafting was occured not at the center but near surfaces.

• Preventive Nutrition and Food Science
• /
• v.7 no.2
• /
• pp.184-187
• /
• 2002

Blood products from slaughterhouses that are not hygienically prepared for disposal or food consumption pose a human health hazard. Gamma irradiation is an effective method for sterilization of blood products, but may introduce changes in the molecular characteristics of proteins. This study evaluated the effects of irradiation on animal plasma proteins. Bovine and porcine blood was obtained from a slaughterhouse and the plasma proteins purified and lyophilized. The secondary structure and molecular weight distribution of the plasma protein solutions and powders were examined after ${\gamma}$-irradiation at 1, 5, 7 and 10 kGy. Gamma-irradiation affected the molecular properties of the protein solutions, but not the protein powders. Circular dichroism and sodium dodecyl sulfate-polyacrylamide gel electrophoresis studies showed that increased doses of ${\gamma}$-irradiation decrease the ordered structure of plasma proteins in solution, and cause initial fragmentation of the polypeptide chains and subsequent aggregation.

• Food Science of Animal Resources
• /
• v.21 no.3
• /
• pp.246-255
• /
• 2001

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of muscles extracted with distilled water, saline solution, SDS or Trition X-100 showed simular protein patterns between Hanwoo and Holstein meat, indicating that SDS-PAGE technique may not be useful for the identification between Hanwoo and Holstein meat. Lectine blot analysis of muscle extracted with distilled water demonstrated that Hanwoo and Holstein meat had similar affinities for concanavalin A (Con A), ricinus communis agglutinin (RCA-120), ulex europaeus agglutinin (UEA-1) or peanut agglutinin (PNA) lectins. However, approximately 32.1 kDa component of Hanwoo meat showed high affinity for dolichos biflorus agglutinin (DBA) lectin. On the contrary, high molecular weight components of Holstein meat had the specific affinity for wheat germ agglutinin (WGA) lectin. Hanwoo meat-specific components were observed by lectin staining of heat-denatured meat at 100$^{\circ}C$ for 30 sec. Also, the component of heat-denatured meat at 100$^{\circ}C$ for 30 sec, which was slightly smaller than Hanwoo meat-specific component, was concentrated specifically in Holstein meat.