탄소나노튜브는 높은 전기 전도성과 열 전도성을 가지며, 이러한 특성 때문에 21세기를 주도해 나갈 수 있는 차세대 첨단 소재로서 각광을 받고 있다. 또한 최근에는 나노공학기술의 발달로 인하여 획기적으로 높은 열전도도를 나타내는 다중벽 탄소나노튜브(Multi-walled Carbon Nanotubes, MWCNTs)의 대량 생산이 가능하게 되면서 다중벽 탄소나노튜브의 높은 열전도도 특성을 이용하여 탄소나노튜브를 기본 유체 및 기능성 유체에 안정하게 분산 시킨 후 이를 이용하고자 하는 연구가 활발히 진행되고 있으며, 탄소나노튜브를 유체에 안정하게 분산시키기 위한 방법으로는 기계적 분산법, 물리적 흡착에 의한 분산법, 화학적 개질에 의한 분산법이 있다. 따라서 본 연구에서는 이들 분산 방법과 탄소나노튜브 입자의 물성치에 따른 나노유체의 특성을 알아보기 위하여 나노유체의 열전도도와 점도 특성을 비교 분석하였다. 모든 물성치는 같지만 탄소나노튜브의 길이만 다른 두 종류의 다중벽 탄소나노튜브에 각각 계면 활성제(Sodium Dodecyl Sulfate, SDS) 100 wt%와 고분자 화합물(Polyvinyl Pyrrolidone, PVP) 300 wt%를 첨가하여 나노유체를 제조하였으며, 산화처리 된 다중벽 탄소나노튜브(Oxidized Multi-Walled Carbon Nanotubes, OMWCNTs)를 증류수에 초음파 분산하여 산화나노유체를 제조하였다. 나노유체의 열전도도는 전기 전도성 유체의 비정상 열선법(Transient Hot-wire Method)을 이용하여 측정하였고, 나노유체의 점도는 회전형 디지털 점도계를 이용하여 측정하였다. 실험 결과, 상온에서 동일 혼합비의 나노유체를 비교했을 때, 산화나노유체가 SDS 100 wt%, PVP 300 wt%를 혼합한 다른 나노유체보다 높은 열전도도 특성을 보였으며 점도 특성 또한 가장 낮은 것으로 측정되었다. 특히 상온에서 0.1vol%의 산화 CM-100 나노유체는 증류수보다 열전도도가 8.34%가 증가하였고, $10^{\circ}C$의 저온에서는 상온에서 증류수와 비교하여 측정된 열전도도 값보다 0.36%가 감소한 7.98%가 증가함을 보였다. 본 연구를 통하여 얻어진 결과는 높은 열전도도를 필요로 하는 열교환기의 작동유체나 기타 활용 분야에 대한 기초 자료로써 유용한 정보를 제공할 것이라 판단된다.
발색제로 eriochrome cyanine R(ECR)을 사용하여 여러 가지 계면활성제에서 스칸듐을 분광광도법으로 정량하는 방법과 그 착물의 조성을 연구하였다. Sc(III)-ECR 착물의 흡광도와 최대 흡수 파장은 cetyltrimethylammonium bromide (CTMAB)에서 크게 변하지만, sodium dodecyl sulfate(SDS)나 Triton X-100의 계면활성제에서는 변화가 없다. $1{\times}10^{-7}{\sim}3.0{\times}10^{-6}M$ Sc(III) 을 ECR 로 정량할 때는 pH 6.5 에서 $1{\times}10^{-3}M$ ECR 5ml와 $2{\times}10^{-4}M$ CTMAB 10ml가 필요했다. Sc(III)-ECR-CTMAB, 삼성분 착물의 몰흡광계수는 610nm에서 $5.6{\times}10^5mol^{-1}cm^{-1}L$이며 검출한계는 $1.0{\times}10^{-7}M$이었다. Sc(III)-ECR-CTMAB 삼성분 착물의 조성은 1:3:1 이었다.
계면활성제를 사용하여 지하수의 표면장력을 인위적으로 감소하였을 때, 감소된 표면장력이 지하수 폭기시의 폭기 영향권 및 VOC 제거 효율에 미치는 영향을 실험실 규모의 실험을 통하여 규명하였다. 내경 9.5 cm, 길이 100 cm의 유리 컬럼에 계면활성제(sodium dodecyl sulfate, SDS) 및 toluene 100 ppm 포함하는 물로 채운 후 일정한 속도로 공기를 주입하였을 때의 toluene의 제거 속도를 측정하였다. 또한 같은 컬럼에 토양(모래)이 채워진 상태에서 동일한 실험을 반복하였다. 토양이 존재하지 않는 상태에서의 stripping에 의한 toluene의 제거 속도는 표면장력의 감소(계면 활성제 농도의 증가)에 따라 증가하는 것으로 나타났으며, 토양이 존재하는 경우에도 비슷한 결과를 나타내었다. 2차원 유리 상자에 모래와 SBS를 포함하는 물을 채운 후 일정한 공기 유속을 유지하였을 때, 폭기의 영향권(공기의 침투영역)은 물의 표면장력 감소에 따라 현저히 증가하는 것으로 나타났다. 특히 SDS의 critical micelle concentration(CMC)보다 훨씬 낮은 농도에서 폭기 영향권이 최대화하는 것으로 밝혀졌다. 본 연구결과는 폭기에 의한 지하수 오염물질 중, 특히 휘발성 유기오염물질의 제거 공정의 효율을 증대하는데 기여할 것으로 생각된다.
Kim, Tae-Kyung;Yong, Hae In;Jung, Samooel;Sung, Jung-Min;Jang, Hae Won;Choi, Yun-Sang
Journal of Animal Science and Technology
/
제63권2호
/
pp.417-425
/
2021
The use of edible insects to replace meat protein is important to ensure future global food security. However, processed foods using edible insects require development to enhance consumer perception. Here, we examined the physicochemical characteristics and rheological properties of emulsions prepared from different edible insect larvae. Three edible insect species (Tenebrio molitor, Allomyrina dichotoma and Protaetia brevitarsis seulensis) were used to prepare larval emulsions that were formulated with 65% of insect larvae, 20% of pork back fat, and 15% ice. The A. dichotoma emulsion had the highest pH and lightness, redness, and yellowness values, while the T. molitor emulsion had the lowest pH and lightness, redness, and yellowness values. The T. molitor emulsion had the highest hardness, gumminess, chewiness, and apparent viscosity values but the lowest springiness and cohesiveness values. According to the sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis, T. molitor had the thickest bands, followed by P. brevitarsis seulensis. The differential scanning calorimetry distributions for the T. molitor and A. dichotoma emulsions showed one peak, while that of the P. brevitarsis seulensis emulsion had two peaks. The collective results suggest that T. molitor was the most suitable candidate (of the three tested species) for use as a meat replacement in terms of its physicochemical and rheological properties. It is important that such properties of insect-based emulsions are maintained using various technologies.
Suleiman D Allison;Nur AdeelaYasid;Fairolniza Mohd Shariff; Nor'Aini Abdul Rahman
Journal of Microbiology and Biotechnology
/
제34권2호
/
pp.436-456
/
2024
Several thermostable proteases have been identified, yet only a handful have undergone the processes of cloning, comprehensive characterization, and full exploitation in various industrial applications. Our primary aim in this study was to clone a thermostable alkaline protease from a thermophilic bacterium and assess its potential for use in various industries. The research involved the amplification of the SpSKF4 protease gene, a thermostable alkaline serine protease obtained from the Geobacillus thermoglucosidasius SKF4 bacterium through polymerase chain reaction (PCR). The purified recombinant SpSKF4 protease was characterized, followed by evaluation of its possible industrial applications. The analysis of the gene sequence revealed an open reading frame (ORF) consisting of 1,206 bp, coding for a protein containing 401 amino acids. The cloned gene was expressed in Escherichia coli. The molecular weight of the enzyme was measured at 28 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The partially purified enzyme has its highest activity at a pH of 10 and a temperature of 80℃. In addition, the enzyme showed a half-life of 15 h at 80℃, and there was a 60% increase in its activity at 10 mM Ca2+ concentration. The activity of the protease was completely inhibited (100%) by phenylmethylsulfonyl fluoride (PMSF); however, the addition of sodium dodecyl sulfate (SDS) resulted in a 20% increase in activity. The enzyme was also stable in various organic solvents and in certain commercial detergents. Furthermore, the enzyme exhibited strong potential for industrial use, particularly as a detergent additive and for facilitating the recovery of silver from X-ray film.
Gilson Khang;Park, Hak-Soo;John M. Rhee;Yoon, Sung-Chul;Cho, Jin-Cheol;Lee, Hai-Bang
Macromolecular Research
/
제8권6호
/
pp.253-260
/
2000
Biodegradable wafers were prepared with poly (hydroxybutyrate-co-hydroxyvalerate) (PHBV;5, 10, and 15 mole% for 3-hydroxyvalerate) by simple heat pressing method for the sustained release of antibiotic agent, gentamicin sulfate (GS) to investigate the possibility of the treatment for osteomyelitis. The effects of hydroxyvalerate (HV) content, thickness of wafers, various types of additives such as sodium dodecyl sulfate (SDS), microcrystalline cellulose, polyvinylpyrrolidone, and hydroxypropylcellulose (HPC), and different initial drug loading ratio on the release profile have been investigated. In vitro release studies showed that different release patterns and rates could be achieved by simply modifying factors in the preparation conditions. PHBV wafers with 3 mm thickness, 10% of GS initial loading, 15% of HV content and addition of 5% of SDS and HPC were free from initial burst and a near-zero-order sustained release was observed for over 30 days. It might be suggested that the mechanisms of G5 release may be more predominant simple dissolution and diffusion of GS than erosion of PHBV in our system.
The fluorescence intensity rations (F2.F1) of excimer (F2) to monomer (F1) of pyrene were measured as a function of the concentration of sodium dodecyl sulfate (SDS). It was found that there were not gross changes in size and shape of sphere-shape micelles in the first micelle concentration, while at concentrations above the second critical micelle concentration (CMC) the micelles grew in size with increasing concentration. Fluorescence intensities of 8-anilinonaphthalene 1-sulfonate (ANS) were also monitored as a micellar probe with varying concentrations of SDS. Results suggested that a phase transition from sphere-shaped micelles to hemicapped rod-like micelles occurred at the second CMC (17). A general formula for the axial ratio of ellip-soil-shaped micelle in the first micelle concentration was suggested. According to this general formula, the axial ratio of SDS, sodium lauryl ether sulfate and sodium laurate were 1:1, 5:2, and 5:3, respectively. The electrolyte-induced phase transition from spherical to hemicapped rod-like micelles occurred and the size of hemicapped rod-like micelles grew with increasing electrolyte concentrations. The maximum concentrations of solubilzed benzene in sphere-shaped micelles and hemicapped rod-like micelles were measured by differential spectrohpotometry. The hemicapped rod-like micelles in the presence of electrolytes grew in size with increasing amount of benzene solubilized.
A proposed method of determining the composition of mixed micelles in equilibrium with monomer of known composition is described. The systems were sodium ${\alpha}-sulfonated$ dodecanoyl ethyl esther (${\alpha}-SR_{12}Et$) or sodium dodecyl sulfate(SDS)-polyoxyethylene 23 lauryl ether (Brij 35) un water and in 0.1M sodium chloride solution at $25^{\circ}C$. This technique applies the Gibbs-Duhem equation to the mixed micelles, which is treated as a pseudophase. This proposed methodology, which needs only critical micelle concentration data as a function of monomer composition, is applied to an anionic/nonionic surfactant pair. The calculated monomer-micelle equilibrium is found to be very similar to the much-used regular solution for nonideal systems.
Background: Bovine pericardium treated with glutaraldehyde(GA) is one of the most popular prosthetic materials. However, its late calcific degeneration after implantation results in early failure of the prosthesis. Therefore, we investigated the effects of combined treatment with sodium dodecyl sulfate(SDS) and glutamate on calcific degeneration of GA treated bovine pericardium. Material and Method: Sixty square-shaped pieces of bovine pericardia were fixed in 0.625% GA solution with 4g/L MgCl2.6H2O as a control group (group 1). Sixty pieces pretreated with 1% SDS (group 2) and sixty pieces posttreated with 8% glutamate (group 3) were also fixed in the same GA solution. Sixty pieces pretreated with 1% SDS and posttrated with 8% glutamate were also fixed in the same GA solution (group 4). After 1 month of fixation, the pieces were implanted into the belly of sixty Sprague-Dawley rat subdermally and were extracted 1 month, 2 months and 3 months after the implantation. With an atomic absorption spectrophotometry, we measured the calcium amount deposited. Result: The calcium deposition in 1 month was 2.01$\pm$0.13 mg/g in group 1, 1.45$\pm$0.31 mg/g in group 2, 2.49$\pm$0.15 mg/g in group 3 and 0.75$\pm$0.27 mg/g in group 4. In 2 months, it was 3.57$\pm$0.15 mg/g in group 1, 0.98$\pm$0.30 mg/g in group 2, 3.46$\pm$0.12 mg/g in group 3, and 1.48$\pm$0.39 mg/g in group 4, and 5.45$\pm$0.42 mg/g in group 1, 2.43$\pm$0.53 mg/g in group 2, 4.20$\pm$0.55 mg/g in group 3, and 1.02$\pm$0.27 mg/g in group 4 in 3 months. The calcium depositions in group 2 and 4 were less than those of group 1 and 3 in 1 month 2, months, and 3 months(p<0.01). The calcium depositions in group 1, 2 and 3 increased with time. However, they remained unchanged in group 4, which was statistically significant(p<0.01). Conclusion: Pretreatment with SDS is effective in reducing calcification of GA treated bovine pericardium, and the combined method of pretreatment with SDS and posttreatment with glutamate was more effective than the other methods.
자화수는 물분자의 수소결합에 의한 배열이 특이한 구조를 갖게 됨에 따라 다양한 물리 화학적 성질을 나타낸다. 본 연구에서는 자화수가 계면활성제의 임계미셀농도 (critical micelle concentrations, CMC) 변화에 미치는 영향을 다음과 같이 관찰하였다. $25\;{^{\circ}C}$에서 전도도계(conductivity meter)를 이용하여 음이온 계면활성제인 SDS (sodium dodecyl sulfate)와 양이온 계면활성제인 CTAB (cetyltrimethylammonium bromide)의 CMC를 측정하였고, 표면장력계를 사용하여 SDS와 CTAB 그리고, 비이온 계면활성제인 Pluronic F-68의 CMC를 측정하였다. 또한 Isothermal titration calorimeter (ITC)를 이용하여 $25\;{^{\circ}C}$에서 SDS의 열량변화를 측정하여 CMC의 변화율을 측 정하였다. 결과적으로, 자화수에서 계면활성제의 CMC는 증류수에 비해 현저하게 낮아지는 경 향을 보였는데, SDS는 자화수에서 약 $2.7{\sim}6.5$% 정도 낮아짐을 보였고, CTAB는 자화수에서 약 $2.3{\sim}3.0$% 정도 낮아짐을 보였으며, Pluronic F-68은 자화수에서 약 24.2% 정도 낮아짐을 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.