• 약학회지
• /
• 제33권4호
• /
• pp.211-218
• /
• 1989

Twenty-six injectable drug products, many of which are administered by i.v. infusion, were studied for loss from aqueous solutions stored in polyvinyl chloride (PVC) infusion bags for various periods of time. The PVC infusion bags were stored in the dark room at room temperature for up to one month. Drugs stored in glass bottle served as controls. The solutions were assayed Spectrophotometrically at regular intervals. The effect of drug concentration and pH on the loss of drug from solution were studied. Octanol-water partition coefficients were used as a guage of lipid solubility of drugs. The elution of di(2-ethylhexyl)phthalate(DEHT) from PVC infusion bags was studied. For most of the drug studied, minimal loss from the aqueous solutions were observed over periods of storage time. Six of the drug products - Thiopental sodium, Hydralazine HCl, Thioridazine HCl, Trifluoperazine 2HCl, Metronidazole, Chlorpromazine HCl - were found to be lost a substantial extent. DEHP was found to be migrating from PVC infusion bags.

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.163-169
• /
• 2014

The corrosion resistance of epoxy-coated carbon steel was evaluated. The carbon steel surface was subjected to different treatment methods such as steel grit blasting and power tool treatment as well as contamination of water soluble salt. To study the effect of the surface treatments and contamination, the topology of the treated surface was observed by confocal microscopy and a pull-off adhesion test was conducted. The corrosion resistance of the epoxy-coated carbon steel was further examined by electrochemical impedance spectroscopy (EIS) combined with immersion test of 3.5 wt% of NaCl solution. Consequently, the surface contamination by sodium chloride with $16mg/m^2$, $48mg/m^2$ and $96mg/m^2$ didn't affect the adhesion strength for current epoxy coated carbon steel and blister and rust were not observed on the surface of epoxy coating contaminated by various concentration of sodium chloride after 20 weeks of immersion in 3.5 wt% NaCl aqueous solutions. In addition, the results of EIS test showed that the epoxy-coated carbon steel treated with steel grit blasting and power tool showed similar corrosion protection performance and surface cleanness such as Sa 3 and Sa 2.5 didn't affect the corrosion protectiveness of epoxy coated carbon steel.

• 한국결정성장학회지
• /
• 제27권6호
• /
• pp.303-308
• /
• 2017

여러 가지 금속을 에칭하기 위하여 사용된 $FeCl_3$ 폐용액은 유가금속인 니켈을 함유하고 있다. 본 연구에서는 염화철을 재생하고 남은 니켈 함유 에칭폐액으로부터 니켈을 고순도의 탄산니켈 결정분말로 회수하고자 하였다. 5 % NaOH 수용액을 이용하여 pH 4의 조건에서 1차적으로 철 성분의 불순물을 약 97 % 제거하고 추가적으로 남은 불순물을 제거하기 위하여 용매추출제 D2EHPA(Di-(2-ethylhexyl) phosphoric acid)를 사용하여 불순물로서 존재하는 금속이온들을 약 99% 제거하였다. 그 후 불순물이 제거된 염화니켈 용액에 탄산나트륨과의 반응을 통하여 99.9 % 이상의 순도를 가진 탄산니켈분말을 얻을 수 있었다.

• 공업화학
• /
• 제9권2호
• /
• pp.177-184
• /
• 1998

분체 형태의 소수성 고분자 polymethylmethacrylate(PMMA), poly vinyl chloride(PVC)와 친수성 금속 aluminium에 대한 water, glycerol, formamide, diiodomethane, 1,1,2,2-tetrabromoethane, 1-bromonaphthalene, acetone, chloroform, benzene, ethanol과 methanol과의 접촉각을 Washburn식을 기본으로 한 wicking법으로 측정하였다. 또한, 농도에 따른 음이온 계면활성제 SDS(sodium dodecyl sulfate)와 양이온 계면활성제 CTAB(cetyl trimethylamonium bromide) 수용액과의 접촉각을 측정하였다. 유기액체들과의 측정된 접촉각으로부터 Zisman plot을 사용하여 임계표면장력, ${\gamma}_c$를 예측하였으며, 농도에 따른 계면활성제 SDS와 CTAB수용액과의 접촉각으로부터 adhesion tension plot을 사용하여 ${\gamma}_c$를 예측하였다. 유기액체, 계면활성제 SDS와 CTAB수용액에 대해서 분체 PMMA의 ${\gamma}_c$는 각각 43.5, 28.3과 $36.2mNm^{-1}$이며, 분체 PVC의 ${\gamma}_c$는 각각 44.2, 28.0과 $34.8mNm^{-1}$값을 얻었다. 이로부터, 고체 표면의 적심성과 성질이 계면활성제의 첨가에 의해 변화됨을 알 수 있었다. 또한, 측정된 접촉각으로부터 조화평균식을 사용하여 각 고체의 표면자유에너지. ${\gamma}_s$와 그 성분 값들을 결정하였다.

• 폴리머
• /
• 제25권2호
• /
• pp.263-269
• /
• 2001

나트륨 몬모릴로나이트($Na^{+}$-MMT)의 양이온을 3-(methacryloyl amino) propyl trimethyl ammonium chloride (MAPTAC)와 교환반응시켜 몬모릴로나이트의 표면을 친유성으로 개질시키는 동시에, 단량체와 공중합을 할 수 있는 이중결합이 부착된 MAPTAC-MMT를 제조하였다. 상온에서 MAPTAC-MMT가 분산된 수용액에서 N-isopropyl acryl amide (NIPAM)를 중합하여 열응답성 나노복합재료(PNIPAM-MMT)를 제조하였다. MAPTAC-MMT으로부터 제조된 열응답성 나노복합재료는 열응답성 고분자인 poly(N-isopropyl acrylamide) (PNIPAM)와 마찬가지 하한임계용액온도(LCST)를 나타내었으며, MAPTAC-MMT의 양이 증가함에 따라 PNIPAM-MMT의 LCST는 감소하였다. 또한 TGA실험 결과에서 열응답성 나노복합재료의 열안정성이 열응답성 고분자에 비하여 우수하였음을 보였다.

• 한국재료학회지
• /
• 제34권5호
• /
• pp.247-253
• /
• 2024

The separation of zirconium and hafnium using tributyl phosphate (TBP)-Dodecane extractants in nitric acid medium was performed. Zirconium oxychloride, used as extraction feed, was obtained from the synthesis of Kalimantan zircon sand concentrate smelted using NaOH. The extraction process was carried out by dissolving chloride-based metals in nitric acid media in the presence of sodium nitrate using TBP-Dodecane as an extractant. Some of the extraction parameters carried out in this study include variations in organic phase and aqueous phase (O/A), variations in contact time, and variations in nitric acid concentration. Extraction was carried out using a mechanical shaker according to the parameter conditions. X-ray fluorescence (XRF) was used for elemental (Zr and Hf) composition analysis of the aqueous solution. The results showed that zirconium was separated from hafnium at optimum conditions with an organic/aqueous ratio of 1:5, contact time of 75 min, and an HNO₃ concentration of 7 M. The resulting separation factor of zirconium and hafnium using TBP-Dodecane was 14.4887.

• Bulletin of the Korean Chemical Society
• /
• 제3권1호
• /
• pp.23-30
• /
• 1982

For the study of transport phenomena of an aqueous NaCl solution through a cuprophane membrane, a new apparatus was constructed. The volumc flow rate Q, the permeability coefficient U, and the permeability constant K were measured or determined by using this apparatus. The experimental temperature range was 5 to $35^{\circ}C$, and the applied pressure increments were 10 to 40 psi. By assuming that the cuprophane membrane is composed of n parallel cylindrical capillaries of circular cross-section and that the flow of the solution through the capillaries follows the Poiseulle law, the mean radius r of the capillaries and the number n of the latter in the membrane were evaluated. By using a reasonable assumption concerning the radius ${\eta}'$ of the species diffusing through the membrane, it was concluded that the contribution of the diffusive flow to the total flow rate Q is less than 10%. Thus, the Q was treated as the rate due to the viscous flow, and the viscosity ${\eta}_m$ of the solution in the membrane phase was evaluted, and it was found that ηm is nearly equal to ${\eta}_b$, the bulk viscosity of the solution. From this fact, it was concluded that in the capillaries, no change occurs in the physical state of the NaCl solution. The value of ( = 4.27 kcal/mole) and ${\Delta}Sm^{\neq}$(4.28 eu) were obtained for the viscous flow. A possible explanation was given.

• Membrane and Water Treatment
• /
• 제8권3호
• /
• pp.225-244
• /
• 2017

A novel thin-film nanocomposite (TFN) reverse osmosis (RO)/non-woven fabric (NWF) membrane was prepared by adding zinc oxide (ZnO) nanospheres ($30{\pm}10nm$) during the interfacial polymerization process of m-phenylenediamine (MPD) and trimesoyl chloride (TMC) on self-made polysulfone (PSF) membrane/polyester (PET) non-woven fabric support. The improved performance of TFN RO membrane was verified in terms of water contact angle (WCA), water flux, salt rejection, antifouling properties and chlorine resistance. The results showed that the WCA value of TFN RO surface had a continuous decrease with the increasing of ZnO content in MPD aqueous solution. The water flux of composite TFN RO membranes acquired a remarkable increase with a stable high solute rejection (94.5 %) in $1g{\cdot}L^{-1}$ NaCl aqueous solution under the optimized addition amount of ZnO (1 wt%). The continuous testing of membrane separation performance after the immersion in sodium hypochlorite solution indicated that the introduction of ZnO nanospheres also dramatically enhanced the antifouling properties and the chlorine resistance of composite RO membranes.

• 대한화학회지
• /
• 제46권6호
• /
• pp.495-501
• /
• 2002

Sodium n-Octanoate(SOC)와 n-Octylammonium Chloride(OAC)의 혼합마이셀화에 대하여 연구하기 위하여 임계마이셀농도(CMC)와 반대이온 결합상수(B)값을 SOC의 겉보기 몰분율($\alpha_1$)을 변화시키면서 측정하였다. SOC/OAC 혼합시스템의 마이셀화에 대한 여러 가지 열역학적 함수값($x_i$, $Y_i$, $C_i$, ${\alpha}_i^M$ 및 ${\Delta}H_{mix}$)을 비이상적 혼합마이셀화 모델에 의하여 계산하고 분석하였다. 그 결과 이러한 혼합계면활성제의 마이셀화는 이상적 거동으로부터 큰 음의 벗어남을 알 수 있었다. 그리고 SOC,OAC 및 그들 혼합체($\alpha_1$=0.5)의 마이셀화에 대한 열역학적 함수값(${\Delta}G^0_m$, ${\Delta}H^0_m$ 및 ${\Delta}S^0_m$)을 계산하기 위하여 온도에 따른 CMC 및 B 값의 변화를 측정하였다. 이러한 변화로부터 계산한 열역학적 함수값을 상호 비교함으로써 순수 및 혼합계면활성제의 마이셀화에 대하여 분석하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.229-229
• /
• 2007