• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.117-121
• /
• 2000

Er-doped sodiumborosilicate glass films for waveguides amplifier were fabricated by Aerosol Flame Deposition(AFD) method. Al2O3 was added to sodium borosilicate glass films to suppress the formation of crystalline phase and control the refractive index. the formation of crystalline phase was suppressed above Al2O3 of 6 wt%. As the amount of Al2O3 increased from 2 to 12 wt% the refractive index of glass films increased lineary from 1.4595 up to 1.4710. After the core of 77SiO2-15B2O3-8Na2O＋6 wt%Al2O3＋8wt%Er2O3 was coated on the buffer layer of 77SiO2-15B2O3-8Na2O＋6 wt%Al2O3, the core was etched by reactive ion etching. The absorption spectrum of 3 cm waveguide amplifier showed two peaks of 1530 and 1550 nm.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.946-953
• /
• 1999

The etching characteristics of Er-doped sodium borosilicate glass film for the planar optical waveguides were investigated using reactive ion etching. The etch rate decreased as the pressure in creased but increased as the RF power increased. The etch rate increased as the flow rate C2F gas and the amount of O2 addition increased but decreased over critical point (C2F6 7,5 accm O2 20%) The etch rate was 180${\AA}$/min under C2F6 7.5 sccm O2 20% RF power 270 W, pressure 150 mTorr. With this optimum etching condition and subsequent heat treatment at 975$^{\circ}C$ for 30 minutes planar optical waveguides having improved sidewall roughness were fabricated successfully.

• The Korean Journal of Ceramics
• /
• 제1권2호
• /
• pp.96-100
• /
• 1995

Recently, alumina/glass composites have been applied as a substrate material for hybrid IC and LSI multi-chip packaging. In this study, the characterization of sodium borosilicate glasses containing NaF and $AlF_3$ and the preparation of the resulted glass/alumina composites have been examined and the effect of the addition of fluorides on the thermal. and dielectric properties of the sintered composites have been studied. The sintering temperature of specimens was lowered by about 100-$150^{\circ}C$ by the addition of fluorine compared with the specimens without fluorine. The specimens containing fluorine showed slightly lower dielectric constants than those of the specimens without fluorine.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.481-486
• /
• 2008

나트륨(Na) 함유량이 다른 세 종류의 유리관인 Borosilicate($Na_2O$ 4%), Soda-Lime($Na_2O$ 14%), 그리고 Aluminosilicate($Na_2O$ 0.06%) 유리관의 방전 실험을 통하여 유리관 내벽의 흑화를 관측하였다. 수은 혼합기체(Ne+Ar+Hg)의 방전에서 나트륨 함유량이 많은 유리관일수록 흑화가 심하게 나타난다. 무수은 가스(Ne+Ar)의 방전에서는 흑화가 나타나지 않는다. 나트륨 함유량이 많은 수은 방전 램프에서 봉입 기체의 압력이 작을수록 흑화의 정도가 커진다. 흑화 방지재를 도포한 유리관은 흑화가 미약하게 나타난다. 이 실험을 통하여 흑화는 유리재의 나트륨 성분과 수은 이온의 결합에 의한 아말감($NaHg_2$)이 유리관 내벽에 형성된 것으로 분석된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.367-370
• /
• 2007

An EEFL with the sodium free alumino-silicate glass of high K and low $tan{\delta}$, has been investigated. As compared with borosilicate and the soda-lime EEFLs, the luminous efficiency as well as the pinhole stability of new EEFLs improves remarkably without blackening of $NaHg_2$.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.521-531
• /
• 1989

The dependence of the chemical durability of simulated waste glasses containing the simplified waste similar to the SRP waste on compositions of host glasses, amounts of waste loading, and kinds of leachants has been investigated as a basic study on the waste immobilization through vitrification. The maximum limit of the amount of waste loading for glassforming with the host sodium borosilicate glasses selected in this study was 50wt%. The chemical durability of waste glasses whose host glass belonged to the immiscible composition region was much higher than that of waste glasses whose host glass belonged to the miscible composition region. The former waste glass showed lower chemical durability in deionized and silicate waters than in brine, while the latter glass showed the lowest chemical durability in deionized and silicate waters than in brine, while the latter glass showed the lowest chemical durability in silicate water. It was also observed that the total leaching rates in brine were noticeably small in comparison with those in other solutions. The composition of the host borosilicate glass which was suitable for the treatment of the waste through vitrification was found to be 25 Na2O-5B2O3-70SiO2(wt.%).

• 한국재료학회지
• /
• 제8권8호
• /
• pp.693-698
• /
• 1998

$AI_{2}$$O_{3}$와 $Na_{2}$O가 AFD법에 의해 제조된 sodium borosilicate 유리박막의 특성에 미치는 영향을 조사하였다. $AI_{2}$$O_{3}$함량이 증가함에 따라 $66SiO_2-27B_2O_3-7Na_2O$유리박막의 상분리는 억제되었으며, 6.0wt%의$ AI_{2}$$O_{3}$가 첨가되었을 때 공기중 급냉조건하에서 상분리가 없는 유리박막이 얻어졌다. $AI_{2}$$O_{3}$함량이 1.5에서 6.0wt%로 증가함에 따라 유리박막의 굴절율은 1.4610에서 1.4701로 선형적으로 증가하였으며, 복굴절률을 나타내는 TE 모드와 TM 모드의 차이도 점차적으로 증가하였다. 그러나 복굴절률은 유리박막을 전이온도 이하에서 재열처리함으로써 감소시킬 수 있었다. $66SiO_2-27B_2O_3-7Na_2O$+6wt% $AI_{2}$$O_{3}$에 $Na_2O$의 함량을 증가시켜 Na2O/B2O3가 0.23, 0.34, 0.45, 0.56인 유리박막을 제작하였다. Na2O/B2O3의 비가 증가함에 유리박막의 굴절율 및 복굴절률은 증가하는 경향이 있었다. 또한 $Na_2O/B_2O_3$의 비가 증가함에 따라 유리박막의 상분리는 가속화되었다.

• 한국세라믹학회지
• /
• 제25권2호
• /
• pp.173-183
• /
• 1988

Effects of oxide additives such as MoO3, MnO2 ZrO2 and Fe2O3 on the phase separation and the chemical durability of sodium borosilicate glasses which are the host of waste glasses have been investigated as the basic study on the nuclear-waste immobilization through vitrification. MoO3 and MnO2 were found to be phase separation promotors which increased the temperature as well as catalyzed nucleation and growth for the phase separation of the 10Na2-O-3OB2O3-6OSiO2 (wt%) parent glass within the immiscibility region. The glasses had the interconnected phase-separated structure as the amount of addition increased. On the other hand, ZrO2 and Fe2O3 were inhibitors which showed the reverse effects to the above promotors. It was also found that addition of MoO3 could cause the phase separaton of the 20Na2O-10B2O3-70SiO2(wt%) glass even within the miscibility region. Addition of ZrO2 and Fe2O3 increased the chemical durability of the parent glass within the immiscibility region. Within the miscibility region, however, the addition of 1.96 wt % of MoO3 increased the chemical durability considerably, while MnO2 had little effects.

• 한국표면공학회지
• /
• 제34권3호
• /
• pp.240-246
• /
• 2001

The possibility of using a glass block with the composition of sodium borosilicate as starting materials for GRIN glass was examined from the view points of the phase separation of the matrix glass, the effects of leaching and the heating conditions for a porous structure, and the change in the refractive index. Glass specimens with similar compositions were prepared in the form of porous glass using a phase-separation technique. An examination of the heating and leaching conditions and the microstructure dependence of these conditions was made.; Specimens with porous structure were obtained when the heat treatment and leaching conditions were fixed at $540^{\circ}C$ for 30hrs and in a 0.3N$ H_2$$SO_4$ solution at $100^{\circ}C$, respectively. The resultant specimens had some important features on the GRIN glass.; the depth of the gradient and the change in refractive index (Δn) were 4mm and 0.015~0.02, respectively.

• 한국표면공학회지
• /
• 제28권5호
• /
• pp.259-266
• /
• 1995

In order to manufacture an attractive waste glass for the permanent and secure disposal of high-level radioactive waste, the complex composition of the simulated nuclear waste glass PNL-7668 was simplified to a composition of sodium borosilicate glass. The substitutions of $Fe_2O_3$ and $Al_2O_3$ were added to examine on the leaching characteristics of simulated nuclear waste glass with variable composition. The leach tests for these glasses were performed according to 'MCC-1, Static Leach Test Procedure' in acid and basic solution. In this study, for the $Al_2O_3$-containing glasses, Na ion release from these glasses was higher in acid solution than in basic solution. As the content of $Fe_2O_3$ was increased in glasses, Na ion release was increased in acid solution, in spite of decrease of amount of total mass diminution.