• 멤브레인
• /
• 제26권1호
• /
• pp.55-61
• /
• 2016

저압 침지식 멤브레인을 이용한 해수 담수화 전처리에 있어서 유기 파울링은 막간 압력 증가로 인한 화학 세정 횟수의 증가 및 에너지 소비 증가 등 멤브레인 운전시 문제점들을 야기한다. 조류대응 해수전처리에서 조류가 배출하는 extracellular polymeric substances의 대표물질인 sodium alginate를 이용하여 침지식 여과에서 파울링 현상을 관찰하였다. 공기 폭기가 적용되지 않은 경우 순수한 aglinate 파울링은 농도가 증가하면서 증가하였다. 그러나 공기 폭기를 적용해 준 경우 alginate 파울링 감소는 매우 효과적이었다. 공기 폭기가 없는 경우 칼슘 농도의 증가에 따라 alginate 파울링은 감소하였다. 동일 조건에서 공기 폭기 시 높은 alginate 파울링 감소효과를 나타내었으나 NaCl 농도를 증가시킨 경우 칼슘 농도의 증가에 따라 파울링 제어를 위한 공기 폭기 효과는 감소하였다. 해수와 유사한 높은 NaCl과 칼슘 농도에서 고농도 sodium alginate의 경우 공기 폭기량 증가를 통해 초기 파울링을 감소시킬 수 있었으나 시간의 경과에 따라 상대적으로 낮은 폭기량에서의 파울링 감소 효과와 큰 차이는 없었다.

• 폴리머
• /
• 제28권4호
• /
• pp.352-359
• /
• 2004

트립토판, 타이로신, 페닐알라닌과 같은 라세미 화합물의 광학 분할을 위해 광학 선택성 분리막을 이용한 막 분리법을 이용하였으며, 사용된 분리막 제조를 위해서 막 재료로 알진산나트륨 (sodium alginate)을, 가교제로 글루타르알데하이드 (glutaraldehyde)를 사용하였다. 제조된 막의 구조는 FT-IR을 이용하여 관찰하였고 라세미화합물의 광학 분할 메카니즘을 확인하기 위해서 모델링을 실시하였다. 막의 가교정도, 공급액의 농도, 조작압력, 그리고 공급액의 증류에 따른 막의 투과 특성을 알아보기 위해 여러 가지 변수를 통한 실험을 실시하였으며, 그 결과 막의 가교도와 두께가 증가할수록, 공급액의 농도와 용질의 크기가 감소할수록 즘 더 높은 광학 분할 능을 나타낸다는 것을 발견하였으며 이때의 enantiomeric excess (%ee) 값은 약 77%로 나타났다.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.55-60
• /
• 2004

In recent years, an increasing interest in membrane technology has been observed in chemical and environmental industry. Membrane technology has advantages of low cost, energy saving and environmental clean technology comparing to conventional separation processes. Pervaporation is one of new advanced membrane technology applied for separation of azeotropic mixtures, aqueous organic mixtures, organic solvent and petrochemical mixtures. Sodium alginate composite membranes were prepared for the enhancement of long-term stability of pervaporation performance of water-ethanol mixture using pervaporation. Sodium alginate membranes were crosslinked with CaCl$_2$ and coated with polyelectrolyte chitosan to protect washing out of calcium ions from the polymer. The surface structures of PAN and hydrolysed PAN membrane were confirmed by ATR Fourier transform infrared (FT-IR). A field emission scanning electron microscopy (FE-SEM; Jeol 6340F) operated at 15 kV. Concentration profiles for Ca in the membrane surface and membrane cross-section were taken by an energy dispersive X-ray (EDX) analyser (Jeol) attached to the field emission scanning electron microscopy (Jeol 6340F). Pervaporation experiments were done with several operation run times to investigate long-term stability of the membranes.

• 한국식품조리과학회지
• /
• 제27권5호
• /
• pp.497-505
• /
• 2011

The purpose of this study was to apply molecular gastronomy and spherification methodology to persimmon deserts. We prepared 'persimmon calcium alginate beads' and investigated their physical and sensory characteristics by adding different concentrations of sodium alginate (0.4, 0.6, 0.8, and 1.0%). Lightness and yellowness decreased significantly as the concentration of sodium alginate increased. However hardness, springiness, chewiness, cohesiveness, and resilience but not adhesiveness tended to increase as the concentration of sodium alginate increased. The thickness of the beads increased as the concentration of sodium alginate increased. In contrast, the thickness of the membrane decreased as the concentration of alginate increased from 0.8 to 1.0% suggesting that the amount of sodium alginate had reached a critical point. Quantitative descriptive analysis showed that voluminosity, springiness, hardness, chewiness, and residue tended to increase as the concentration of sodium alginate increased. Overall preference reached a peak at 0.4% sodium alginate.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 추계 총회 및 학술발표회
• /
• pp.72-75
• /
• 2003

• Journal of Pharmaceutical Investigation
• /
• 제27권2호
• /
• pp.133-137
• /
• 1997

Buccal absorption test of omeprazole in human was performed to determine the permeability of the drug molecule through oral mucous membrane. Oral mucosal adhesive tablets of omeprazole were prepared by compressing the omeprazole with a mixture of sodium alginate and hydroxypropylmethyl cellulose (HPMC) as bioadhesive polymers, magnesium oxide (MgO) as a stabilizer and sodium carboxymethyl cellulose (Na CMC) or cros-carmellose sodium (Ac-Di-Sol) as disintegrants. The bioadhesive force, stability in saliva and release characteristics of the tablets were evaluated. Omeprazole was absorbed about 23% in 15 min through human buccal mucous membrane. Furthermore, omeprazole was stable in saliva for more than 8 hrs when MgO was added to the tablet as the amount of 2.5 fold of omeprazole. The release rate of omeprazole was increased with increasing the amount of sodium alginate in the tablet. From these results, it is suggested that tablets composed of [omeprazole/HPMC/sodium alginate/MgO/Ac-Di-Sol and/or Na CMC (20/6/24/50/10) (mg/tablet)] are potential candidate for buccal drug delivery system.

• 폴리머
• /
• 제32권2호
• /
• pp.103-108
• /
• 2008

삼투정 펠렛은 경구를 통한 약물전달 시스템에 폭넓게 사용되고 있으며, 이러한 삼투정 펠렛은 수팽윤성 시드층과 모델약물인 니페디핀을 포함하는 약물층 그리고 약물의 방출을 조절하는 반투막 층으로 구성되어 있다. 이번 연구에서는 모델약물인 니페디핀을 포함한 삼투정 펠렛을 제조하고, 반투막층으로 사용되는 초산셀룰로오스(CA)와 Eudragit RS의 코팅두께에 따른 약물방출 거동과 알긴산 나트륨과 알긴산 나트륨의 가교가 삼투정 펠렛의 약물방출에 미치는 영향에 대하여 확인하고자 하였다. 모델약물인 니페디핀을 포함한 삼투정 펠렛의 제조는 유동층코팅기를 이용하여 제조하였으며, 비교적 높은 코팅 수율로 $1500{\sim}1700{\mu}m$ 내외의 펠렛이 제조됨을 SEM을 통하여 확인하였다. 이렇게 얻어진 펠렛의 반투막 층의 코팅두께에 따른 약물방출 거동을 보면 반투막의 코팅 두께가 증가할수록 약물의 방출이 지연됨을 확인하였다. 알긴산 나트륨을 반투막층 위에 코팅하였을 경우 인공위액(pH 1.2)에서는 약물방출이 거의 일어나지 않았으며, 인공장액(pH 6.8)으로 교체한 후 약물방출이 서서히 증가함을 알 수 있었다. 또한 알긴산 나트륨을 염화칼슘을 이용하여 가교시켰을 경우 약물의 방출이 급격히 감소함을 알 수 있었다. 이번 실험을 통하여 삼투정 펠렛의 약물방출은 반투막충의 코팅두께에 영향을 받으며, 알긴산 나트륨이 삼투정 펠렛의 약물방출에 영향을 끼침을 확인하였다.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.557-564
• /
• 2007

We prepared caviar analogs encapsulated by calcium-alginate gel membranes as a means to replace higher priced natural caviars. Processing the caviar analogs (beluga type) was optimized by response surface methodology with central composite design. Concentrations of sodium alginate ($X_1$) and $CaCl_2\;(X_2)$ were chosen as the independent variables. In order to compare characteristics of the caviar analogs with the natural caviar, sphericity ($Y_1$), diameter ($Y_2$), membrane thickness ($Y_3$), rupture strength ($Y_4$), rupturing deformation ($Y_5$), and sensory score ($Y_6$) were used as the dependent variables. The sphericity of the caviar analogs showed a similar value to that of natural caviar (over 94%) in the range of independent variables. Generally, the $CaCl_2$ concentration ($X_2$) affected all dependent variables to a greater extent than the sodium alginate concentration ($X_l$), For the multiple response optimization of the 5 dependent variables ($Y_1,\;Y_2,\;Y_4,\;Y_5$, and $Y_6$), the desirability function was defined as the following conditions: target values ($Y_1\;=\;100%,\;Y_2\;=\;3.0\;mm,\;Y_4\;=\;1,470\;g,\;Y_5\;=\;1.1\;mm,\;and\;Y_6\;=\;10\;points$). Membrane thickness ($Y_3$) was eliminated from the dependent variables for multiple response optimization because it could not be measured with an image analyzer. The values of the independent variables as evaluated by multiple response optimization were $X_1\;=\;-0.093$ (78%) and $X_2\;=\;-0.322$ (1.07%), respectively.

• Korean Membrane Journal
• /
• 제10권1호
• /
• pp.39-45
• /
• 2008

Polyelectrolyte complex based on two anionic polysaccharides, composed of sodium alginate and carrageenan, were prepared by interacting with divalent calcium ions in solution. The effects of annealing on the structural deformation of polyelectrolyte complex and on their characteristics at removing water from a methanol mixture from the point of molecular sieve were investigated and discussed. The result showed that the structural deformation of the annealed polyelectrolyte complex has an effect on the free volume between these polymer chains and the chelate segments such a shrinking of the overall morphology, which act as a molecular sieve in the separation of methanol and water mixtures.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.483-498
• /
• 2017

Novel mixed matrix membranes of Sodium Alginate (NaAlg) were developed by the incorporation ofunmodified, modified Phosphomolybdic acid (PMA) then cross-linked with glutaraldehyde externally. These membranes were prepared by the solution casting technique. Pervaporation (PV) experiments have been performed with pure NaAlg, unmodified NaAlg-PMA5, NaAlg-PMA10, modified NaAlg-mPMA5, and NaAlg-mPMA10 (wt. % of PMA 5 and 10) at 30, 40 and $50^{\circ}C$, to separate water-isopropanol feed mixtures containing 10-30 wt. % of water. Pervaporation results of NaAlg-mPMA10 produced a highest separation factor of 9028 with a flux of $0.269kg/m^2.h$ for 10 wt. % of water containing feed mixture. Both separation factor and flux for water increased significantly with increasing content of mPMA into NaAlg; a significant improvement in PV performance was observed for NaAlg-mPMA5 and NaAlg-mPMA10 membranes when compared to pure NaAlg& PMA-5, PMA-10 membrane.