• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.1
• /
• pp.31-38
• /
• 1997

Changes in bile acid binding rapacity in vitro and physical properties of alginate extracted from sea tangle (Laminaria spp.) and residue after extracting alginate (RAEA) were investigated. For the purpose, extraction conditions controlled under 1, 3 and $5\%$ of sodium carbonate solution, and 1, 3, 5 and 10 hours of extraction time at $60^{\circ}C$. The less sea tangle had particle size and the higher concentration of sodium carbonate solution increseded, the more yield of alginate gained. High concentration of sodium carbonate solution and long extraction time resulted in weakly binding capacity in vitro by alginate. Among four bile acids, binding capacites with alginate were in the order of cholic, taurocholic acid>glycocholic acid>deoxycholic acid. The binding capacity of RAEA was rated at almost same degree of alginate. For increasing the binding capacity of bile acids by alginate, it was subject to high viscosity and degree of polymerization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.3
• /
• pp.255-262
• /
• 1992

In vitro digestibility of filefish, protein was substantially decreased by fiber constituents in the follow-ing order : pectin (9.97%), gum karaya (7.03%), sodium alginate (6.12%),and cellulose (1.52%). The order of reduction by fibrous residues from vegetables ranked as follows : sea tangle (12.36%), Ro-maine lettuce (11.12%), perillar leaf (8.96%), and green pepper (5.15%). The inhibitory effect of the dietary fibers towards filefish protein digestion, expressed as soybean trypsin inhibitor equivalents, in-creased with added levels, but the inhibition differed with the sources of dietary fibers. Sea tangle and sodium alginate were most active in decreasing the concentration of essential amino acid from filefish protein hydrolysis. Sodium alginate exerted an inhibitory effect on the activity of trypsin, but the other fiber constituents did not have an inhibitory potency on trypsin and bacterial pretense (Streptomyces griceus). Results supported that dietary fiber components may reduce protein digestibility through the interaction of dietary fiber components with filefish protein.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.4
• /
• pp.586-591
• /
• 2000

This study was conducted to investigate the effect on quality of low fat pork patties containing various hydrocoloids such as sodium alginate, carboxymethy1 cellulose (CMC) and zanthan gum. Moisture contents of raw, cooked and reheated patties of control patty (20% fat) were lower than those of the hydrocolloids-added patties, and fat content patties was higher than other patties. Colors of raw and reheated patties were not different among four kinds of patties, but L-value of cooked patty adding sodium alginate and b-value of control patty were low significantly in comparison with other patties. Cooking and final yield of hydrocolloids-added patties was high significantly in comparison with control patty. Fat retention of cooked control patty was lower than hydrocolloids-added patties, and fat retentions of retention four kinds of patties were 89.7~93.1%. Hardness of cooked and reheated patties adding xanthan gum was low significantly in comparison with other patties, and chewiness was high in theorder of control patty, CMC, sodium alginate and xanthan gum. In case of water holding capacity, cooked and reheated hydrocolloids-added patties, and juiciness was superior in the order of xanthan gum, sodium alginate, CMC and control patty. On the whole, textural and sensory characteristics of patties containing hydrocolloids were superior to control patty.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.247.1-247.1
• /
• 2003

Iron deficiency is the most common nutritional problem worldwide. Oral iron supplementation programs have failed because of noncompliance and gastrointestinal toxicity. The purpose of this study was to explore the possibility of alginate gel bead as an oral controlled release system of iron supplements and increase the stability of iron succinyl casein (ISC). Alginate beads containing ISC were prepared by the gelation of sodium alginate with calcium cations. The release profiles of ISC were investigated according to the concentration of polymer, the drug/sodium alginate ratio, the concentration and type of cation, curing time and pH of calcium chloride solution. (omitted)

• KSBB Journal
• /
• v.14 no.4
• /
• pp.389-395
• /
• 1999

Bifidobcterium spp. can provide human being with several beneficial physiological. Therefor, there has been a considerable interest in products Bifidobcterium spp. dietary supplements or as starter cultures for probiotic products that may assint in the improvement of health on the human. But indusrial applications have been limited because Bifidobcterium spp. are sensitive to acidic pH due to organic acid produced by themselves and various conditions. The objective of this study was to establish new method for improvement of Bifidobcterium viability by entrapment im calcium alginate beads. We have a plan to select the most suitable polymer through the comparison with acid tolerance oxygen tolerance and theological properties of polymer. Increase of the viable number of Bifidobcterium induced increasing acid tolerance and oxygen tolernce trough the development of entrapment technique. The 4%, 3030mm diameter) sodium alginate beads led to the best survivability under acid condition. Especially, addition of 6% mannitol, 6% glycerol or 6% sorbitol to the sodium alginate helped a beneficial effect on viability against acid, bile salt, hydrogen peroxide and cold strage. The number of viability of entrapeede cells by retreatment was 96 fold higher than non-entrapeed cells after 5 hours of storage under pH 3 acidic condition. These experimental data clearly demonstrate that a whole cell immobilization by entrapment in calcium alginate beads is an important survival mechanism enable to withstand environmental stresses as the acidic condition, hydrogen peroxide toxicity and frozen state.

• Korean Membrane Journal
• /
• v.6 no.1
• /
• pp.55-60
• /
• 2004

In recent years, an increasing interest in membrane technology has been observed in chemical and environmental industry. Membrane technology has advantages of low cost, energy saving and environmental clean technology comparing to conventional separation processes. Pervaporation is one of new advanced membrane technology applied for separation of azeotropic mixtures, aqueous organic mixtures, organic solvent and petrochemical mixtures. Sodium alginate composite membranes were prepared for the enhancement of long-term stability of pervaporation performance of water-ethanol mixture using pervaporation. Sodium alginate membranes were crosslinked with CaCl$_2$ and coated with polyelectrolyte chitosan to protect washing out of calcium ions from the polymer. The surface structures of PAN and hydrolysed PAN membrane were confirmed by ATR Fourier transform infrared (FT-IR). A field emission scanning electron microscopy (FE-SEM; Jeol 6340F) operated at 15 kV. Concentration profiles for Ca in the membrane surface and membrane cross-section were taken by an energy dispersive X-ray (EDX) analyser (Jeol) attached to the field emission scanning electron microscopy (Jeol 6340F). Pervaporation experiments were done with several operation run times to investigate long-term stability of the membranes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.1
• /
• pp.20-25
• /
• 2016

This study elucidated the effects of physicochemical factors on the production of cooked rice analogs using calcium alginate gels. Cooked rice analogs were prepared using various sodium alginate concentrations, agitation speeds, dropping distances, coating times, curing times and heating times. The diameter ratio and rupture strength of authentic cooked rice were 0.38 and 268.4 kPa, respectively. The diameter ratio of the analogs prepared with 0.7% (w/v) sodium alginate was 0.39, which was the closest to that of authentic cooked rice. When sodium alginate solution (0.7%, w/v) was dropped into calcium chloride solution (2%, w/v) via a nozzle, the diameter ratio of the analogs at an agitation speed of 520 rpm was 0.39. The optimal dropping distance was 8 cm and the optimal coating and curing times were each 20 min. The analogs were coated with β-cyclodextrin to improve their physical properties. The diameter ratio of the coated analogs was little changed; however, the rupture strength decreased slightly after heating for 60 min at 95°C.

• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.109-117
• /
• 1993

To investigate the effects of sodium alginate, gum karaya and gum arabic on the foaming properties of sodium caseinate, surface tension, specific viscosity, turbidity, foaming ability and foam stability of the caseinate solution with added gums were examined. Surface tensions of the 5%(w/v) protein solutions containing gums at pH 7.0 and 8.0 were $43.7{\sim}44.7dyne/cm$ and $43.6{\sim}44.0 dyne/cm$, respectively. Specific viscosities of the solutions with 0.2 and 0.3% sodium alginates were 15.6 and 39.1 at pH 7.0 (control, 2.8), and 12.1 and 8.2 at pH 8.0 (control, 2.6), respectively. Turbidities were $69.5{\sim}74.0$ at pH 7.0 and $68.0{\sim}72.5$ at pH 8.0. The optimum conditions for foaming ability of the solutions were 0.1% conc. and 15 min whipping in addition of sodium alginates; 0.2% conc. and 20 min whipping in gum karaya; 0.1% conc. and 10 min whipping in gum arabic. For foam stability optimal concentrations were 0.3% in sodium alginate and gum karaya at pH 7.0 and 0.2% at pH 8.0. Addition of sodium alginates was most effective to increase foam stability of the solution, but was not effective to increase foaming ability. At same pH, surface tensions and turbidity of the solutions were related to foaming ability and specific viscosities were related to foam stability.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.121-127
• /
• 2003

The objective of this study was to solidify the simvastatin self-microemulsifying drug delivery system (SMEDDS) and to improve the encapsulation efficiency of solidified alginate beads using sodium alginate. Typical simvastatin SMEDDS was composed of various oils, surfactants and cosurfactants. Also solidified-alginate beads was prepared by crosslinking liquid emulsion mixtures containing sodium alginate and other excipients (cetylpyridinum chloride (CP-Cl), hydroxypropyl methylcellulose, starch and so on). in $CaCl_2$ solution, it has been investigated that the drug release pattern and encapsulation efficiency were varied with the ratio of cationic lipid (CP-Cl). Solidified sodium alginate beads containing simvastatin SMEDDS were redispersed into media without re-aggregation. Oil droplet size of redispersed solidified-beads in media produced smaller than the initial size. The density of beads and drug loading amount were increased with increasing cationic lipid content. These systems have advantages of storage stability and predictability of drug release rate.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.206-212
• /
• 2008

Alginate obtained from marine brown algae, is a copolymer with repeating units of $\alpha$-($1{\rightarrow}4$)-L-guluronic acid(G) and $\beta$-($1{\rightarrow}4$)-D-mannuronic acid(M). It has good properties such as biocompatibility, non-toxicity. and hydrophilicity. However, alginate alone cannot be electrospun due to high viscosity and conductivity. To solve this problem. electro spinning of sodium alginate(SA) was performed by blending with poly(ethylene oxide)(PEO) and poly(vinyl alcohol)(PVA) in this study. Characteristics of SA/PEO nanofibers and SA/PVA nanofibers were estimated by SEM and XRD analyses. Optimal nanofiber webs are obtained from 2/2 wt% of SA/PEO and 2/7 wt% of SA/PVA. SA/PEO and SA/PVA nanofiber webs may have potentials for tissue engineering scaffold and wound dressing.