• Journal of Pharmaceutical Investigation
• /
• v.32 no.1
• /
• pp.7-11
• /
• 2002

The purpose of this study was to develop a new $^{l3}C-urea-containing$ capsule for diagnosis of H. pylori. The urea-containing capsules were prepared with various diluents such as polyethylene glycol (PEG), microcrystalline cellulose, sodium lauryl sulfate and citric acid. The dissolution test, $^{l3}C-urea$ breath test and stability test were then performed on the capsules. Microcrystalline cellulose and sodium lauryl sulfate retarded the initial dissolution rates of urea. However, PEG increased the initial dissolution rates of urea. Furthermore, two formulae composed of PEG, [$^{l3}C-urea/PEG$ (38/1.9 mg/cap)] and [$^{l3}C-urea/PEG/citric$ acid (38/1.9/1.9 mg/cap)] had the maximum DOB value, about 16 at 20 mim, while the formula composed of only 38 mg $^{l3}C-urea$ had the maximum DOB value at 30 min. The results indicated that PEG improved the, sensitivity of $^{l3}C-urea$ in the human volunteers. The capsule [$^{l3}C-urea/PEG$ (38/1.9 mg/cap)] was stable for at least six months in 25 and $37^{\circ}C$. Thus, a PEG-containing capsule, [$^{l3}C-urea/PEG$ (38/1.9 mg/cap)] would be a more economical, sensitive and stable preparation for diagnosis of H. pylori.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.305-312
• /
• 2019

This study was conducted to effect the cell activity and cytotoxicity of dentifrice. For the study, 6 kinds of general dentifrice, 3 kind of whitening dentifrice, 2 kinds of natural dentifrice and SLS(sodium lauryl sulfate) of positive control group. Immortalized human gingiva fibroblast cell was used for the study, WST test for cell activity and Agar diffusion test for cytotoxicity. Agar diffusion test showed high cytotoxicity in general dentifrice test group and whitening dentifrice test group, but low cytotoxicity in natural dentifrice test group. As a result of cell nucleus staining, cell shape and nuclear activity showed that the highest activity in natural dentifrice group, followed by whitening dentifrice group and general dentifrice group. As a result of this study, the cytotoxicity of different ingredient and according to the use to dentifrice. As a result of this study, we confirm cytotoxicity of kind and components according to the purpose of using dentifrice. Therefore, it is necessary to indicate the detailed ingredients of dentifrice for the smart choice of consumers.

• Korean Journal of Food Science and Technology
• /
• v.11 no.2
• /
• pp.112-117
• /
• 1979

By using the existing caustic refining system with a minimum modification and by using a combination of various emulsifiers(0.2 % sodium hexametaphosphate. 0.05 % sodium lauryl sulfate and 0.001 % dioctyl sodium sulfosuccinate), a new economical dewaxing process for sunflower seed oil was developed in order to reduce the cost of the dewaxing process. The results indicate that the waxes can be removed satisfactorily from the sunflower seed oil by emulsifying. batchwise or continuously, the oil with the aqueous surfactant solution, followed by centrifugation at ambient temperatures $(16{\sim}27^{\circ}C)$. Dewaxing loss for the batch process was satisfactory for both low wax-and high wax-crude oil, whereas dewaxing loss for the continuous process needs to be improved. The results indicate that initial level of wax content (low wax vs. high wax) did not affect the loss for batch process (0.82 % vs. 0.62 %), but affected the loss for continuous processes, regardless of the type of mixing mode (2.28 % and 5.68 % for low wax-and high wax-oil, respectively). It was also noted that the type of mixing mode (centactor vs. static mixer) for the continuous process affected the loss, regardless of the wax content (5.2 % and 2.8 % for contactor and static mixer, respectively).

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.75-79
• /
• 2022

Fresh, washed ginseng can be contaminated with microorganism loads as high as 6.5 log CFU/g for total bacteria and 4.3 log CFU/g for mold. The goal of this study was to test eight antibacterial agents on ginseng. Immersing fresh ginseng washed in 1% (w/w) sodium citrate, sodium diacetate, sodium acetate, citric acid, and sodium lactate solution for 1 h resulted in a bactericidal effect of 31.0-97.5% for total bacteria. Among the organic acids, sodium citrate had the best antibacterial effect, with total bacteria reduced from 6.5 log to 4.9 log CFU/g. A 1% (w/w) vitamin B₁ lauryl sulfate solution with surfactant function by hydrophilic and hydrophobic sites can reduce 2.7 log CFU/g (99.8% inactivation) on total bacteria. In the 1% (w/w) calcium oxide solution, total bacteria were reduced by 3 log, showing an excellent inactivation effect of 99.9%. Calcium oxide is a highly useful material for inactivation of microorganisms in fresh ginseng.

• Journal of Environmental Science International
• /
• v.5 no.3
• /
• pp.369-376
• /
• 1996

The adsorption of the anionic surfactants, sodium lauryl sulfate (SLS) and sodium dodecylbenzene sulfonate (SDBS) anion surfactants form aqueous solutions with nonionic resins, Amberlite XAD-2, XAD-4 and XAD-7 at temperatures in 15~45$^{\circ}C$ range was studied. Several adsorption isotherm models were used to fit the experimental data, The best results were obtained with the Redlich-Peterson equation and the Freundlich model provided remarkably good fits. For a particular resin at a particular temperature, SDBS was more extensively adsorbed than SLS. The highest adsorption were obtained with XAD-4 resin and the specific surface area of the resins plays a major role in adsorption of the surfactants. Estimations of the isosteric heat of adsorption were indicative of an exothermic process, and their magnitudes manifested a physisorption process.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.4
• /
• pp.332-338
• /
• 2005

This study was conducted to prepare acrylic removable protective coatings by emulsion polymerization. Monomers used were n-butyl acrylate, acrylonitrile, butyl methacrylate. Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was 200 rpm. Tensile strength, extension, peel strength, viscosity, and solid contents of the synthesized coatings were examined. The coatings prepared with BA:AN = 60:20 (in weight ratio) satisfied the standard for automobile in terms of extension and peel strength. When the concentration of BMA was in a range of $18{\sim}23$ wt%, the prepared coatings satisfied the standard for automobile in terms of peel strength and water resistance.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.271-277
• /
• 1997

Because omeprazole(OMP) is very unstable in aqueous condition, $OMP-{\beta}-CD$, the inclusion complex of OMP and ${\beta}-cyclodextrin({\beta}-CD)$ was made and physicochemical properties of it were compared with those of OMP. Skin permeability of OMP and $OMP-{\beta}-CD$ in propylene glycol vehicle and the reciprocal action of ${\beta}-CD$ with various enhancers were examined through hairless mouse. Adhesive patches were prepared with polyisobutylene and the skin permeability and stability of OMP were investigated. The inclusion complex showed higher solubility and lower partition coefficient than OMP itself. DMSO, 1-methyl 2-pyrrolidone and sodium cholate had an enhancing effect. However ethanol and polysorbate 80 hardly showed the enhancing effect of OMP. When sodium lauryl sulfate and sodium cholate as enhancer were added in patch, the former case showed higher permeability of OMP.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.789-794
• /
• 2012

For the purpose of development of the latex suitable for polymer cement mortar, experiments on the preparation of carboxylated styrene butadiene latex by the method of the two-step emulsion polymerization were performed. Methyl methacrylate, methacrylic acid and acrylic acid were selected as carboxylic co-monomer, styrene and butadiene as monomer, sodium dodecylbenzene sulfonate and sodium salt of lauryl sulfonate as anionic emulsifiers, and nonylphenoxy poly (ethyleneoxy) ethanol (n=10, 20, 40) as latex stabilizer. Potassium persulfate and sodium bisulfite were also used as redox initiator, and sodium monohydrogen phosphate and potassium carbonate as electrolytes. The effects of categories and concentration of carboxylic co-monomer, molecular weight control agent, crosslinking agent, and styrene/butadiene monomer ratio on the characteristics of latex were investigated. Polymerization recipes for preparation of polymer cement mortar could be proposed. The prepared latexes were tested for the physical properties such as compressive and flexural strength when latexes were mixed with cement mortar. The results showed that the latex could be adapted to polymer cement mortar. Also, it was recognized that the compressive and flexural strength were exhibited 25.4% and 45.3% respectively higher improvement than the quality standards at 28 days curing time.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.11-16
• /
• 1998

Simulated waste liquid containing 50 ppm cobalt ion was t$\xi$sted by precipitate flotation using a sodium lauryl sulfate as a c collector. The effects of initial cobalt ion concentration, pH, surfactant concentration, flotation time, gas flow rate and foreign i ions on removal efficiency of cobalt ion were studied. Pretreatment of the waste liquid with 35% $H_2O_2$, prior to precipitate f flotation made shin of optimal flotation pH from the strong alkalinity to weak alkaline range and made a favorable flotation of c cobalt ion in wide range of pH. For the result of this experiment, 99.8% removal efficiency was obtained on the conditions of initial coball ion concentration 50 ppm, pH 9.5 gas flow rate 70 mllmin, flotation time 30 min. The simulate ion was fanned t to be the most harmful ion against removal of cobalt by precipitate flotation of the species which were tested The presence of 0.1 M of $SO_4^{2-}$ ion decreased remo,때 $\xi$폐iciency of cobalt to 90% while the cobalt were almost entirely removed in the a absence of sulfate ion.