• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.237-245
• /
• 2011

Purpose: The present study was conducted to investigate whether certain repeated physical and/or chemical stimuli added on ophthalmic lenses might induce any changes of the functions of lens coatings. Methods: The changes in lens surface, light transmittance, foggy duration, durability of ophthalmic lenses were determined after the application of tearing-off with tape, rubbing with acetone, soaking in acetone or distilled water of ophthalmic lens (CR-39 material) as physical and/or chemical stimuli. Results: The change of ophthalmic lens surface was detected after soaking in acetone for longer than 30 minutes by observing the lens surface to figure out the functional change of hard coating. The ophthalmic lens soaked in distilled water for 180 minutes showed little functional change of anti-reflection coating as 1% by measuring light transmittance of lens. However, the function of anti-reflection coating was almost disappeared after the ophthalmic lens was soaked in acetone for 60 minutes. The foggy duration of ophthalmic lens soaked in acetone was increased by estimating foggy duration of lens. The lens coating was shown to be defected when the pre-damaged ophthalmic lenses were torn off with tape, rubbed with acetone and soaked in distilled water or acetone by observing pre-damaged lens surface to evaluate its durability. Conclusions: The careful management during ophthalmic lens dispensing or usual eyeglass wearing is needed since the change in ophthalmic lens coatings was shown by repeated physical and/or chemical stimuli.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.2
• /
• pp.156-160
• /
• 2004

This study was carried out to examine the changes of chlorophyll a and b contents by the extraction temperatures and the number of soaking using five kinds of Korean green teas(3 kinds of green tea and 2 kinds of tea bag) which were obtained from a local market in Daegu city, Korea. The chlorophylls were extracted with 80% acetone, and determined by a visible spectrophotometer. The concentration of chlorophyll in Sulrok(tea bag) were the highest among all kinds of teas when they were extracted at 60, and decreased with the number of soaking increased. On the other hand, the chlorophyll content of green teas was the highest at 80, and decreased with the increase of the number of soaking as the tea bag did. It was found that the Korean tea bag contained more chlorophyll than green teas did, and green teas contained significantly more chlorophyll b than chlorophyll a.

• Applied Biological Chemistry
• /
• v.45 no.2
• /
• pp.59-65
• /
• 2002

Different amounts of the Opuntia ficus-indica var. saboten fruit were soaked in different alcohol concentrations of a Korean rice wine distillate for 4 months. Changes in pH, brix degree, contents of reducing sugar and polyphenol compound, alcohol concentration, turbidity, and color were analyzed during the soaking period. Quality of the final product was determined through the analysis of the volatile flavor compounds and sensory evaluation. During the soaking periods, pH, alcohol concentration, and contents of polyphenol compound decreased, whereas the content of reducing sugar increased. These changes were affected more by the content of the fruit than the alcohol concentration of the soaking media. Turbidity of the wine increased with higher fruit contents, while the increase of alcohol concentration resulted in the turbidity decrease. As the soaking period increased, lightness and yellowness increased but redness decreased. Acetaldehyde, acetyl acetone, ethyl alcohol, guaiacol, thymol, and acetic acid phenyl ester were detected in all liquors. Significant differences in all sensory attributes test were shown by six experimental groups (p<0.05), and the best overall acceptability was obtained from the liquor made of 67% fruits and 30% alcohol concentration.

• Journal of Hydrogen and New Energy
• /
• v.24 no.1
• /
• pp.44-49
• /
• 2013

Hydrogen penetration into a metal leads to damages and mechanical degradations and its content measurement is of importance. For a precise measurement, a sample preparation procedure must be optimized through a series of studies on sample washing and drying. In this study, two-step washing with organic solvents and thermal soaking in inert gas were tried with a rod-shaped, API X65 steel sample. The samples were machined from a steel plate and then washed in acetone and etyl-alcohol for 5 minute each and dried with compressed air. After then, the samples were thermally soaked in a home-made nitrogen gas chamber during 10 minute at different heat gun temperatures from 100 to $400^{\circ}C$ and corresponding temperature range in the soaking chamber was from 77 to $266^{\circ}C$ according to the temperature calibration. Hydrogen residue in the samples was measured with a hot extraction system after each soaking step; hydrogen residue of $0.70{\pm}0.12$ wppm after the thermal soaking at $77^{\circ}C$ decayed with increase of the soaking temperature. By adopting the heat transfer model, decay behavior of the hydrogen residue was fitted into an exponential decay function of the soaking temperature. Saturated value or lower bound of the hydrogen residue was 0.36 wppm and chamber temperature required to lower the hydrogen residue about 95% of the lower bound was $360^{\circ}C$. Furthermore, a thermal desorption spectroscopy was done for the fully soaked samples at $360^{\circ}C$. Weak hydrogen peak was observed for whole temperature range and it means that hydrogen-related contaminants of the sample surface are steadily removed by heating. In addition, a broad peak found around $400^{\circ}C$ means that parts of the hydrogen residue are irreversibly trapped in the steel microstructure.

• Korean Journal of Weed Science
• /
• v.16 no.1
• /
• pp.8-13
• /
• 1996

This study was conducted to know the effect of storage period, harvesting time and light condition on dormancy breaking of major weeds. Echinochloa crus-galli, Cyperus serotinus, Aeschynomene indica, Ludwigia prostrata and Bidens tripartita had the 10 or 30% germination ability within 30 days after harvest but scirpus juncoides, Potamogeton distinctus, Aneilema japonica and Monochoria vaginalis had not germination untill 120 days after harvest of seed. C. serotinus and P. hydropiper required strong light for germination but S. juncoides, L. prostrata and B. tripartita showed the less tham 5% germination in the dark condition gerntinator. S. juncoides germination showed negative response in chemical soaking but A. japonica, B. tripartita and L. prostrata showed high germination percentage in Acetone, Chloroform and distilled water soaking during the 10 days after treatment.

• 보존과학연구
• /
• s.32
• /
• pp.61-74
• /
• 2011

This study examines the removal effects of solvents which were applied on three adhesives and three filling materials for ceramics. The chosen materials are Cemedine C, Loctite$^{(R)}$ 401$^{TM}$, Araldite Rapid Type, plaster of paris, CDKI 520A+B, Araldit$^{(R)}$ SV427-2+HV427-1. For the first examination, each different materials were soaked into different solvents, and then the soften level were compared by compressive pressure. The result of the first exam showed that Cemedine C was dissolved easily in acetone. Furthermore Araldite, CDK and SV427 were soften efficiently by Dichloromethan, Tetrahydrofuran and DMX(Dichloromethan+Methanol+Xylene). However, Loctite and plaster were not able to make sample for the first test. Therefore, the second test carried on only. The second examination, chosen effective solvents from the first test were applied with two different methods; soaking and saturated atmosphere. Almost every sample could removed by soaking method in ten minutes, and saturated atmosphere method needs 24 hours for the safety.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.147-152
• /
• 2010

Poor fruit set during winter period is one of the biggest problem in plastic tunnel watermelon cultivation. Hand pollination is inevitable to maximize fruit set of the winter watermelon. Productivity and viability of pollen grain and organic solvents for pollen storage were investigated. All cultivars produced more than 10 mg/flower except for 'Kumchun' cultivar. Pollen amount per flower were 13.8 mg in 'Bok' and 12.1 mg in 'Speedkul'. Germination rate of pollen grains incubated at $30^{\circ}C$ right after soaking in pentane solvent were 76% in 'Kumchun' as the lowest and 92% in 'Apollokul' as the highest. The pollen of 'Bok' showed the highest germination rate by 75% after a 15-day storage in pentane. All cultivars showed their pollen germination rate below 25% after a 24-day storage. Among the cuitivars, speed of pollen tube growth in vitro were relatively lower in 'Kumchun' and 'Sambokkul' by below $50\;{\mu}m/hr$. Pollen tube of these cultivars tended to burst during its elongation on the medium. Pollen stored 24 hrs in organic solvents showed 45, 39, 34, 23, and 19% of germination in pentane, ethyl ether, n-hexane, ethyl acetate, and acetone, respectively. Compared with light condition, pollen viability was higher in darkness during pollen storage in organic solvents. Pollen grain was susceptible to the organic solvent. The viability of pollen grains seems to be influenced greatly by duration of soaking pollen in organic solvent and the polarity of solvents. Organic solvent damages surface of pollen grain and extent of damage was varied by the solvents.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1653-1661
• /
• 2007

The research aimed to establish the standard extraction procedure for examining brazilin, the major chromophoric substance of Sappanwood, using GC-MS with the ultimate goal of identifying the sappanwood dye in severely faded archaeological textiles. The amount of brazilin represented by the GC abundance was the largest when acetone was used as the extraction medium, followed by methanol. Shaking plate operated at room temperature was more effective than the waterbath shaker which was operated at $30^{\circ}C$. In both cases, the extraction method which incorporated one hour pre-soaking before the 12 hours of actual extraction resulted in a larger amount of brazilin detection than the extraction procedure without the one hour pre-soaking. In case of water extraction, pH 5 resulted in the most effective pH level for the extraction of brazilin, The best GC-MS parameter for detecting brazilin was to set the column temperature initially at $50^{\circ}C$. gradually increase to $210^{\circ}C$ at a $23^{\circ}C/min$ rate, finally increase to $305^{\circ}C$ at $30^{\circ}C/min$ rate, and hold for 14 minutes, and the MSD scan range at $75{\sim}400m/z$.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.223-229
• /
• 1997

This study was undertaken in order to elucidate the elimination of fenitrothion residues during the dietary fiber and bioflavonoid preparations from mandarin orange peels. Dietary fibers were prepared from contaminated mandarin orange peels through homogenization, enzyme treatment, ethanol precipitation, acetone washing and air drying, at the yields of 17.4% total dietary fiber, 13.1% insoluble dietary fiber and 1.7% soluble dietary fiber. The removal rate of fenitrothion residues at 13 and 0.5 ppm levels in orange peels was 98.4% and 91.9% in total dietary fiber, 99.7% and 97.1% in insoluble dietary fiber, 100% and 99.6% in soluble dietary fiber, respectively. When bioflavonoid was prepared from contaminated mandarin orange peels through homogenization, soaking, ethanol precipitation, hexane and butanol extractions, the removal rate of fenitrothion residues was 92.7% in intermediate extract and 100% in final extract.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.237-242
• /
• 1998

This study was carried out to process canned ark shell with highly quality by management of proper processing conditions for prevention of oxidation and discoloration by heating. Ark shell has hemoglobin as blood pigment in red blood shell which same as other cockles. Hemoglobin is easy to come oxidation and browning reaction, and it has large contents of carotenoid as meat pigment. Proximate compositions in ark shell were 76.9% of moisture, 18.1% of crude protein, 1.8% of crude lipid, 1.3% of carbohydrate and 1.6% of crude ash. And contents of carotenoid and hemoglobin were 0.67~1.02mg% and 0.98~1.64g/dl, respectively. When the living ark shell was soaked in 2% NaCl solutions, about 89% of mud was removed after 10 hours soaking, and over 91% was removed when the pH was adjusted to 7.5. Carotenoid pigment were prepared that extracted from ark shell by using acetone. And determined visible spectrum were two peak at 452nm and 687nm, and λmax were 452nm. During thermal treatment at 95$^{\circ}C$, 111$^{\circ}C$, 116$^{\circ}C$ and 121$^{\circ}C$ for 60 minutes, retention ratio of carotenoid were 71.8%, 66.8%, 64.4% and 36.5%, and after 120 minutes retention ratio were 56.6%, 30.6%, 30.3% and 17.2%, respectively. When heated at 95$^{\circ}C$, 111$^{\circ}C$, 116$^{\circ}C$ and 121$^{\circ}C$, formation of browning material were increased at high temperature and long time treatment.