• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.134-138
• /
• 2000

Most parts of alfalfa plant have been reported to contain autotoxic substances that inhibit seed germination and early seedling growth, however, the chemical(s) is not still studied much. Effect of seed leachates of 'Vernal' alfalfa (Medicago sativa L.) was evaluated for inhibition of alfalfa germination and root growth through bioassay. Alfalfa seeds were extracted in 1 L deionized water for 1 h after soaking and the leachates caused to reduce root length of alfalfa significantly as the soaking time increased. Crude seeds at 4 g L$L^{-1}$ exudated autotoxins that reduce significantly root length by 34 % compared to the control, when the seeds soaked in deionized water for 24 h. However, the extracts did not affect final germination as well as speed of germination. Extracts from ground seeds significantly reduced speed of germination (GT 50) and root length. The results indicate that release of autotoxic substances from seeds during seed imbibition was increased with increase of soaking time and seed amount, and that autotoxicity was more occurred in ground seeds than in crude seeds.

• Journal of the Optical Society of Korea
• /
• v.7 no.2
• /
• pp.47-52
• /
• 2003

Effect of soaking temperature on erbium doping of the optical fiber core during solution doping procedure, especially in the modified chemical vapor deposition (MCVD) process, was investigated. The concentration of dopants such as $Er^{3+} and Al^{3+}$ in the preforms and the optical fibers measured by the electron probe microanalysis (EPMA) and the optical spectrum analyzer (OSA) was found to increase with decreasing the soaking temperature. The increase in the concentration of the $Er^{3+}$ is attributed to the precipitation of the erbium due to the decrease in the solubility as well as the increase of capillary force and viscosity of the doping solution by decreasing the temperature.

• Applied Biological Chemistry
• /
• v.31 no.1
• /
• pp.46-51
• /
• 1988

The effects of temperature on the water uptake rate of soybeans soaked in tap water and 0.5% $NaHCO_3$ solution were studied. The higher the soaking temperature, the faster the hydration rate, and among the three soybean varieties (Tanyob, Kwanggyo and Saeal), Tanyob(the smallest variety) showed faster rate than ocher varieties when soaking in tap water and 0.5% $NaHCO_3$ solution. Activation energy due to weight increase was calculated using Arrhenius equation. z-Values calculated from weight changes to reach different degrees of hydration during soaking showed the tendency to decrease with the increase of hydration degree when soaking in tap water and 0.5% $NaHCO_3$ solution.

• Journal of the East Asian Society of Dietary Life
• /
• v.5 no.2
• /
• pp.49-62
• /
• 1995

This study was investigated to find effects of soaking-water salt concentration and submaterial on Kimchi taste and fermentation period. several parameters such as pH, acidity, reducing sugar, amino acid and sensory evaluation during fermentation at 2$0^{\circ}C$ were experimented. The results are as follows : As fermentation period increases, pH and content of reducing sugar of Kimchi have decreased. But acidity has increased. Especially, the pH of all samples rapidly decreased to a extent of pH 4.2. During fermentation the acidity and content of reducing sugar in 12% soaking-water were higher than those in 16% and 20%. Content of reducing sugar I Kimchi was observed to play an important role for the overall taste. As a result of sensory evaluation during fermentation, Kimchi in 16%, 2.6% and in 20%, 3.7%. Sensory evaluation revealed that leek-added Kimchi was highly evaluated in crispness, sour taste, flavor and overall acceptability. These results suggested that Kimchi fermented for 4days at 2$0^{\circ}C$ with 16% salt concentration of soaking water and leek as submaterials should taste most desirable.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.5
• /
• pp.504-510
• /
• 2019

The purpose of this study was to compare the effects of soaking and ultrasonic extraction by observing the change of contents with extraction time of physicochemical properties (solid content, colorness, caffeine, chlorogenic acid, total polyphenols, DPPH, and ABTS). As a result of the analysis, solid content increased with longer extraction time and the whiteness tended to decrease with longer extraction time. Conversely, the extraction of functional materials showed a tendency to increase as the extraction time increased. Caffeine reached the maximum value after two hours soaking, but showed the same result as one hour for sonication. Chlorogenic acid did not show difference from the content of coffee extracted for one hour soaking only by sonication extraction for 30 minutes. The total polyphenols eluted with approximately two hours of soaking even after 30 minutes of sonication. DPPH and ABTS were insignificant in their concentrations, but their antioxidative effect was more than two hours of soaking with only 30 minutes of sonication. Sonication has a short time extraction from a functional aspect (caffeine content, chlorogenic acid, polyphenol content, and antioxidant capacity) and this experiment can provide basic data for the development of innovative recipes.

• Preventive Nutrition and Food Science
• /
• v.16 no.1
• /
• pp.67-73
• /
• 2011

The objective of this research was to investigate the effects of soaking time (6, 12 and 24 hr) and steeping temperature (25, 30 and $35^{\circ}C$) on germination time, germination percentage and weight loss of wheat and barley. Changes in chemical composition (such as protein, fat, and ash), reducing sugar content, enzyme activity and pasting profile and GABA ($\gamma$-animobutyric acid) content of germinated wheat and barley were also evaluated. The results clearly suggest that the short soaking time and lower steeping temperature significantly decreased germination time and weight loss, while germination percentage increased. Regarding the chemical composition, the protein content of wheat and barley was slightly increased after germination but there was no significant difference in content of crude fat and ash of both germinated cereals. The reducing sugar content of both germinated cereals decreased as the steeping temperature increased from $25^{\circ}C$ to $35^{\circ}C$. Increasing soaking time and steeping temperature led to increased amylase activity, and also corresponded to reduced paste viscosity. The highest GABA content that occurred with soaking times of 6 and 12 hr and a steeping temperature of $35^{\circ}C$ was 1,467.74 and 1,474.70 ${\mu}g/g$ for germinated wheat and 2,108.13 and 1,691.85 ${\mu}g/g$ for germinated barley. This study indicated that the optimum germination process for wheat and barley is a low steeping temperature and a short soaking time.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.808-817
• /
• 2016

In this study, we investigated the effects of pre-soaking in salt and sugar solution prior to air drying at $50^{\circ}C$ on the characteristics of dried apples. Pre-soaking solutions included single solutions of salt 2% and sugar 2%; and combined solutions of salt 2%+sugar 2% and salt 2%+sugar 5%, respectively. The effects of pre-soaking condition and drying were evaluated in terms of moisture content (MC), water activity, color, antioxidant activity determined by DPPH radical scavenging activity, shear force, microbial contents, and sensory evaluation of apple slices. The control sample without pre-soaking showed the most rapid drying rate; in addition, the single solutions showed higher MC and water activity after drying time of 120 min, as compared to combined solutions. In all samples, MC and water activity showed high correlation coefficients of 0.91 to 0.97; whereas, shear force was negatively correlated with MC and water activity. The single solution of salt 2% showed decrease in change of color, including L, a, and b values, and the number of aerobic bacteria during drying. In addition, highest antioxidant activity and values of sensory preferences were observed in the dried apple pre-soaked in single solution of salt 2%.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.511-514
• /
• 1992

The effects of soaking conditions (time and temperature) of rice on the water absorption behaviors and the consequent textural properties after cooking were investigated. Water absorption during soaking was completed in 30 min at $23^{\circ}C$, while the hydration continued up to 60 min at $4^{\circ}C$. The hardness (H) of the cooked rice decreased, while the stickiness (S) and S/H ratio increased with increased soaking time. Soaking at $23^{\circ}C$ gave higher values of S and S/H of cooked rice than soaking at $4^{\circ}C$. Soaking for $10{\sim}40\;min$ at $4^{\circ}C$ or for $10{\sim}20\;min$ at $23^{\circ}C$ resulted the value of S/H between 0.15 and 0.20, which had been found at acceptable textural parameters of the cooked rice.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.304-309
• /
• 2007

In this study, the "Multi Well Plate-type cell Apparatus" was designed and setup for performing the producing experiments of methane hydrate by depressurization, heat stimulating methods. In order to characterizing the producing mechanism of hydrate through porous materials, the experiments for various producing methods have been conducted with the aid of the apparatus which has high permeability. In the experimental result of depressurization method, the pressure is temporarily increased unlikely conventional gas reservoir due to the sourcing effect of hydrate dissociation in the pore. Meanwhile, the temperature is decreased because of the endothermic reaction while hydrate is dissociated. In the experimental results of heat stimulating method, the dissociation in depressurization method is more slowly processed than that in thermal method, and hence, its gas production is lower. In the case of production right after heating, hydrate is dissociated only near injecting point and the permeability becomes greater at that area only. It infers that the more gas is produced during relatively earlier producing period. Since then, the hydrate is more slowly dissociated than the case of production after heating and soaking. This time, the performances of pressure and production obtained by thermal method have been analyzed in order to investigate the effect of soaking time on gas recovery. As a result, the gas recoveries in the case of 2 min and 4 min soaking are higher than case in 6 min soaking. This is reason that hydrate is reformed due to the decrease of temperature. It is expected that the experimental results obtained in this work may be more clearly explained by utilizing the lower permeable porous system with the greater hydrate saturation.

• Journal of Korea Foundry Society
• /
• v.24 no.4
• /
• pp.231-237
• /
• 2004

Bake hardenable steel utilizes the phenomenon of strain aging to provide an increase in the yield strength of formed components. An increase of the carbon content will improve the bake hardening response: more solutes are available to pin mobile dislocations and to form the clusters more rapidly. But aging resistance decrease as increasing solute carbon. In order to under-stand the compatibility between bake hardenability and aging resistance. The optimum solute carbon control methods during manufacture should be determined. In this paper, the effect of continuous heat cycle conditions such as soaking temperature, rapid cooling start temperature, cooling rate on BH(Bake Hardenability), AI(Aging Index), YP-El(Yield Point Elongation) and other mechanical properties have been investigated. and following results were obtained. In the case of soaking temperature, BH increases with higher soaking temperature because of NbC $dissolution(830^{\circ}C)$, Therefore the solute carbon and BH at $850^{\circ}C$ and $870^{\circ}C$ are higher than these at $810^{\circ}C$. But BH at $870^{\circ}C$ is a little lower than that at $850^{\circ}C$ owing to the ferrite grain size. The measurement of amount of dissolution C using IFT(Internal Friction Test) can explain the relation of solute carbon and BH.