• Food Science and Preservation
• /
• v.7 no.2
• /
• pp.218-221
• /
• 2000

The effect of the amounts of kimchi (100, 200 and 300 g) and fermentation temperature (10, 15 and 20$^{\circ}C$) on gas formation of kimchi during fermentation were investigated. The pH of the 200 g packaged kimchi for 12 days at 10-15$^{\circ}C$ was higher than 100 g and 300 g packaged kimchi, whereas that of 100 g packaged kimchi at 20$^{\circ}C$ was higher than the other products. Total lactic acid bacteria in was highest in the 200-300 g packaged kimchi fermented for 12 days at 10$^{\circ}C$. Number of Leuconostoc mesenteroides and Lactobacillus plantarum of 200 g packaged kimchi higher with the lower fermentation temperature, and that of Lactobacillus plantarum was higher in the kimchi fermented at 15$^{\circ}C$. The periods of gas formation was 8-11 days of fermentation at 10$^{\circ}C$, 1-7 day at 15$^{\circ}C$, and 5-6 days at 20$^{\circ}C$, respectively. The order of gas formation amount in the temperature and amount of kimchi was 15 > 20 > 10$^{\circ}C$ and 300 > 200 > 100 g, respectively.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.219-224
• /
• 2020

Urea formaldehyde resins are widely used in the manufacturing of wood composite and their usage is always combined with release of formaldehyde characterized to be hazardous to health during and after the manufacturing of the products. This study investigates the effectiveness of wood-based adhesive from oil of pyrolysed Triplochiton scleroxylon sawdust for the production of composite board. The wood-derived Pyrolytic Oil (PyO) was blended with Urea Formaldehyde (UF) resin to formed Pyrolytic Oil-Urea Formaldehyde (PyOUF). The obtained PyOUF called Wood-Based Adhesives at four blends and control (UF) viz; 1:1, 1:2, 1:3, 2:1, 1:3 were further employed to prepare the composite board and test for their bonding strength by physical (water absorption-WA and thickness swelling-Th.S) and mechanical properties (modulus of elasticity-MOE, modulus of rupture-MOR, and impact bending-IB). Data obtained was analysed using analysis of variance at α 0.05. The result of analysis of variance conducted on physical properties show significant difference (p≤0.05) between the WA values obtained when testing the different blending proportion of PyOUF and likewise between 2 and 24 h of immersion. PyOUF had significant effect (p≤0.05) on Th. S for 24 h but no significant different (p>0.05) for the 2 h period of soaking. The analysis of variance on mechanical properties of the composite board (MOE, MOR, and IB) show significance differences (p≤0.05) between the strength values obtained when testing the different ratios of PyO with UF. PyO content influenced the properties of the boards and it is evident that PyO can be used in the manufacture of composite board.

• KSBB Journal
• /
• v.28 no.5
• /
• pp.319-326
• /
• 2013

This study was carried out to investigate the in vitro and in vivo moisturizing properties and percutaneous absorption of PEG-impregnated Aloe vera gel. The PEG-i-Aloe gel was obtained from dewatering and impregnation by soaking (DIS) of Aloe vera leaf slice. The moisturizing property of the obtained sample was evaluated by moisture determination using gravimetric method in desiccator under different RH% and by water sorption-desorption test on human skin. The transdermal penetration characteristics of PEG-i-Aloe gel was investigated by Franz diffusion cell in vitro transdermal absorption method. PEG-i-Aloe gel had high moisture retention ability and could significantly lead the enhancing skin hydration status as well as reducing the skin water loss due to the film formation as a skin barrier. The skin penetration rate of PEGi- Aloe gel at steady state was 9.76 ${\mu}g/(h{\cdot}cm^2)$ and the quantity of the transdermal absorption was 144 ${\mu}g/cm^2$ in 9 hr. The penetration mechanism was well fitted with Higuchi model ($R^2$ = 0.974-0.994). The results show that PEG-i-Aloe gel has the significant moisturizing effect and strong penetration of the animal skin. It could be used as the moisturizing additive in cosmetic skin products.

• KSBB Journal
• /
• v.28 no.6
• /
• pp.356-365
• /
• 2013

The novel Aloe gels were prepared with dewatering and impregnation by soaking (DIS) processing of Aloe vera leaf slice at four different temperatures (25, 35, 45 and $55^{\circ}C$), using dehydration solution of 40% (w/v) polyethylene glycol (PEG4000). The PEG-impregnation to Aloe vera leaf slice during DIS was observed depending on immersion temperature, and the PEG-impregnated Aloe vera gel (PEG-i-AVG) obtained was characterized using $^1H$ NMR, FT-IR, GPC, XRD and TGA. The PEG-i-AVG had the higher levels of Aloe bioactives (glucomannan and O-acetyl contents) and better quality indices by $^1H$ NMR and FT-IR spectroscopy than those of native Aloe gel. Also, the obtained Aloe gel maintained the bimodal patterns in higher molecular weight region by GPC indicating no degradation of polysaccharide from native Aloe gel. The result observed by SEM confirmed a surface modification by forming the porous structure, and TGA result exhibited better thermal stability than that of native Aloe gel. XRD result revealed that the crystalline structure in Aloe gel was led by incorporation of PEG. Significant decrease of %insolubility and high enhancement of water solubility index were observed, respectively, and highly ordered conformation such as a helix structure was also indicated by Congo red reaction. We concluded that the modification effect for enhancing function of native Aloe gel was successfully obtained by DIS process using PEG as a dehydrating agent. These results suggested that this DIS process had a high potential for developing a new minimally processed product from Aloe vera leaf.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.333-337
• /
• 2007

This study was conducted to assess effects of soil moisture condition and ventilation on development of fermented fruit of oriental melon. In higher soil moisture condition (-10 kPa), roots absorbed more water and transpiration was decreased under low temperature and high humidity conditions. Development of fermented fruit may be come from absorbed water concentrated placenta with higher soluble solid. Fermented fruit was developed with higher level at Shintozoa and Elite, was developed with lower level at Hongtozoa, and was not developed at self-rooting of oriental melon. Ventilation on fruit did not affect development of fermented fruit at Shintozoa, Elite, Hongtozoa and self-rooting seedling. Ca contents of flesh and placenta of fruit under ventilation treatment were higher than control but contents of Acetaldehyde, Ethanol and Ethylacetate were lower.

• Advances in Traditional Medicine
• /
• v.6 no.3
• /
• pp.186-195
• /
• 2006

The present study was carried out to determine the involvement of opioid and non-opioid receptor and the effect of pH and enzymes on the recently reported antinociceptive activity of aqueous extract of Corchorus olitorius (AECO) leaves using the abdominal constriction test. The extract was prepared by soaking the dried powdered leaves of Corchorus (C.) olitorius in distilled water overnight, and the supernatant obtained was considered as a stock solution with 100% concentration/ strength. The extract, administered subcutaneously in the concentrations/ strength of 10, 50 and 100%, was found to show a significant concentration-independent antinociception. The 50% concentration AECO were further used to study on the above mentioned parameters. The extract exhibited: significant (P < 0.05) decreased in activity when pre-treated (s.c.) against 10 mg/kg naloxonazine, bicuculine (10 mg/kg), phenoxybenzamine (10 mg/kg), 10 mg/kg pindolol, and 5 mg/kg mecamylamme, but not 10 mg/kg naltrindole, 10 mg/kg atropine, respectively; significant (P < 0.05) decreased in activity after pre-treatment against 10% a-amylase, but not 1 % protease or 10% lipase and; significant (P < 0.05) decreased in activity after exposure to alkaline condition (pH between 9 and 13) while maintaining the activity at acidic condition, respectively. The C. olitorius leaves antinociception, which involved, at least in part, activation of $\mu-opioid,\;\alpha-and\;\beta-adrenergic$, and nicotinic receptors, was found to decrease under alkaline condition and in the presence of $\alpha-amylase$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.4 no.1
• /
• pp.125-129
• /
• 1968

For the study of method for promoting the germination of Korean sod seeds harvseted newly some physical and chemical treatments were tested in this experiment. The summarized results of these tests are as follows: 1. Storage of wet seed in low temperature of 0~$2^{\circ}C$ during 2~30 days was seemed the most effective treatment for promoting the germination of sod seed. 2. The treatment that Soaking and mixing up the seeds in cone sulphuric acid about one and half minutes and then washing off in the water promoted fairly the germination of sod seeds. 3. Better germination of sod seeds was found in the light than in the dark or soil. 4. Cutting the top of seed and crushing of seed coat with sand seemed to promote slightly the germination of sod seeds. 5. No promoting effect for germination of sod seeds was found with treatments of Gibberellin, $NH_4$ $NO_3$ and NAA.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.297-300
• /
• 2007

In this study, we have attempted a new method to enhance the coloring of dye on the $TiO_2$ surface in the dye sensitized solar cell. In the conventional coloring process in a dye sensitized solar cells, dye is absorbed by the covalent bond between TiO2 and dye molecule while the photo-electrode coated with $TiO_2$ layer is soaked in dye solution for about 12-24 hours. But this process takes long time, so we have researched more effective and faster way than the conventional process by applying electric field. Three kinds of electric power such as direct voltage, alternating voltage and pulse voltage were applied to the transparent conducting oxide during the coloring process. As a result, we achieved improved power, fill factor and efficiency of dye-sensitized solar cell in case of applying direct voltage and pulse voltage. In contrast, alternating voltage tend to reduce the dye adsorption on the $TiO_2$ surface and hence the efficiency. We measured the absorption spectra of dye by UV-VIS spectrophotometer before and after soaking the $TiO_2$ in the dye and found no characteristic change in the dye was observed. In this study, we researched on shortening time of coloring process which spent much time in the whole process.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.537-542
• /
• 2011

Magnesium hydroxide as a non-halogen flame retardant has increasing attention due to its non-toxicity, high decomposition temperature and smoke suppressant ability during combustion. For the application of magnesium hydroxide retardant to the textile by soaking and coating method, the prerequisite for the coating is a small particle size, stable dispersion, and adhesion to the textile. The dispersion of $Mg(OH)_2$ particles and stability of the coating was checked by monitoring the change of transmittance and backscattering by varying the types of dispersion agents, binder, solvent, and $Mg(OH)_2$ source, and their compositions in the coating. The $Mg(OH)_2$ dispersion coating was applied to PET(poly(ethylene terephthalate)) non-woven textile. The physical properties are characterized by surface morphology, amount of coating, particle dispersion, and adhesion test. The flame retardant $Mg(OH)_2$ coated textile has been compared by limited oxygen index(LOI) and thermal gravimetry and differential scanning calorimetry(TG-DSC). It was found that phosphorous additive may give synergistic effect on $Mg(OH)_2$ flame retardant coating to make the flame retardant PET non-woven textile.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.3
• /
• pp.198-204
• /
• 2001

$GA_3$ treatments for seeds of Perilla frutescens var. acuta Kudo were evaluated as a means of improving the percent germination, and the interactions of $GA_3$, mulching, and sowing depth on seedling emergence were investigated in late sowing. Percentage germination of seeds treated with different concentration of $GA_3$ was the most effective in 100 ppm treatment for 24 hours. The germinability according to the seeds soaking time was not significantly different over 12 hours in 100 ppm $GA_3$. At high temperature $(25^{\circ}C\;and\;30^{\circ}C)$, percentage germination was significantly increased in 100 ppm ${GA_3}$ treatment. In late sowing (1th or 15th May), seedling emergence was significantly higher in 100 ppm $GA_3$ treatment than nontreatment, and that was significantly increased when the seeds treated with 100 ppm $GA_3$ were mulched with 10 mm rice hull after molding with 5 mm soil depth.