• Advances in materials Research
• /
• v.13 no.3
• /
• pp.161-171
• /
• 2024

This study aimed to investigate the effect of physicochemical properties and mix ratios of iron ore (oxide feed): coke (reductant) on the carbothermic reductions of iron ore. Coke size was fixed at ≤63 ㎛ while iron ore size varied between 150-63 ㎛ and ≤63 ㎛ respectively. Mix ratios were changed from 100:0 (reference) to 80:20 and 60:40 while the temperature, heating rate and soaking duration in muffle furnace were fixed at 1100 ℃, 10 ℃/min and 1 hour. Particle size analyzer, XRF, CHNS and XRD analyses were used for determination of raw feed characteristics. The occurrence of phase transformations from various forms of iron oxides to iron during the carbothermal reductions were identified through XRD profiles and supported with weight loss (%). XRF analysis proved that iron ore is of high grade with 93.4% of Fe₂O₃ content. Other oxides present in minor amounts are 2% Al₂O₃ and 1.8% SiO₂ with negligible amounts of other compounds such as MnO, K₂O and CuO. Composite pellet with finer size iron particles (≤63 ㎛) and higher carbon content of 60:40 exhibited 45.13% weight lost compared to 32.30% and 3.88% respectively for 80:20 and 100:0 ratios. It is evident that reduction reactions can only occur with the presence of coke, the carbon supply. The small weight loss of 3.88% at 100:0 ratio occurs due to the removal of moisture and volatiles and oxidations of iron ore. Higher carbon supply at 60:40 leads into better heat and mass transfer and diffusivity during carbothermic reductions. Overall, finer particle size and higher carbon supply improves reactivity and gas-solid interactions resulting in increased reductions and phase transformations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.4
• /
• pp.465-474
• /
• 1996

The study was carried out to determine the proper concentration of plant growth regulator, kinetin on alleviating copper toxicity for two rice cultivars of seed germination. The results were as followings : Soaking treatment of kinetin 10$^{-3}$ M increased the germination rate of both cultivars, Ilpumbyeo and Hyangmibyeo 1 by 92% and 88% as compared with copper treatment (60ppm). But the soaking treatment effect of plant growth regulator, kinetin was not recognized at the kinetin 10$^{-4}$ M and 10$^{-5}$ M. Chlorophyll content of both rices was higher than that of Hyangmibyeo 1. Copper content of Ilpumbyeo was higher in leaf than in seed part. At the 3 days after treatment of copper 60ppm, both cultivars of treatment of kinetin 1O-3M showed the somewhat thin bands at the 35 and 40kDa compared with others. A new protein band pattern was only appeared to kinetin 1O-3M at approximately 54.4kDa(M. W) at the 7 days after treatment of copper 60ppm in llpumbyeo cultivar, SOD activity of copper 60ppm treatment increased in 3DAT, but there were no significant differences in 5 and 7DAT of two cultivars. Free proline contents of copper 60ppm treatment in llpumbyeo were remarkably increased about 4.996$\mu$M. In particular, free proline content of kinetin l0$^{-3}$ M in Ilpumbyeo was 5.008$\mu$M in 3DAT. In case of Hwangmibyeo 1, free proline content of copper 60ppm was 5.825$\mu$M compared with an untreated control showing 2.34l$\mu$M. The effects of kinetin treatment were recognized to promote the root growth and germination rate under copper toxicity(60ppm) condition in both cultivars.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.20-26
• /
• 1984

This study was carried out to investigate the influence of chemical type and its retention in the fire-retardant treated plywoods on the static bending strength, a property peculiar to plywood. Being soaked in 20% aqueous solution of $(NH_4)_2SO_4$, $NH_4H_2PO_4$, $(NH_4)_2HPO_4$. Borax-Boric acid and Minalith for 3 to 12 hours at three-hour intervals and redried at $120^{\circ}C$ in hot press, the treated plywoods were put to static bending test. The values of chemical treated plywoods in Stress at proportional limit, Modulus of elasticity, Modulus of rupture and Work per unit volume to proportional limit were widely higher than those of water treated plywoods(control) and Borax-Boric acid treatment showed the highest value in the four mechanical data. And the bending strength of fire-retardant treated plywoods increased with the extension of soaking time or the increase of chemical retention in themselves. Borix-Boric acid was the desirable fire-retardant for thin plywood in view of mechanical strength and soaking defects in this study.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.428-433
• /
• 2003

We measured the effect of wettability of six MPSs for RGP(rigid gas permeable) lens. The used MPSs(multipurpose solutions) were OPTI-SOAK(ALCON), SOLO care hard(CIBA Vision), Total care(ALLERGAN), Simplicity(BOSTON), Wetting and Soaking Sol.(Bausch & Lomb) and Aquas-multi(Saehan). These MPSs keeps hydrophilic property of lens surface and increase the effect of cleaning or increase the effect of preservative effect. To compare with the effect of wettability we followed the way of contact angle measurement which was general way to measure wettability and compared lens which was conducted by each MPS made by different companies. As a control, 0.9% NaCl solution and artificial tears were used. The degree of the effect of wettability was decided by contact angle. It is hydrophilic property nearby $0^{\circ}$ of contact angle and it is closed by hydrophobic property as it increases. The results showed that every lens was nearby hydrophilic property within $25\;^{\circ}-36\;^{\circ}$. Also, it was differed by various factors. The surface tension showed various differences between 19.8 and 31.3 mN/m. In the viscosity, MPSs represented the highest viscosity between $4^{\circ}C$ and $20^{\circ}C$. It was much higher than compared with the viscosity of soft lens MPS. This experiment could be used to grasping the interaction between solutions used to MPS and the natural endowments of lens and to considering the relations of different factors effecting the wettability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1273-1277
• /
• 2002

The effect of urea treatment on chemical composition of neem seed kernel cake (NSKC) was investigated by soaking the cake in 2.1% urea solution (1.2 l $kg^{-1}$ NSKC) for five days. The effect on utilisation of nutrients by replacing groundnut cake (GNC) (30%) with urea-treated neem seed kernel cake (UTNSKC) (33%) in a concentrate mixture fed to meet 70% of the protein requirements of lambs (8 males and 8 females), was monitored in a digestibility study. Following urea treatment of NSKC only 9.5% of urea was hydrolysed and the crude protein content of the cake was increased by 6.65%. The tannin content in depulped neem seeds was 37% catechin equivalent. Whereas feeding UTNSKC had no effect on intake of dry matter (72.5 vs 66.3 g/kg $BW^{0.75}day^{-1}$) and digestibility of crude fibre (41.3 vs 43.4%), the cake depressed (p<0.01) the percent digestibility of dry matter (63.7 vs 70.2), crude protein (63.2 vs 70.2), nitrogen free extract (73.8 vs 80.5) and gross energy (64.3 vs 69.1). Digestibility of ether extract (75.8 vs 70.9%) was higher (p<0.05) in animals offered UTNSKC. The nutritive value of the composite ration consumed by lambs offered UTNSKC was lower (p<0.01) in terms of total digestible nutrients (64.7 vs 70.2%) and digestible energy (2.8 vs 3.0 Kcal/g DM). Intake of digestible energy (199.8 vs 194.1 Kcal/kg $BW^{0.75}day^{-1}$) and retention of nitrogen (7.53 vs 8.23 g $day^{-1}$) and calcium (2.12 vs 1.84 g $day^{-1}$) were comparable on the 2 rations. Animals fed UTNSKC retained less (p<0.01) phosphorus (0.37 vs 1.05 g $day^{-1}$). The results indicate that urea treatment increased the protein level of NSKC whereas feeding the treated cake as a replacement of GNC, lowered the digestibility of nutrients and retention of phosphorus.

• Korean journal of applied entomology
• /
• v.62 no.4
• /
• pp.355-363
• /
• 2023

In addition to causing direct feeding damage to a variety of greenhouse crops, Frankliniella occidentalis also inflicts indirect harm by facilitating the transmission of the tomato spotted wilt virus. Historically, the prevention of F. occidentalis infestations has relied heavily on pesticide use. However, this approach has led to significant side effects in agricultural ecosystems, including the development of pest resistance and challenges in effective prevention. In response to these issues, research has been directed towards identifying alternative substances that circumvent the tolerance developed against chemical pesticides. Extracts from sixty-seven medicinal plants were prepared by soaking them in water for 24 hours at room temperature. These extracts were then applied to adult F. occidentalis, with particular attention to moutan extract treatment. This treatment demonstrated a 100% insecticidal effect on the first day. The moutan extract, specifically, was prepared using 50% ethanol, after which the ethanol and water were removed via a rotary evaporator. The resultant product was then lyophilized into a powder and used after being diluted with water. In indoor experiments, a 40% diluted solution was sprayed onto F. occidentalis, exhibiting a 100% insecticidal effect 24 hours post-treatment. Furthermore, a pot test indicated a 78% insecticidal effect on the first day of application. Ongoing research includes the analysis of active substances that demonstrate exceptional insecticidal properties and the conduct of on-site validation tests. The application of the aforementioned extract is anticipated to be effective in the prevention of F. occidentalis infestations.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.13-44
• /
• 1982

1. Since long time ago, it has been talked about that soaking wood into water for a long time would be profitable for the decreasing of defects such as checking, cupping and bow due to the undue-shrinking and swelling. There are, however, no any actual data providing this fact definitly, although there are some guesses that water soluble extractives might effect on this problem. On the other hand, this is a few work which has been done about the effect of water soluble extractives upon the some physical properties of wood and that it might be related to the above mentioned problem. If man does account for that whether soaking wood into water for a long time would be profitable for the decreasing of defects due to the undue-shrinking and swelling in comparison with unsoaking wood or not, it may bring a great contribution on the reasonable uses of wood. To account for the effect of water soluble extractives upon physical properties of wood, this study has been made at the wood technology laboratory, School of Forestry, Yale university, under competent guidance of Dr. F. F. Wangaard, with the following three different species which had been provided at the same laboratory. 1. Pinus strobus 2. Quercus borealis 3. Hymenaea courbaril 2. The physical properties investigated in this study are as follows. a. Equilibrium moisture content at different relative humidity conditions. b. Shrinkage value from gre condition to different relative humidity conditions and oven dry condition. c. Swelling value from oven dry condition to different relative humidity conditions. d. Specific gravity 3. In order to investigate the effect of water soluble extractives upon physical properties of wood, the experiment has been carried out with two differently treated specimens, that is, one has been treated into water and the other into sugar solution, and with controlled specimens. 4. The quantity of water soluble extractives of each species and the group of chemical compounds in the extracted liquid from each species have shown in Table 36. Between species, there is some difference in quantity of extractives and group of chemical compounds. 5. In the case of equilibrium moisture contents at different relative humidity condition, (a) Except the desorption case at 80% R. H. C. (Relative Humidity Condition), there is a definite line between untreated specimens and treated specimens that is, untreated specimens hold water more than treated specimens at the same R.H.C. (b) The specimens treated into sugar solution have shown almost the same tendency in results compared with the untreated specimens. (c) Between species, there is no any definite relation in equilibrium moisture content each other, however E. M. C. in heartwood of pine is lesser than in sapwood. This might cause from the difference of wood anatomical structure. 6. In the case of shrinkage, (a) The shrinkage value of the treated specimen into water is more than that of the untreated specimens, except anyone case of heartwood of pine at 80% R. H. C. (b) The shrinkage value of treated specimens in the sugar solution is less than that of the others and has almost the same tendency to the untreated specimens. It would mean that the penetration of some sugar into the wood can decrease the shrinkage value of wood. (c) Between species, the shrinkage value of heartwood of pine is less than sapwood of the same, shrinkage value of oak is the largest, Hymenaea is lesser than oak and more than pine. (d) Directional difference of shrinkage value through all species can also see as other all kind of species previously tested. (e) There is a definite relation in between the difference of shrinkage value of treated and untreated specimens and amount of extractives, that is, increasing extractives gives increasing the difference of shrinkage value between treated and untreated specimens. 7. In the case of swelling, (a) The swelling value of treated specimens is greater than that of the untreated specimens through all cases. (b) In comparison with the tangential direction and radial direction, the swelling value of tangential direction is larger than that of radial direction in the same species. (c) Between species, the largest one in swelling values is oak and the smallest pine heartwood, there are also a tendency that species which shrink more swell also more and, on the contrary, species which shrink lesser swell also lesser than the others. 8. In the case of specific gravity, (a) The specific gravity of the treated specimens is larger than that of untreated specimens. This reversed value between treated and untreated specimens has been resulted from the volume of specimen of oven dry condition. (b) Between species, there are differences, that is, the specific gravity of Hymenaea is the largest one and the sapwood of pine is the smallest. 9. Through this investigation, it has been concluded that soaking wood into plain water before use without any special consideration may bring more hastful results than unsoaking for use of wood. However soaking wood into the some specially provided solutions such as salt water or inorganic matter may be dissolved in it, can be profitable for the decreasing shrinkage and swelling, checking, shaking and bow etc. if soaking wood into plain water might bring the decreasing defects, it might come from even shrinking and swelling through all dimension.

• Corrosion Science and Technology
• /
• v.15 no.3
• /
• pp.120-124
• /
• 2016

The effect of alloying element Ca (0, 1, and 2 wt%) on corrosion resistance and bioactivity of the as-received and anodized surface of rolled plate AM60 alloys was investigated. A plasma electrolytic oxidation (PEO) was carried out to form anodic oxide film in $0.5mol\;dm^{-3}\;Na_3PO_4$ solution. The corrosion behavior was studied by polarization measurements while the in vitro bioactivity was tested by soaking the specimens in Simulated Body Fluid (1.5xSBF). Optical micrograph and elemental analysis of the substrate surfaces indicated that the number of intermetallic particles increased with Ca content in the alloys owing to the formation of a new phase $Al_2Ca$. The corrosion resistance of AM60 specimens improved only slightly by alloying with 2 wt% Ca which was attributed to the reticular distribution of $Al_2Ca$ phase existed in the alloy that might became barrier for corrosion propagation across grain boundaries. Corrosion resistance of the three alloys was significantly improved by coating the substrates with anodic oxide film formed by PEO. The film mainly composed of magnesium phosphate with thickness in the range $30-40{\mu}m$. The heat resistant phase of $Al_2Ca$ was believed to retard the plasma discharge during anodization and, hence, decreased the film thickness of Ca-containing alloys. The highest apatite forming ability in 1.5xSBF was observed for AM60-1Ca specimens (both substrate and anodized) that exhibited more degradation than the other two alloys as indicated by surface observation. The increase of surface roughness and the degree of supersaturation of 1.5xSBF due to dissolution of Mg ions from the substrate surface or the release of film compounds from the anodized surface are important factors to enhance deposition of Ca-P compound on the specimen surfaces.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.1 no.1
• /
• pp.51-62
• /
• 2014

The purpose of this experiment was to evaluate the apatite-formation abilities of low-modulus Ti-7.5Mo substrates treated with NaOH aqueous solutions and subsequent ethyl alcohol aging before soaking them in simulated body fluid. Specimens of Ti-7.5Mo were initially treated with 5 M NaOH at $60^{\circ}C$ for 24 h, resulting in the formation of a porous network structure composed of sodium hydrogen titanate. Afterwards, the specimens were aged in ethyl alcohol at $60^{\circ}C$ for 5 or 10 min, and subsequently immersed in simulated body fluid at $37^{\circ}C$ for 3, 7 and 14 days. Ethyl alcohol aging significantly increased the apatite-forming abilities of Ti-7.5Mo. The amount of apatite deposited on the Ti-7.5Mo after NaOH treatment and subsequent ethyl alcohol aging was much greater, especially after the Ti-7.5Mo specimens were aged for 5 min. Due to its excellent combination of bioactivity, low elastic modulus and low processing costs, the Ti-7.5Mo treated with NaOH aqueous solutions and subsequently aged in ethyl alcohol has promising heavy load-bearing applications.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.191-201
• /
• 2010

This study attempted to examine the application of retrograded starch (RS3) isolated from rice flour into Madeleine which is easy to make, supply enough energy and micro nutrients with adequate drinks, and prevent an adult disease. This could be a popular food to anyone regardless of age and gender who avoid rice and become high value-added, processed rice foods. For this, control Madeleine was made from wheat flour and an experimental one was made from 5 or 10% rice RS3 addition as well as wheat flour. Four different types of rice were produced from Premium Ho-Pyong Rice, that is, dry milled rice flour(RFD), soaked for 8 hours and milled, followed by air-dried rice flour(RFW), rice starch(RST), and retrograded rice starch or enzyme-resistant starch(RS3). The results found were as follows: Proximate compositions were decreased with soaking to make RFW, RST and RS3, compared to RFD. RS3 had the highest L, +a and ${\Delta}E$ with the lowest +b, changing it to a dark color, explaining the need for heat control during processing. At $80^{\circ}C$, the swelling power was shown in the order of RST>RFW>RFD>RS3 and the solubility of RS3 was the highest. There were significant differences in viscosities of peak, trough, cold, breakdown and total setback of all rice samples using RVA (p<0.001). Due to the pH of RS3, the Madeleine batter became acidic (p<.01) and expanded, resulting in more air cells and open texture. With an increasing RS3 level in Madeleine, several textural attributes among 'fresh' and 'stored at room temperature' Madeleine samples were significantly different by using Texture Analyzer. While the addition of RS3 in Madeleine did not significantly affect the sensory evaluation, indicating RS3 isolated from rice as a beneficial ingredient for processed rice products.