• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.256-264
• /
• 2011

By implementing an analysis on the liquid flame proof agent infiltration of microwave-heated wood under soaking conditions (room temperature soaking, heat soaking), its correlation with wood temperature, and the structure of wood and permeating components after soaking in flame proof agent, which was carried out as basic research in order to improve the fire resistance performance of the wood itself, it is found that the infiltration increases as the microwave heating time increases, while for heat soaking, it is found that high infiltration as well as the stable permeability of flame proof agent is achievable. Also, when the wood temperature is more than $80^{\circ}C$, the infiltration by the flame proof agent increased, and a very even infiltration of flame proof agent was observed, which implies that the liquid flame proof agent has a dependency on temperature change of the wood as a condition to penetrate into the wood. As a result of fine structure analysis, the flame proof agent transfer between cells through pits was considered as a cause to increase the infiltration of flame proof agent, and it is also shown that for heat soaking among the permeating component analysis, as the crystallized flame proof agent around the heartwood and sapwood inner pits increases, the flame proof agent can penetrate into the the heartwood part.

• Journal of the Korean Ceramic Society
• /
• v.20 no.4
• /
• pp.347-355
• /
• 1983

A batch mixture was prepared as 16mol% CaO-84mol% $ZrO_2$ of regeant-grade powder. The monoclinic Zirconia powder had an average particle size of $9.24 \mu\textrm{m}$ and calcium carbonate powder had a reported purity of 99.7 weight percent and mean particle size of TEX>$24, 37<\mu\textrm{m}$. The specimens were fired at 1400, 1500, 1650 and $1750^{\circ}C$ for 0. 3, 5 and 7 hours respectively. After fired the specimens were investigated using Scaning electron microscopy. Density Porosity Compressive strength Modulus of rupture and Thermal expansion were measured X-ray diffration analysis was also carried out. The results are as follows ; 1) As the firing temperature or soaking time was increased firing linear shrinkage apparent density compressive strength and modulus of rupture increased but apparent porosity decreased, 2) Cubic and monoclinic Zirconia was found at $1400^{\circ}C$ and cubic Ziconia found above $1500^{\circ}C$ 3) The specimens fired at 140$0^{\circ}C$ without soaking display thermal expansion curves by monoclinic〓tetragonal transformation and no tranformation was found at $1400^{\circ}C$ for 5hrs and above $1500^{\circ}C$. 4) The lattice parameter had constant value of 5.1345 $\AA$ through all the ranges of firing temperature 5) The higher the firing temperature was or the longer the soaking time was the larger the grain size was.

• Journal of the Korean Ceramic Society
• /
• v.22 no.2
• /
• pp.63-67
• /
• 1985

$BaTiO_3$ and $SrTiO_2$ were mixed with the mole ratio of 36:65:50, 50: 50 and 65:35 and then heated at 110$0^{\circ}C$~130$0^{\circ}C$ for 1~64 hrs. The solid state reactions and dielectric properties were investigated as a function of amount of solid solution. Activation energy of solid solution decreased with increasing amount of $BaTiO_3$ due to fast diffusion of $Ba^{2+}$ ions. Dielectric constants increased with increasing the soaking time at 125$0^{\circ}C$and 130$0^{\circ}C$ and Curie Temperature shifted to higher temperature with increasing the soaking time at 125$0^{\circ}C$ and 130$0^{\circ}C$. It attributes to the am-ount of solid solution and grain growth, Dielectric constants decreased and Curie Temperature shifted to lower temperature due to decreasing polari-zability.

• Korean journal of food and cookery science
• /
• v.11 no.2
• /
• pp.93-97
• /
• 1995

Effects of added ginger juice in Yackwa on the sensory quality and the lipid oxidation were studied. Also effects of soaking on the lipid oxidation were examined. There were no significant differences between Yackwa without adding ginger juice and ones with adding ginger juice on texture, shape, color. However, Yackwa, with ginger juice more than 1 tea spoon(1.5) of ginger juice per 1 cup of flour, was better than one without ginger juice on taste, flavor and overall acceptibility. Added ginger juice showed the antioxidant effect during frying in oil and storage at room temperature. The higher the amount of ginger juice was added, the slower of lipid oxidation was resulted in Yackwa. Yackwa soaked in syrup or in honey showed lower lipid oxidation than one without soaking during storage at room temperature. The antioxidant effect of soaking in honey was higher than one of soaking In syrup.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.724-728
• /
• 1995

Chemical compositions of dried Auricularia polytricha mushroom were analyzed when the dried mushroom were soaked in distilled water at different soaking condition. Physicochemical properties of soaked mushroom were investigated. Compositions of chemical components were 12.6% crude protein, 2.1% crude fat, 6.7% crude fiber and 6.2% ash. The contents of Ca, K, Mg were higher than those of other minerals in the sample, but Mn and Ni were of little quantities. The major amino acids of the sample were found to be aspartic and glutamic acid. The increase in the soaking time and temperature increased the ratio of water uptake, amount of water soluble solid, browning and pH value in the soak water. Ribonucleotide contents of the sample after soaking decreased depending on soaking time and temperature.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.4
• /
• pp.462-467
• /
• 1997

The DIS process(dewatering and impregnation soaking process) are using for dewatering of food materials at room temperature. And the DIS process are resulted in diffusion process as well as dewatering phenomena. During the DIS process, plasmolysis or cytorrhysis was happened by according to solute size. A tissue state of food material was very important variables for movement of water or solute, and running conditions are important for dewatering and impregnation. And models for DIS process were fundamentally given by Fick's law at unsteady state or mass balance. For example, Bicompartmental Model was given for quantification of water loss and solid gain.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.304-309
• /
• 2007

In this study, the "Multi Well Plate-type cell Apparatus" was designed and setup for performing the producing experiments of methane hydrate by depressurization, heat stimulating methods. In order to characterizing the producing mechanism of hydrate through porous materials, the experiments for various producing methods have been conducted with the aid of the apparatus which has high permeability. In the experimental result of depressurization method, the pressure is temporarily increased unlikely conventional gas reservoir due to the sourcing effect of hydrate dissociation in the pore. Meanwhile, the temperature is decreased because of the endothermic reaction while hydrate is dissociated. In the experimental results of heat stimulating method, the dissociation in depressurization method is more slowly processed than that in thermal method, and hence, its gas production is lower. In the case of production right after heating, hydrate is dissociated only near injecting point and the permeability becomes greater at that area only. It infers that the more gas is produced during relatively earlier producing period. Since then, the hydrate is more slowly dissociated than the case of production after heating and soaking. This time, the performances of pressure and production obtained by thermal method have been analyzed in order to investigate the effect of soaking time on gas recovery. As a result, the gas recoveries in the case of 2 min and 4 min soaking are higher than case in 6 min soaking. This is reason that hydrate is reformed due to the decrease of temperature. It is expected that the experimental results obtained in this work may be more clearly explained by utilizing the lower permeable porous system with the greater hydrate saturation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.69-74
• /
• 1987

The effects of soaking temperature on hydration and cooking rates of Chunmabyeo(Japonica) and Kayabyeo(J/Indica) rice were investigated. Water uptake and volume increase rates of milled rice were increased as a function of soaking temperature$(4^{\circ}C{\sim}30^{\circ}C)$. The rate of volume increase of milled rice was greater than that of weight increase, which was more pronounced at low soaking temperature. The soaking of milled rice prior to cooking had a definite effect on the degree of gelatinization. The soaked milled rice was more easily gelatinized than unseated one. The water uptake rate, volume increase rate, degree of gelatinization and cooking rate of milled rice were faster in Kayabyeo than Chunmabyeo.

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.727-736
• /
• 2010

The purpose of this research was to compare the physicochemical compositions and morphological properties of five varieties of rice flours (RR, RGD, RSGD, RWDG, RWGD). RR was raw milled rice without washing, RGD was raw rice flour without soaking, RSGD was raw milled rice flour with 0 hr of soaking, RWDG was raw rice flour with 8 hr of soaking and grinding after drying, and RWGD was raw rice flour with 8hr of soaking and drying after grinding. The protein and lipid contents of wet milling rice flour (RSGD, RWDG, RWGD) were significantly lower than those of dry milling rice flour (RR, RGD). L and a values were significantly increased in wet milling rice flour, and b value was significantly increased in dry milling rice flour. Scanning electron microscopy (SEM) showed that RWDG and RWGD were distributed as separated fine particles in rice flours. The WBC of RWDG and RWGD were higher than those of other rice flours. Solubility was significantly increased according to the temperature, and swelling power of RWDG was higher than that of other rice flours at 50 and $60^{\circ}C$. Using RVA, the initial pasting temperature and setback of RWDG were lower and the peak viscosities of RSGD and RWDG were higher than those of other rice flours. Using a mixograph, peak times were not significantly different among the groups, wheras peak heights were significantly decreased in RSGD, RWDG, and RWGD. The peak width of RWGD was lower than those of other rice flours. Based on these findings, RWDG flour was less damaged, and had a lower setback and pasting temperature, which makes it an appropriate rice flour for commercial mass production.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.381-387
• /
• 2009

Enhancing enzymatic saccharification of corn stover by aqueous ammonia soaking pretreatment was investigated on chemical compositional changes and enzymatic hydrolysis characteristics. At three different levels of aqueous ammonia soaking temperature and time ($140^{\circ}C$-1 h, $90^{\circ}C$-16 h and $50^{\circ}C$-6 days), higher temperature and shorter treatment time led to more xylan and lignin removal based on overall composition analysis and carbohydrate compositional analysis. More xylan and lignin removal in higher temperature treatment led to higher enzymatic saccharification of cellulose and xylan to monosaccharide by commercial cellulase mixtures (Celluclast 1.5L and Novozym 342 from Novozyme, Denmark).