• Journal of Oral Medicine and Pain
• /
• v.33 no.3
• /
• pp.247-256
• /
• 2008

The belief that stress leads to illness has a long history. A number of the orofacial disease are also closely associated with stress. Despite research in the relationship of stress and the orofacial diseases leading to statistically significant correlations, the pathology remains vague. In the present study, the expression of clusterin, a stress protein responsible for antiapoptosis and cytoprotection, under restraint stress condition was observed in the submandibular gland, one of the major salivary glands. Sprague-Dawley rats were divided into 2 groups: normal group and restraint stress group. The rats of restraint stress group were placed in the stress cages and then sacrificed at day 0, 3 and 5 day of the experiment. After that, the submandibular glands of all the rats were excised immediately. The levels of clusterin proteins and mRNA in the tissues were measured by immunohistochemistry and Northern blot analyses, respectively. The results were as follows: 1. In the immunohistochemistry, clusterin protein was detected only immediately after the application of restraint stress. 2. In the restraint stress group, at day 3 and 5, histologically apoptosis was induced with karyorrhectic and pyknotic changes. 3. By the restraint stress, acinic cells were destructed earlier than ductal cells. 4. In the Northern blot, mRNA of clusterin was expressed only immediately after the application of restraint stress. The overall results suggest that as an early response to stress, clusterin is expressed in the glands to protect the glandular cells from the stress. But if stress is so strong and prolonged that it can exceed the stress adaptability of the cells, then the cells may undergo apoptosis instead of producing clusterin. An Epidemiologic Study of Symptoms of Temporomandibular Disorders in Korean College Students.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.895-906
• /
• 2015

This study was carried out to the structure of plant community from Sinseongam to Jungdaesa in Odaesan National Park, furthermore, it seeks to curate the basic data for planning of the Abies holophylla's forest management in Odaesan National Park. In order to identify the current ecological environment, this study explored the actual vegetation as primary research and set to twenty plots(i.e. $400m^2$) for analysing detailed structure of plant communities. The research methodology was qualitative analysis, therefore it used TWINSPAN and DCA analysis tools. Especially, TWINSPAN performed well in several comparisons of classification techniques, DCA is one of the ordination technique showed that the plant communities. The plant community was analysed classification and ordination by TWINSPAN and DCA, moreover it was analysed the structure of plant community such as importance percentage of woody species, DBH class distribution, the index of diversity and rate of sample tree growth. The main vegetation was A. holophylla-Quercus mongolica forest and Deciduous broad-leaved forest in the communities where located in low altitude and valley, whereas main vegetation where located in high altitude and slope was Q. mongolica forest. The research site's plant communities were classified four groups. In all of communities, A. holophylla was dominant species in main canopy layer, furthermore, the three communities (community I, II, III) are growing up next generation of A. holophylla excluding community IV. The communities (community I, II, III) can be sustained current status which dominates the A. holophylla communities, simultaneously, there might be expanded the Deciduous broad-leaved communities by Carpinus cordata, Betula schmidtii and so on. While, it showed that the community IV tended to be weaken the forces of A. holophylla, therefore the community IV can be transferred to C. cordata-Deciduous broad-leaved communities in the future. The age of sample trees was 79~128(i.e. A. holophylla), 75~87(i.e. Pinus koraiensis) and 190 years(i.e. Ulmus davidiana var. japonica). The index of Shannon's Species diversity (H') were ranged from 0.3889 to 1.3332 in the communities.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2013

The aim of this work is to verify the self-quality assurances in medical institutions in Korea through the external audits by the group of experts and have a mutual discussion of the systematic problems. In order to validate the external audits 30 of 80 medical institutions across the nation were picked out considering the regional distribution and the final 25 institutions applied voluntarily to take part in this work. The basic rules were setup that any information of the participants be kept secrete and the measurements be performed with the dosimetry system already verified through intercomparision. The outputs for 2 or more photon beams, the accuracy of gantry rotation and collimator rotation and the poistional accuracy of MLC movement were measured. The findings for the output measurement showed the differences of -0.8%~4.5%, -0.79%~3.01%, and -0.7%~0.07% with respect to that of the verified dosimetry system for the 6MV, 10MV, and 15MV, respectively. For the reference absorbed dose 8 (16%) of 50 photon beams in 25 medical institutions differed 2.0% or greater from the reference value. The coincidences of Field size with x-ray beam and radiation isocenters of Gantry roration and collimator rotation gave the results of within ${\pm}2$ mm for every institute except 2 institutions. The positional accuracy of MLC movement agreed to within ${\pm}1$ mm for every institute. For the beam qualities of 6 MV photon beams kQ values showed the distribution within 0.4% between maximum and minimum. For the protocols 21 institutions (84%) used absorbed dose to water based protocol while 4 insitutions (16%) used air kerma based one. 22 institutions employed the SSD technique while 3 institutions did the SAD one. External audit plays an important role in discovering the systematic problems of self-performing Quality Assurances and having in depth discussion for mutual complementation. Training experts of international level as well as national support system are required so that both the group of experts of medical physicists and government laboratory could perform together periodical and constant external audits.

• 기호학연구
• /
• no.57
• /
• pp.121-153
• /
• 2018

In terms of the story told, we see that Oh! Soojung(Virgin Stripped Bare by Her Bachelors) is a film of the ideololgy of masculinity. However, from the point of view of the manner of presenting story, Oh! Soojung is a film that aims to devalue this ideology. How will it be possible? This is the principle of the irony that the speaker, by saying P, wants to make Q listen that devalues and contradicts P. Our study is tempted to explain the process of interpreting the irony in the film. The ideology of the film occurs when the presupposed contents have become the subject. For example Cendrion who tells a story of a girl married to a prince presupposes that the girl, Cendrion, is obedient. The subject of this story is that the presupposition: /the girls who want to be happy must be obedient/, which represents the ideology of masculinity. Presupposed content thus imposes on the public a collective and conservative value, as its enunciator belongs to the collective voice. Since ironisation occurs when the utterance itself is annulled, one must also deny or cancel the story told of Oh! Soojng: /Jeahun who is rich and Soojung who is obedient and virgin have become lovers/. Since there is no semantic mark within the utterance, irony is a voice that comes from without; this is how we understand irony in a purely pragmatic way. The outer voices are two things: the way to build the story: question of focusing, ocularization and auricularization, and the way to present the story: question the order, the frequency or the plot. Our study is focused on the question of frequency at Oh! Soojung which has a repetition structure in which the memory of Jeahun and that of Soojung are represented one after the other. Since the memories of two characters are not identical, the repetition is accompanied by differences. The differences at first allow the public to build their own story from the di?g?se of the film and then make the audience fall into confusion where we can not be certain of what we see and know in the di?g?se of the film, and finally make their knowledge questionable. About repetition, so that it can have validity in terms of the informativeness of the utterance, it must deny the existence of the previous repetition. This is how repetition cancels itself and consequently the utterance. We see that the irony of Oh! Soojung occurs by repetition with differences that cancels the story of the film.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.79-89
• /
• 2009

Naphthalene is a volatile, hydrophobic, and possibly carcinogenic compound that is known to have a severe detrimental effect to aquatic ecosystem. Our research examined the effects of various operating conditions (temperature, pH, initial concentration, and frequency and type of ultrasound) on the sonochemical degradation of naphthalene and OH radical production. The MDL (Method detection limit) determined by LC/FLD (1200 series, Agilient) using C-18 reversed column is measured up to 0.01 ppm. Naphthalene vapor produced from ultrasound irradiation was detected under 0.05 ppm. Comparison of naphthalene sonodegradion efficiency tested under open and closed reactor cover fell within less than 1% of difference. Increasing the reaction temperature from $15^{\circ}C$ to $40^{\circ}C$ resulted in reduction of naphthalene degradation efficiency ($15^{\circ}C$: 95% ${\rightarrow}$ $40^{\circ}C$: 85%), and altering pH from 12 to 3 increased the effect (pH 12: 84% ${\rightarrow}$pH 3: 95.6%). Pseudo first-order constants ($k_1$) of sonodegradation of naphthalene decreased as initial concentration of naphthalene increased (2.5 ppm: $27.3{\times}10^{-3}\;min^{-3}\;{\rightarrow}$ 10 ppm : $19.3{\times}10^{-3}\;min^{-3}$). Degradation efficiency of 2.5 ppm of naphthalene subjected to 28 kHz of ultrasonic irradiation was found to be 1.46 times as much as when exposed under 132 kHz (132 kHz: 56%, 28 kHz: 82.7%). Additionally, its $k_1$ constant was increased by 2.3 times (132 kHz: $2.4{\times}10^{-3}\;min^{-1}$, 28 kHz: $5.0{\times}10^{-3}\;min^{-1}$). $H_2O_2$ concentration measured 10 minutes after the exposure to 132 kHz of ultrasound, when compared with the measurement under frequency of 28 kHz, was 7.2 times as much. The concentration measured after 90 minutes, however, showed the difference of only 10%. (concentration of $H_2O_2$ under 28 kHz being 1.1 times greater than that under 132 kHz.) The $H_2O_2$ concentration resulting from 2.5 ppm naphthalene after 90 minutes of sonication at 24 kHz and 132 kHz were lower by 0.05 and 0.1 ppm, respectively, than the concentration measured from the irradiated M.Q. water (no naphthalene added.) Degradation efficiency of horn type (24 kHz) and bath type (28 kHz) ultrasound was found to be 87% and 82.7%, respectively, and $k_1$ was calculated into $22.8{\times}10^{-3}\;min^{-1}$ and $18.7{\times}10^{-3}\;min^{-1}$ respectively. Using the multi- frequency and mixed type of ultrasound system (28 kHz bath type + 24 kHz horn type) simultaneously resulted in combined efficiency of 88.1%, while $H_2O_2$ concentration increased 3.5 times (28 kHz + 24 kHz: 2.37 ppm, 24 kHz: 0.7 ppm.) Therefore, the multi-frequency and mixed type of ultrasound system procedure might be most effectively used for removing the substances that are easily oxidized by the OH radical.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.