• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.143-148
• /
• 2024

Traffic congestion has caused issues in various forms such as the environment and economy. Recently, an intelligent transport system (ITS) using artificial intelligence (AI) has been focused so as to alleviate the traffic congestion problem. In this paper, we propose a reinforcement learning-based traffic signal control algorithm that can smooth the flow of traffic while reducing discomfort levels of drivers and pedestrians. By applying the proposed algorithm, it was confirmed that the discomfort levels of drivers and pedestrians can be significantly reduced compared to the existing fixed signal control system, and that the performance gap increases as the number of roads at the intersection increases.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.101-112
• /
• 2016

This study investigated the removal of Sr, which was one of the high radioactive nuclides, by adsorption with Barium (Ba) impregnated 4A zeolite (BaA) from high-radioactive seawater waste (HSW). Adsorption of Sr by BaA (BaA-Sr), in the impregnated Ba concentration of above 20.2wt%, was decreased by increasing the impregnated Ba concentration, and the impregnated Ba concentration was suitable at 20.2wt%. The BaA-Sr adsorption was added to the co-precipitation of Sr with $BaSO_4$ precipitation in the adsorption of Sr by 4A (4A-Sr) within BaA. Thus, it was possible to remove Sr more than 99% at m/V (adsorbent weight/solution volume)=5 g/L for BaA and m/V >20 g/L for 4A, respectively, in the Sr concentration of less than 0.2 mg/L (actual concentration level of Sr in HSW). It shows that BaA-Sr adsorption is better than 4A-Sr adsorption in for the removal capacity of Sr per unit gram of adsorbent, and the reduction of the secondary solid waste generation (spent adsorbent etc.). Also, BaA-Sr adsorption was more excellent removal capacity of Sr in the seawater waste than distilled water. Therefore, it seems to be effective for the direct removal of Sr from HSW. On the other hand, the adsorption of Cs by BaA (BaA-Cs) was mainly performed by 4A within BaA. Accordingly, it seems to be little effect of impregnated Ba into BaA. Meanwhile, BaA-Sr adsorption kinetics could be expressed the pseudo-second order rate equation. By increasing the initial Sr concentrations and the ratios of V/m, the adsorption rate constants ($k_2$) were decreased, but the equilibrium adsorption capacities ($q_e$) were increasing. However, with increasing the temperature of solution, $k_2$ was conversely increased, and $q_e$ was decreased. The activation energy of BaA-Sr adsorption was 38 kJ/mol. Thus, the chemical adsorption seems to be dominant rather than physical adsorption, although it is not a chemisorption with strong bonding form.

• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.163-163
• /
• 2003

The study area, Kwangneung Experiment Forest (KEF) is located on the west-central portion of Korean peninsula and belongs to a cool-temperate broadleaved forest zone. At the old-growth deciduous forest near Soribong-peak (533.1m) in KEF, we have established a permanent plot and a flux tower, and the site was registered as a KLTER site and also a KoFlux site. In this study, we aimed to present basic ecological characteristics and synthetic data of carbon budgets and flows, and some monitoring data which are essential for providing important parameters and validation data for the forest dynamics models or biogeochemical dynamics models to predict or interpolate spatially the changes in forest ecosystem structure and function. We made a stemmap of trees in 1 ha plot and analyzed forest stand structure and physical and chemical soil characteristics, and estimated carbon budgets by forest components (tree biomass, soils, litter and so on). Dominant tree species were Quercus serrata and Carpinus laxiflora, and accompanied by Q. aliena, Carpinus cordata, and so on. As a result of a field survey of the plot, density of the trees larger than 2cm in DBH was 1,473 trees per ha, total biomass 261.2 tons/ha, and basal area 28.0 m2/ha. Parent rock type is granite gneiss. Soil type is brown forest soil (alfisols in USDA system), and the depth is from 38 to 66cm. Soil texture is loam or sandy loam, and its pH was from 4.2 to 5.0 in the surface layer, and from 4.8 to 5.2 in the subsurface layer. Seasonal changes in LAI were measured by hemispherical photography at the l.2m height, and the maximum was 3.65. And the spatial distributions of volumetric soil moisture contents and LAIs of the plot were measured. Litterfall was collected in circular littertraps (collecting area： 0.25m2) and mass loss rates and nutrient release patterns in decomposing litter were estimated using the litterbag technique employing 30cm30cm nylon bags with l.5mm mesh size. Total annual litterfall was 5,627 kg/ha/year and leaf litter accounted for 61% of the litterfall. The leaf litter quantity was highest in Quercus serrata, followed by Carpinus laxiflora and C. cordata, etc. Mass loss from decomposing leaf litter was more rapid in C. laxiflora and C. cordata than in Q. serrata litter. About 77% of C. laxiflora and 84% of C. cordata litter disappeared, while about 48% in Q. serrata litter lost over two years. The carbon pool in living tree biomass including below ground biomass was 136 tons C/ha, and 5.6 tons C/ha is stored in the litter layer, and about 92.0 tons C/ha in the soil to the 30cm in depth. Totally more than about 233.6 tons C/ha was stored in DK site. And then we have drawn a schematic diagram of carbon budgets and flows in each compartment of the KEF site.

• Journal of fish pathology
• /
• v.25 no.3
• /
• pp.199-210
• /
• 2012

It can be hypothesized that dietary fatty acids can modulate immune responses in fish by inducing apoptosis of immune cells since dietary polyunsaturated fatty acid (PUFA) increase apoptosis by oxygen radicals generated by peroxidation. Thus we examined the effects of deferent dietary lipid sources such as squid liver oil (FO), linseed oil (LO) and soybean oil (SO) on oxidation (Cytochrome C oxidase; COS), apoptosis (TNF-${\alpha}$ Scinderin like) and immune (IL-$1{\beta}$ and NKEF) gene expression in the main immune organ (head kidney) in olive flounder (Paralichthys olivaceus) by Q-PCR analysis after feeding diets containing each oil (5%) for 15 weeks. Linseed oil and soybean oil were chosen to compare n-3 or n-6 enriched vegetable oils, respectively. Consequently, COS, TNF-${\alpha}$ and Scinderin like gene expression was increased in SO group, indicating the induction of oxidation and apoptosis. Meanwhile, no significant difference was found in immune gene expression. In conclusion vegetable oils containing n-3 PUFA like linseed oil seems to be more suitable lipid source than soybean oil for replacement of fish oil in flounder since n-6 PUFA in SO leads to activation of apoptosis pathways within the cellular damage in head kidney.

• CELLMED
• /
• v.8 no.4
• /
• pp.21.1-21.2
• /
• 2018

The aim of this article is to argue that repeated singing helps to feel 'misery loves company.' Folksong is popular music in the past. Korean folk songs have almost repetitive chorus. The repetitive refrain is made easy for everyone to follow. So, people become comrades who share the chorus together. Repetitive music makes people more intimate and more intimate. So, people feel that they share thoughts and feelings with music. It gives me energy to never give in to destiny. So, they encourage each other to be worth living. They sing together and sympathize and comfort each other's pain. 'Hook song' is the most popular form in these days in Korean music. The form of K-pop (Korean pop), which is gaining popularity worldwide, has many repetitions and concentration of melody. BTS (Bang Tan Sonyundan, Boyband) also tells teens around the world through repetitive melodies that "Let's share our joy and sorrow." This is the highest value of music therapy. BTS is a Korean boy band that has gained a worldwide reputation. Recently, their songs are affecting teenagers all over the world. In this way, the author thinks that the repetition of folk songs was reborn as a 'Hook song' and the repetitive form of music is a good way to give support to anyone. The author thinks this is best accomplished by singing 'misery loves company.'

• Korean Journal of Environment and Ecology
• /
• v.6 no.2
• /
• pp.168-179
• /
• 1993

Use impacts on environmental deteriorations of trail were studied on the three major trails of Sobaeksan National Park in 1992. The entire width and bare width of trail as the trail condition were significantly greater on the more heavily used trail. Maximum depth of trail was not so great in spite of steeper grade of trail in comparison with the other National Parks. Percentages of deepening. rock-exposed. diverged points as the deterioration types of trail which were surveyed at the total of 105 points were high and trail conditions were significantly different from those of non-deteriorated points. On the Ridge trail. the damaged area more severe than Class 4 reaches about 10,335$m^2$ and the deterioration is accelerated. The dominant trees of the the upper layer in trail edge vegetation are changed from Q. mongolica. Aar mono to Q. mongolica for Huibang trail. and from Pinus densiflora. Q. mongolica to P. densiflora and to Q. mongolica for Biro trail as altitude increases. Rhododendron schlippenbachii. Weigelu subsessilis. Salix hulteni. Rubus crataeglfolius were classified for tolerant species and R. coreanus. Vaccinium koreanum for intolerant species to use impacts. Highly competetive species on the Ridge trail were grouped R. schlippenbachii. W. subsessilis. Rubus crataegifolius and Symplocos chinensis for. pilosa.

• Korean Institute of Interior Design Journal
• /
• v.23 no.2
• /
• pp.40-50
• /
• 2014

The purpose of this study was to investigate how brand identity expressional elements in cosmetic road shops' facades would affect the brand awareness of consumers while extracting those brand identity expressional elements observed in the facades of the cosmetic road shops. In order to achieve the research goal, the study used Q methodology, a method to measure subjectivity. The results have been summarized as follows. (1) The elements to express the brand identity found in the facades of the cosmetic road shops were observed to be two-dimensional expressional elements, and they should include a symbol, a logo, a signboard, materials to express an image (products, models) and a brand color. As for the three-dimensional expressional elements, they were a building (form, materials, pattern), decorations (lean-to roof, canopy, sculptures, lighting, screen) and a display window (focusing on products, visuality or the inside of a shop). (2) The findings of the analyses on the brand awareness using Q methodology have been presented as follows. (1) When multiple identity expressional elements which would be associated with each other are used, the brand awareness gets increased relatively efficiently. (2) In case of men, they would perceive a brand more easily through those formative expressional elements such as a form of a building. (3) In case of women, they would perceive a brand more conveniently through those visual expressional elements such as a brand color. (3) In conclusion, the study figured out that, among the brand identity expressional elements, the one which would influence the brand awareness most would be (1) the brand color, followed by (2) the building-form, (3) the lean-to roof, (4) the display window and (5) the logo. Based upon what has been learned so far, the study confirmed that when it comes to securing the brand awareness in the market, cosmetic companies should, first, realize how important it is to make good use of the two-dimensional (visual) expressional element, the brand color, and the three-dimensional expressional element, the form of the building, together before they even try to design facades of their shops on the streets.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.432-439
• /
• 2020

Brake judder has been identified in some operating military units of Korean Light Tactical Vehicles(KLTV) with In-board brake systems to improve braking performance. Severe vibration generated while driving the vehicle may reduce the KLTV's driving stability and further lead to accidents. For the prevention of this, this study analyzes the root cause through the failure analysis on the vehicles with the brake judder identified. Furthermore, the improvement factor was derived by identifying a vibration transmission path by analyzing the vibration transmission mechanism. The study analysis confirmed that the vibration of the frame during braking in the tactical vehicle is a cold judder phenomenon, which is caused by an increase in disk thickness variation due to rust and foreign substances under excessive brake disc's run-out. In addition, it was confirmed that such vibration can be reduced by improving the mounting structure. So, an improvement method for each factor was suggested and its effectiveness was verified by comparison test. Finally, it is expected that the improvement plans derived through this study can be used in the development of a next military vehicle.

• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.37-46
• /
• 2011

This study was written about the actual vegetation map by researchig current vegetation and on-site vegetation in the Deogyusan National Park. Current vegetation patterns were classified into 42 types according to correlation. And Quercus mongolica forest was 39.08% out of the total forest vegetation, and was dispersed the most widely. Next were Q. variabilis, Pinus densiflora, and Fraxinus mandshurica forests in order, so that the forests of Deogyusan are different from those of another national parks in that F. mandshurica forest is more widely dispersed. Forest vegetation of Deogyusan national park is broadly classified into three types: deciduous broad-leaved forest (Quercus forest and valley forest), coniferous forest(P. densiflora forest), and sub-alpine forest(Taxus cuspidata forest, Abies koreana, Rhododendron schlippenbachii shrub-forest, and prairie). Distribution of DBH of Q. mongolica and Q. variabillis had a higher frequency of young individuals and middle individuals, Q. serrata and Carpinus laxiflora had a higher frequency of young individuals, suggesting a continuous domination of these species over the other species for the time being. In contrast, F. mandshurica appeared limited to the valley of the sheet and a higher frequency of young individuals, suggesting a continuous domination of these species the development of a climax forest terrain. P. densiflora, Betula davurica, Cornus controversa, B. costata, A. koreana and T. cuspidata had a formality distribution, suggesting a continuous domination of these species over the other species for the time being.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.1
• /
• pp.4575-4591
• /
• 1978

In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %