• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.397-400
• /
• 2009

This paper describes ASIC design of Multimedia application SoC platform based RISC processor with BTB(Branch Target Buffer). For performance enhancement of platform, we use a simple branch prediction scheme, BTB structure, that stores a target address for branch instruction to remove pipeline harzard. Also, the platform includes a number of peripheral such as VGA controller, AC97 controller, UART controller, SRAM interface and Debug interface. The platform is designed and verified on a Xilinx VERTEX-4 FPGA using a number of test programs for functional tests and timing constraints. Finally, the platform is implemented into a single ASIC chip which can be operated at 100MHz clock frequency using the Chartered 0.18um process. As a result of performance estimation, the proposed platform shows about 5~9% performance improvement in comparison with the previous SoC Platform.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.205.2-205.2
• /
• 2014

The effects of ion beam mixing of a SiC film coated on super alloys (hastelloy X substrates) were studied, aiming at developing highly sustainable materials at above $900^{\circ}C$ in decomposed sulfuric acid gas (SO2/SO3/H2O) channels of a process heat exchanger. The bonding between two dissimilar materials is often problematic, particularly in coating metals with a ceramics protective layer. A strong bonding between SiC and hastelloy X was achieved by mixing the atoms at the interface by an ion-beam: The film was not peeled-off at ${\geq}900^{\circ}C$, confirming excellent adhesion, although the thermal expansion coefficient of hastelloy X is about three times higher than that of SiC. Instead, the SiC film was cracked along the grain boundary of the substrate at above $700^{\circ}C$. At ${\geq}900^{\circ}C$, the film was crystallized forming islands on the substrate so that a considerable part of the substrate surface could be exposed to the corrosive environment. To cover the exposed areas and cracks multiple coating/IBM processes have been developed. An immersion corrosion test in 80% sulfuric acid at $300^{\circ}C$ for 100 h showed that the weight retain rate was gradually increased when increasing the processing time.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.133-144
• /
• 1990

The purpose of this study is to investigate the absorbance of the Shikonin, one of the major purple pigments, and the stability against the effect of light, $O_2$, and temperature. The effect of mordant and mordanting condition to color and color-fastness is compared and analysed through the color-fastness-test, color-difference value-test, and IR-test. The results were as follows; 1. The absorbance of Shikonin was examinated through 6 kinds of solutions and distilled water. Shikonin was absorbed by solutions rather easily than distilled water. 2. The light effect to Shikonin indicated that the solution with the light was more stable than that without it. 3. The effect of $O_2$ to Shikonin showed that the solution with the $O_2$ was more stable that without it $O_2$. 4. Shikonin -methyl alcohol solution was stable in $25^{\circ}C$. It was unstable in $60^{\circ}C$ and $100^{\circ}C$ with lowered absorbance and changed colors. 5. Color-fastness test to silk and cotton indicated washing color-fastness and perspiration color-fastness was more than 3 grade. But the light color-fastness and crocking color-fastness was low. 6. The comparison between non -colored sample and colored-sample showed the latter was better in fastness. 7. Mordant as $Alk(SO_4)_2{\cdot}24H_2O$ and $AlCl_3{\cdot}6H_2O$ was better than anything else in fastness. 8. Color-difference value-test indicated that the mordant which had the jade green color, the original purple pigment color, was the best in use. 9. The best way to extract the original purple pigment color was in $25^{\circ}C$, because extracted dyeing solution by Soxhlet had the bluish color.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.831-835
• /
• 2008

Recently, the use of C.S.G is gradually increasing as the construction material for dam, road, revetment and so on. The strength characteristics of C.S.G is affected by various influence factors such as specimen size, maximum grain size and water contents. Therefore, When designing and constructing the C.S.G structure, it is very important for us to understand the nature of used materials well and to test it's quality. Commonly, C.S.G strength test is used the cylinders specimen size of $15{\times}30$ at KS F2405. But, the specimen size extracted from the field structure is not regular. This paper aims at offering the experimental data about the compressive strength and elasticity modulus by change of the specimen size for the effective quality control of the C.S.G structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.34-38
• /
• 2005

This paper describes the result of load test of a bogie frame. The purpose of test is to evaluate the safety which bogie frame shall be considered fully sufficient rigidity so as to satisfy proper system function under maximum load. Bogie system consist of the bogie frame, suspensions, wheel-sets, a brake system and a transmission system. Among these component, the bogie frame is most significant component subjected to the vehicle and passenger loads. The evaluation method is used the JIS E 4207 specifications throughout the static load test. The test results have shown the bogie frame to be safe and stable under design load conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.49-54
• /
• 2005

This paper describes the result of structure analysis and load test of body structure. The purpose of the analysis and test is to evaluate an safety which body structure shall be considered fully sufficient rigidity so as to satisfy proper system function under maximum load and operating condition. Material of body structure applied an aluminum alloy. Body structure consist of side frame, under frame, roof frame, end frame. Both FEM analysis and load test are based on 'Performance Test Standard for Electrical Multiple Unit, noticed by Ministry of Construction & Transportation, in 2000' and reference code is JIS E 7105. The test results have been very safety and stable fer design load conditions.

• Carbon letters
• /
• v.4 no.1
• /
• pp.24-30
• /
• 2003

In this study, densified 4D carbon/carbon composites were made from carbon fiber and coal tar pitch through the process of pressure impregnation and carbonization and then followed by carbonization and graphitization. To improve the oxidative resistance of the prepared carbon/carbon composites, the surface of carbon/carbon composites was coated on SiC by the pack cementation method. The SiC coated layer was created by depending on the constitution of pack powder, and reaction time of pack-cementation. The morpology of crystalline and texture of these SiC coated carbon/carbon composites were investigated by XRD, SEM/EDS observation. So the coating mechanism of pack-cementation process was proposed. The oxidative res istance were observed through the air oxidation test, and then the optimal condition of pack cementation was found by them. Besides, the oxidative mechanism of SiC formed was proposed through the observation of SiC coated surface, which was undergone by oxidation test.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.6
• /
• pp.278-285
• /
• 2006

Coating mixtures of the resin B-H for the application to the desulfurization system of power plant were coated on carbon steels and cured at the temperature of $65^{\circ}C{\sim}80^{\circ}C$. After being contacted with 70wt% $H_2SO_4$ solution of $100^{\circ}C\;and\;120^{\circ}C$ for several hours, their composition, Vicker's hardness and microstructures by SEM were examined. Corrosion resistance of the coating mixtures to $H_2SO_4$ solution was related to the content of $SO_3$ in the coated specimens after corrosion test. The lower curing temperature and the shorter curing time the coated specimens went through, the higher corrosion resistance to acid they showed, but the more cracks were developed at higher temperature. It was realized that the corrosion resistance to sulfaric acid solution was increased on the condition of curing temperature above $65^{\circ}C$ and curing time above 12 hours at least.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.229-236
• /
• 2005

Testing time and power consumption during testing System-On-a-Chip (SOC) are becoming increasingly important as the IP core increases in a SOC. We present a new algorithm to reduce the scan-in power and test data volume using the modified scan latch reordering. We apply scan latch reordering technique for minimizing the hamming distance in scan vectors. Also, during scan latch reordering, the don't care inputs in scan vectors are assigned for low power and high compression. Experimental results for ISCAS 89 benchmark circuits show that reduced test data and low power scan testing can be achieved in all cases.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.189-191
• /
• 2008

본 논문에서는 스캔 체인의 레이아웃 거리를 고려한 효율적인 Test Wrapper 설계 방식을 제안한다. SoC내의 스캔체인들을 테스트 하기 위해서는 외부 TAM line에 각 스캔체인들을 할당해야 한다. IP 내에 존재하는 스캔체인들은 스캔체인간 레이아웃 거리를 갖게 되며 이 거리가 클럭주기를 넘어가는 경우 체인의 타이밍 위반(Timing violation)이 발생될 수 있다. 본 논문에서는 타이밍 위반이 발생하지 않도록 체인간 거리를 고려하여 스캔체인을 할당하는 새로운 test wrapper 설계 방식을 제안하였다.