• Journal of the Korean Society of Food Culture
• /
• v.25 no.2
• /
• pp.207-215
• /
• 2010

The purpose of this study was to investigate the microbiological characteristics and antioxidant activity of tomato sauce in terms of the variety of herbs that have been widely used in Western cuisine. As storage time increases, the number of total microbes changes, but the bacteria count was in the range of $1.0{\times}10^1-2.1{\times}10^2$, which did not increase much over 60 days of storage. The reason seems to be that the amount of heat treatment undergone by this type of sauce type, and its acidity make for difficult conditions for microbes to live. Yeast and mold measurements showed that yeast and mold were not detected for up to 30 days of storage in the tomato sauce with various types and amounts of added herbs. After 45 and 60 days, the yeast and mold count was in the range of $1.0{\times}10^1-8.5{\times}10^1$, and the same in the control. Measurements of phenolic compounds in 60 days of storage showed that tomato sauce with different types and amounts of added herbs had the lowest amounts relative to the control for all storage periods. The more herbs that were added, the higher the phenolic compounds resulted. As storage times increase, the phenolic compounds showed a tendency to decline. The DPPH radical scavenging effects of the tomato sauce herbs added showed a tendency to increase antioxidant activity when more herbs were added. The microbiology results of the storage test of tomato sauce with added herbs showed that the amount of microorganisms in tomato sauce with added herbs did not increase much in 60 days of storage at $4^{\circ}C$. The amount of microorganisms was small, so tomato sauce with added herbs can be used for 2 months with refrigeration.

• Transactions of Materials Processing
• /
• v.32 no.6
• /
• pp.311-320
• /
• 2023

Recently, lightweight of automotive parts has been required to solve environmental problems caused by global warming. Accordingly, research and development are proceeded on manufacturing of parts using aluminum that can replace steel for lightweight of the automotive parts. In addition, high strength aluminum can be applied to body parts in order to meet both requirements of lightening and improving crash safety of vehicle. In this study, hot blow forming of roof side rail is employed to manufacturing of the automotive parts with high strength aluminum tube. In hot blow forming, longer forming times and excessive thinning can be occurred as compared with conventional manufacturing processes. So optimization of process conditions is required to prevent excessive thinning and to uniformize thickness distribution with fast forming time. Mechanical properties of high strength aluminum are obtained from tensile test at high temperature. These properties are used for finite element(FE) analysis to investigate the effect of strain rate on thinning and thickness distribution. Variation of thickness was firstly investigated from the result of FE analysis according to tube diameter, where the shapes at cross section of roof side rail are compared with allowable dimensional tolerance. Effective tube diameter is determined when fracture and wrinkle are not occurred during hot blow forming. Also FE analysis with various pressure-time profiles is performed to investigate the their effects on thinning and thickness distribution which is quantitatively verified with thinning factor. As a results, optimal process conditions can be determined for the manufacturing of roof side rail using high strength aluminum.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.2
• /
• pp.61-71
• /
• 2006

An MP3 encoder chip has been designed and fabricated with the hardware and software co-design concepts. In the aspect of the software. the calculation cycles of the distortion control loop. which requires most of the calculation cycles in MP3 encoding procedure. have been reduced to $67\%$ of the original algorithm through the 'scale factor Pre-calculation'. By using a floating Point 32 bit DSP core and designing the FFT block with the hardware. we can get the additional reduction of the calculation cycles in addition to the software optimization. The designed chip has been verified using HW emulation and fabricated via 0.25um CMOS technology The fabricated chip has the size of $6.2{\time}6.2mm^2$ and operates normally on the test board in the qualitative and quantitative aspect.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.366-377
• /
• 2016

Water use efficiency (WUE) is considered as an important ecological indicator which may provide information on the process-structure relationships associated with energy-matter-information flows in ecosystem. The WUE at ecosystem-level can be defined as the ratio of gross primary productivity (GPP) to evapotranspiration (ET). In this study, KoFlux's long-term (2007-2015) eddy covariance measurements of $CO_2$ and water vapor fluxes were used to examine the WUE of needle fir plantation in Korea National Arboretum. Our objective is to ascertain the seasonality and inter-annual variability in WUE of this needle fir plantation so that the results may be assimilated into the development of a holistic ecological indicator for resilience assessment. Our results show that the WUE of needle fir plantation is characterized by a concave seasonal pattern with a minimum ($1.8-3.3g\;C{\cdot}(kg\;H_2O)^{-1}$) in August and a maximum ($5.1-11.4g\;C{\cdot}(kg\;H_2O)^{-1}$) in February. During the growing season (April to October), WUE was on average $3.5{\pm}0.3g\;C\;(kg\;H_2O)^{-1}$. During the dormant seasons (November to March), WUE showed more variations with a mean of $7.4{\pm}1.0g\;C{\cdot}(kg\;H_2O)^{-1}$. These values are in the upper ranges of WUE reported in the literature for coniferous forests in temperate zone. Although the growing season was defined as the period from April to October, the actual length of the growing season (GSL) varied each year and its variation explained 62% of the inter-annual variability of the growing season WUE. This is the first study to quantify long-term changes in ecosystem-level WUE in Korea and the results can be used to test models, remote-sensing algorithms and resilience of forest ecosystem.

• Asia Marketing Journal
• /
• v.13 no.4
• /
• pp.29-54
• /
• 2012

Recently, as film has been admitted as the artistic merit and higher value-added business, the past studies on film have been lively carried on various fields. Especially, the film business is thought to be value-added business and has explored the causes of influencing spectators. However, there are no researches enough to explain what induces the choice and diffusion of the film. The film is not only hedonic products but also typical example of experiential products. So how to process film formation plays important roles in explaining the procedures of forming preference on the film and the movies spread more widely. But the great part of study of films has been concentrated on exploring hedonic factors of influencing spectator's choice. Until now there is not enough study for the relationship between experiential information processing and film preference. To explain film's preference, our study focuses on preference fluency and processing fluency that can provide an insight for our question about the relationship. In this article, to explain the procedures of processing experiential information and forming preference on the film, our study focuses on finding the relationship between film's processing fluency and film's preference fluency and explores the factors that affect film's processing fluency. To achieve the goal of this study, we distinguish factors of film's conceptual fluency from factors of film's perceptual fluency and explore the paths from the factors to film's preference fluency. The factors which have effects on perceptual fluency are hypothesized to be distinction of image expression, distinction of sound expression, correspondence between actors' image and their role. The factors which have effect on conceptual fluency are supposed to be well-organized story, suitability of lines expression. The experiments in which students were sampled at 'C' university were conducted in 2010 (december). Data collection was proceeded through questionnaires. We test the hypothesized model by using structural equation modeling(Amos 17.0). The fit indices for the model are as follows : x²=416.266(df=213, p=0.00), GFI=0.855, AGFI=0.812, RMSEA =0.069, IFI=O.925, CFI=0.920, TLI=0.905. According to the guidelines, there is evidence that our measurement model fits data. The results of empirical study are as follows. The path from film's perceptual fluency to film's preference fluency is supported(estimate: 0.223, C.R: 2.641). The path from film's conceptual fluency to film's preference fluency is supported(estimate: 0.397, C.R: 4.863). The path from distinction of image expression to film's perceptual fluency is not supported(estimate: 0.113, C.R: 1.665). The path from distinction of sound expression to film's perceptual fluency is supported (estimate: 0.190, C.R: 2.042). The path from correspondence between actors' image and their role to film's perceptual fluency is supported(estimate: 0.686, C.R: 5.566). The path from well-organized story to film's conceptual fluency is supported(estimate: 0.396, C.R: 4.023). The path from suitability of lines expression to film's conceptual fluency is supported(estimate: 0.536, C.R: 5.441). Concludingly, our study explored the influencing factors of film's processing fluency inducing film's Preference fluency. First, film's perceptual fluency and film's conceptual fluency have positive effects on film's preference fluency. Second, distinction of image expression is not significant on film's perceptual fluency, but distinction of sound expression and image's correspondence of actors' image and their role have positive effects on film's perceptual fluency. Lastly, well-organized story and suitability of lines expression have positive effects on film's conceptual fluency.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.65-70
• /
• 2005

Many case histories of re-liquefaction phenomena seem to support the idea that sand deposits, if they once have been liquefied, could be reliquefied again by a subsequent earthquake even though the earthquake is smaller than the previous one. The magnitude of the strains induced in the initial liquefaction has a significant influence on the resistance of the sample to re-liquefaction. The deposits undergoing liquefaction experience large shear strain during liquefaction. And this previous strain changes the microstructure into highly anisotropic structure such as columnlike structure and connected voids. This type of anisotropy is so unstable that it can reduce re-liquefaction resistance. It is blown that the extent of anisotropic structural change depends on the gradation characteristics of ground. The purpose of this study is to estimate the correlation between the gradation characteristics of the sand and the ratio of re-liquefaction resistance to liquefaction resistance. In this study, 1-g shaking table tests were carried out on five different kinds of sands. During the tests the values of excess pore pressure at various depths and surface settlements were measured. Re-liquefaction resistances were not affected by the initial void ratio and the effective confining pressures, and the deposits of all test sands which had once been liquefied were reliquefied in the cyclic loading number below 1 to 1.5. The ratio of re-liquefaction resistance to liquefaction resistance linearly decreased as $D_{10}/C_u$ increased, and was constant as about 0.2 above the value of $D_{10}/C_u$, 0.15 mm.

• Clinical and Experimental Pediatrics
• /
• v.46 no.5
• /
• pp.454-458
• /
• 2003

Purpose : Rotavirus is the main cause of infantile diarrheal disease worldwide. The purpose of this study is to assess the difference between clinical manifestations and feeding or delivery methods in healthy full-term neonates and those with nosocomially-acquired rotaviral infection. Methods : The study was conducted on 348 babies who were delivered in Dongguk University Kyongju Hospital from Jan 1 to June 30 in 2001. Stool specimens were collected from clinically symptomatic neonates. We studied the rate of positive stool rotazyme ELISA tests and positive symptoms. We compared the frequency of clinical manifestations according to the feeding methods [breast feeding(BF) or formula feeding(FF)] and the delivery methods[normal vaginal delivery(NVD) or Cesarean section(C/sec)]. Results : Rotavirus was detected in 152 of 348 babies. The rate of positive rotazyme ELISA test was 43.7% in healthy full-term symptomatic neonates. The most common symptom of rotaviral enteritis was mild fever; the others were watery diarrhea, abdominal distension, vomiting, delayed weight gain, irritability, poor oral intake and dehydration. Compared with FF neonates, BF neonates have lower frequency of symptoms, especially watery diarrhea, delayed weight gain and poor oral intake. The symptomatic frequency was higher in FF and NVD neonates than BF and C/sec. Conclusion : The symptoms of rotaviral enteritis were less frequent in BF or C/sec delivered neonates. BF appeared to alleviate the rotaviral enteritis but further studies are needed. The cause of the lower frequency of symptoms in C/sec delivered neonates was unknown.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.659-665
• /
• 2008

This study is about zeolite synthesis from the sewage sludge incinerator fly ash of "S" sewage treatment center located in Seoul. For this purpose, the properties of raw fly ash as starting material, the hydrothermal conditions for zeolite synthesis and the environmental applicabilities of synthesized zeolites were examined. Fly ash from sewage sludge incinerator has large quantities of SiO$_2$ and Al$_2$O$_3$ and their contents are 42.8 wt.% and 21.2 wt.% respectively. So fly ash is considered to be possible starting material for zeolite synthesis. The results from leaching test of fly ash showed that the concentration of hazardous metals were very low as compared with the Korea leaching standard of the Waste Management Law. But the concentration from total recoverable test of fly ash were higher than the fertilizer standard of Fertilizer Management Law. Major zeolite products synthesized by hydrothermal reaction are analcime in teflon vessel and zeolite P1 in borosilicate flask. Optimum conditions for the synthesis of analcime were 1 N of NaOH concentration, 16 hour of reaction time and 135$^{\circ}C$ of reaction temperature. For the zeolite P1 formation, the proper conditions were demonstrated to be 5 N of NaOH concentration, 16 hour reaction time and 130$^{\circ}C$ of reaction temperature in this study. Hazardous metal contents in the analcime product are similar with those in raw fly ash. In case of the zeolite P1, the contents are reduced to nearly a half. Raw fly ash and the analcime product showed NH$_4{^+}$ ion exchange capacity of 0$\sim$1.0 mg of NH$_4{^+}$g$^{-1}$ and 3.0$\sim$7.4 mg of NH$_4{^+}$g$^{-1}$, respectively. However, the zeolite P1 product reached exchange capacity to 14.6$\sim$17.8 mg of NH$_4{^+}$g$^{-1}$. This values are in the range of those of natural clinoptilolite and phillipsite. From this point of view, zeolite synthesis from sewage treatment sludge incinerator fly ash is a good alternative for solid waste recycling.

• Applied Biological Chemistry
• /
• v.19 no.4
• /
• pp.202-218
• /
• 1976

In this experiment American Summer Pairman apple was selected as test fruit in order to study the effect of sub-atmospheric pressure storage in the apple. keeping a certain pressure condition, a new sub-atmospheric pressure system was designed and constructed in which fruits were stored at $25^{\circ}C$ under two different atmospheric pressure conditions such as Normal Atmospheric Pressure (NAP) and Sub-Atmospheric Pressure (SAP). Moreover, they were divided into plots of 5% and 0% of $CO_2$, on the basis of gas composition. Under these conditions, the amount of respiration and ethylene evolution, and the changes of intercellular gas composition and organic components were investigated throughout the storage. The results obtained are as follows: (1) The intercellular gas was exhausted so rapidly by the SAP treatment that the gas equilibrium in the tissues reached within 5 minutes. (2) The amount of respiration was found to be higher in plots of NAP than SAP, and under the conditions, controlling $CO_2$ content, plots of $CO_2$ 5% were lower in the amount of respiration than $CO_2$ 0%. The climateric rise was revealed more slowly in plots of the SAP than NAP. These results indicate that the SAP treatment was an efficient method for controlling the respiration of fruits. Furthermore, these results were also realized with the results of the respiratory quotient (R.Q) and intercellular gas composition. (3) Evolution of ethylene, the ripening hormone in plant, was shown the similar tendency to the climacteric pattern of respiration; at the stage of climacteric maximum, the maximun amount of ethylene was found earlier in plots of NAP than SAP, and post climacteric stage was prolonged in the plots of the SAP compared to those of the NAP. The ethylene concentration in tissue appeared lower in plots of the SAP than NAP, which might suggest that the SAP treatment was caused to restriction of ethylene evolution. (4) Effects of the SAP treatment mentioned hitherto were proved also with the test of the external appearance such as changes of color and freshness, firmness, rotting and weight loss. (5) In the investigation of organic components, vitamin C and organic acids varied less in plots of SAP than NAP. Specially, it was remarkable that the loss of malic acid was least decreased by the SAP treatment. These effects of the SAP treatment were distinctive in the changes of the ratios of malic and citric acid to total acid, and the ratios of free sugar to free acid.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.389-396
• /
• 2002

The purpose of this study was to compare the microtensile bonding strength of chemomechanically excavated dentin($Carisolv^{TM}$) to conventional caries removal(bur). The following adhesive systems were used; AB: All-Bond 2(3M, USA), PB: Prime & Bond 2.1(Dentsply, DE), AQ: AQ Bond(sun medical, Japan). 42 human molars with occlusal caries were assigned to 6 groups. Sequential caries removal was controlled with laser fluorescence. Each group was devided as follows; group A, B, C were $Carisolv^{TM}$ applied, group D,E,F were bur used. In group A and D, AB was used as a dentin adhesive. group B,E and group C,F was AQ and AQ was used each. The cavity was filled with composite resin(Z-100). The specimens were sectioned vertically into multiple serial 0.7 mm thick slabs. And then those slabs were sectioned into rectangular parts under 0.7 mm width. Finally 0.7-1.0 mm a right hexahedron shape stick become. Microtensile bonding test was carried out with testing apparatus at cross-head speed of $0.5\;mm/min^{-1}$ and fractured surfaces were observed with scanning electron microscope(JSM-6400, Jeol, Japan). The obtained results were summarized as follows ; 1. In the group of caries removal with $Carisolv^{TM}$, micro-tensile bonding strength decreased to $75.8{\sim}80$ percent of bur used group. 2. In the group of caries removal with $Carisolv^{TM}$, decreased degree of micro-tensile bonding strength is not so different in 3 kinds of dentin adhesives(p<0.05). 3. In the group of caries removal with $Carisolv^{TM}$, microtensile bonding strength of AB, PB, AQ was 32.6MPa(2.4), 30.1Mpa (1.8), 21.2Mpa(1.9). 4. In the group of caries removal with Bur and $Carisolv^{TM}$, microtensile bonding strength of AQ was significantly lower than that of AB and PB(p<0.01).