• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.278-284
• /
• 1995

Thin fihn SnO$_{2}$ Gas Sensor was fabricated by electron-beam evaporation system and the target made by general firing method for the purpose of detecting gas components in air, especially methane gas. SnO$_{2}$ thin film was prepared on the polished alumina substrate which Pt interdigital electrode was precoated. The effects of annealing temperature and substrate temperature on the structural properties of SnO$_{2}$ thin film on glass were investigated using the X-ray diffraction. The good crystalline structure is formed when substrate temperature is 150[.deg. C] and annealing condition is 550[.deg. C], 1[hour]. And the sensing properties at various thickness of the SnO$_{2}$ thin film and the effects of PdCI$_{2}$ addition were also investigated. The good result is showed when the thickness is below 1000[.angs.] and the quantity of PdCI$_{2}$ addition is 4[wt%]. The thickness of SnO$_{2}$ thin film was measured by .alpha.-step and Elliopsometer.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1631-1636
• /
• 1989

A space charge model for semiconductor reduced gas sensors has been roposed and applied to gas sensing mechanism. SnO2-x and SnO2-x/Pt thin film were deposited by vacuum evaporating method. And Hall effect and gas sensitivity characteristics of these sensors were measured. From the space charge model and carrier concentration, the number of the adsorbed gas atom on the solid surface was calculated quantitatively. The gas sensing model was compared with CO gas sensitivities of the fabricated thin film gas sensors.

• 전기화학회지
• /
• 제11권3호
• /
• pp.154-158
• /
• 2008

The synthesis of hollow ${Sb_93}{Pt_7}$ nanospheres smaller than 30 nm with a shell consisting of smaller nanoparticles, with an average particle size of ${\sim}$ 3 nm is reported. The formation of this alloy is driven by galvanic replacement reaction involving Sb nanoparticles and ${H_2}{PtCl_6} $ without need for any additional reductants. Further, the reaction proceeds selectively as long as the redox potential between two metals is favorable. The capacities of the hollow samples are 669 and 587mAh/g at rates of 1 and 7C, respectively, while those values for the nanoparticles are 647 and 480mAh/g at rates of 1, 7C, respectively. This result shows the significantly improved capacity retention of the hollow sample at higher C rates, indicating that high surface area of the hollow nanospheres makes the current density more effective than that for the solid counterpart.

• 분석과학
• /
• 제28권1호
• /
• pp.8-16
• /
• 2015

We prepared a novel electrochemical gas sensor (EG sensor) based on interdigitated electrode (IDE) coated with vinyl ionic liquids (ILs) as electrolyte and Pt-Ru-Mo/MWNT electrocatalysts for occurring redox-active of CNCl gas. The vinyl ILs such as 1-butyl-3-(vinylbenzyl)imidazolium chloride, $[BVBI]^+Cl^-$, and 3-hexyl-1-vinylimidazolium bromide, $[HVI]^+Br^-$, were synthesized by $SN_2$ reaction in order to use electrolyte. The Pt-Ru-Mo/MWNT electrocatalysts were also prepared by one-step radiation-induced reduction of metal ions in the presence of MWNTs as supports. The fabricated EG sensor with vinyl ILs electrolyte was evaluated through optical microscopy (OM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The prepared EG sensor is clearly detected over 2.0 ppm CNCl gas and is exhibited a liner relationship between current and concentration over a region of 10-100 ppm.

• 센서학회지
• /
• 제11권6호
• /
• pp.350-357
• /
• 2002

센서의 안정도와 감도를 개선시킬 수 있는 단일전극을 가진 열선형 마이크로 가스센서를 제작하였다. 일반적으로, 금속산화물 반도체를 이용한 가스센서는 히터전극과 감지전극의 두 개의 전극을 가지고 있다. 제작된 센서는 히터전극위에 감지물질을 형성하여 단일 전극을 가지는 구조를 가지고 있다. 히터와 감지전극으로 사용되는 Pt는 glass 기판위에 스퍼터링법으로 형성하였으며 $SnO_2$ 감지물질은 제작된 Pt 전극위에 열증착시켜 형성하였다. $SnO_2$ 막은 lift-off 공정을 이용해서 패턴을 형성하고 1시간 동안 산소분위기에서 열산화하였다. 제작된 소자의 크기는 $1.9{\times}2.1\;mm^2$이다. CO 가스에 대한 감지특성을 조사한 결과 1,000 ppm에 대해 100 mV의 출력변화를 나타내었으며, 넓은 농도범위($0{\sim}10,000\;ppm$)에서 선형적인 전압출력을 나타내었다. 또한 가스 반응 전과 반응 후의 전압출력을 비교해 볼 때, 1% 이내의 편차를 나타내는 우수한 회복성을 나타내었다.

• 대한전자공학회논문지SD
• /
• 제43권8호
• /
• pp.13-18
• /
• 2006

Sn과 Zn 금속을 이용해 각각 산소와 아르곤 가스를 주입한 대기압 분위기에서 열처리를 통해 $SnO_2$와 ZnO 나노박막을 형성시켰다. 나노구조로 형성된 $SnO_2$ 박막의 경우 CO 가스(5,000 ppm)에 대해 $200^{\circ}C$의 동작온도에서 약 50 %의 감도를 나타내었으며, $SnO_2$ 나노 금속산화물에 Pt 금속을 이온 코팅법에 의해 첨가한 박막의 경우에는 동작온도 $150^{\circ}C$에서 73 %의 높은 감도를 얻을 수 있었다. 순수 ZnO 나노 박막의 경우 NOx(20 ppm) 가스에 대해 낮은 감도를 나타내었으나, Cu를 이온 코팅법에 의해 첨가한 박막의 경우에는 동작온도 $200^{\circ}C$에서 90 %의 높은 감도를 나타내었다. 나노 구조가 아닌 $SnO_2$와 ZnO 박막이 가지는 CO와 NOx에 대한 가스 감도에 비해 매우 높은 감도를 가짐을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.626-631
• /
• 2012

$SnO_2$ nanoparticles were synthesized by flame spray pyrolysis, which were directly deposited on Pt interdigitated substrates. Gas sensing performance was evaluated for various gases such as $H_2$, CO, $H_2S$, and $NH_3$, and it was compared with that of commercial $SnO_2$ nanopowder. The synthesis of $SnO_2$ nanoparticles was also conducted in various solvents. As a result, the primary particle size was changed with the solvent of precursor solution, and their $H_2$ sensing properties were significantly affected.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.305-309
• /
• 2012

In this study, ZnO nanorods and $SnO_2$-CuO heterogeneous oxide were grown on membrane-type gas sensor platforms and the sensing characteristics for carbon monoxide (CO) were studied. Diaphragm-type gas sensor platforms with built-in Pt micro-heaters were made using a conventional bulk micromachining method. ZnO nanorods were grown from ZnO seed layers using the hydrothermal method, and the average diameter and length of the nanorods were adjusted by changing the concentration of the precursor. Thereafter, $SnO_2$-CuO heterogeneous oxide thin films were grown from evaporated Sn and Cu thin films. The average diameters of the ZnO nanorods obtained by changing the concentration of the precursor were between 30 and 200 nm and the ZnO nanorods showed a sensitivity value of 21% at a working temperature of $350^{\circ}C$ and a carbon monoxide concentration of 100 ppm. The $SnO_2$-CuO heterogeneous oxide thin films showed a sensitivity value of 18% at a working temperature of $200^{\circ}C$ and a carbon monoxide concentration of 100 ppm.

• 센서학회지
• /
• 제17권4호
• /
• pp.281-288
• /
• 2008

Polyacrylonitrile(PAN)/metal oxide(MO) nanocomposite mats with a thickness of 0.12 mm were electrospun by adding 0 to 10 wt% of MO nanoparticles ($Fe_2O_3$, ZnO, $SnO_2$, $Sb_2O_3-SnO_2$) into PAN. Pt electrode was patterned on $Al_2O_3$ substrate by DC sputtering and then the PAN(/MO) mats on the Pt patterned $Al_2O_3$ were electrically wired to investigate the $CO_2$ gas sensing properties. As the MO content rose, the fiber diameter decreased due to the presence of lumps caused by the presence of MOs in the fiber. The PAN/2% ZnO mat revealed a faster response time of 93 s and a relatively short recovery of 54 s with a ${\Delta}R$ of 0.031 M${\Omega}$ at a $CO_2$ concentration of 200 ppm. The difference in sensitivity was not observed significantly for the PAN/MO fiber mats in the $CO_2$ concentration range of 100 to 500 ppm. It can be concluded that an appropriate amount of MO nanoparticles in the PAN backbone leads to improvement of the $CO_2$ gas sensing properties.

• 센서학회지
• /
• 제6권6호
• /
• pp.445-450
• /
• 1997

후막형 암모니아 가스센서를 제조하여 가스 감지특성을 조사하였다. 저농도의 암모니아 가스에 감도가 우수한 산화물 반도체 감지물질은 $FeO_{x}-WO_{3}-SnO_{2}$ 이었으며 100 ppm 이하의 암모니아 가스에 노출될 때 감지막의 저항이 증가하는 특이한 경향을 나타내었다. 반면 암모니아 외의 일반적인 환원성 가스에 노출될 때는 저항이 감소하는 경향을 보였다. 이러한 암모니아 가스 감지소자와 감지물질이 Pt-doped $WO_{3}-SnO_{2}$ 로 구성된 보상소자를 결합하여 센서어레이를 제조하였으며 그 특성을 조사하였다. 보상소자는 암모니아 가스와 일반적인 환원성 가스모두에 의해 저항이 감소하는 경향이 있다. 센서 어레이는 감지소자와 보상소자를 하나의 기판위에 형성하여 제조되었으며 우수한 선택성을 얻을 수 있었다. 이러한 개념의 센서어레이를 이용하면 가스센서의 선택성 향상을 기할 수 있음을 확인할 수 있었다.