• 마이크로전자및패키징학회지
• /
• 제8권1호
• /
• pp.27-32
• /
• 2001

($Zr_{0.8}, Sn_{0.2})TiO_4$의 소결온도를 저하시키고 품질계수 향상의 목적으로 첨가한 $V_2O_5$가 다른 donor형태의 화합물과 달리 품질계수의 저하를 가져오는 원인을 $Ta_2O_5$가 첨가된 ($Zr_{0.8}, Sn_{0.2})TiO_4$와 미세 구조변화, 전기전도도, 산화상태의 관점에서 비교 분석하였다. 일반적으로 donor형태의 화합물의 첨가는 ($Zr_{0.8}, Sn_{0.2})TiO_4$의 산소공공의 농도를 감소시켜 품질계수의 증가를 가져오는 것으로 알려져 있다. $V_2O_5$의 첨가의 경우는 액상소결에 의한 결정입계상 존재, 섬유상 형태의 $V_2O_5-TiO_2$rich 이차상 형성 및 Vanadium 이온의 산화상태 불안정에서 기인된 산소공공의 농도 증가가 복합적으로 ($Zr_{0.8}, Sn_{0.2})TiO_4$의 품질계수 저하 요인으로 작용하였다.

• 한국표면공학회지
• /
• 제30권3호
• /
• pp.202-212
• /
• 1997

The composition and the microstructure of the Sn-Ni alloy electrodeposited in pyrophosphate bath were investigated according to the electrolysis conditions. The cathode current efficiency increased with the addition of $NH_4CI$ and glycine, while it decreased with the increase of current density. The Sn content of the alloy deposits increased with the increase of $NH_4CI$ in the bath. The alloys with 51~71wt.% Sn had the NiSn single phase structure. The preferred orientation of the single phase alloys changed from (110) to (110)+(101) with the increase of current density and cathode overpotential. The single phase alloys with 50~60wt.%Sn had the smooth surface structure with fine crystallite, while the multiphase alloys showed the surface structure with crystal size and cracks at high curret density.

• 한국재료학회지
• /
• 제4권4호
• /
• pp.428-438
• /
• 1994

Y-Ba-Cu-O 계에서 123상의 성장에 미치는 Sn의 효과를 관찰하기 위하여 Sn이 첨가된 123+Sn성형체와 Sn이 첨가되지 않은 123성형체와의 couple시편을 만들었다. $1100^{\circ}C$에서 24시간 유지한 후 $970^{\circ}C$에서 1시간 유지한 시편에서 123상은 Sn이 첨가된 123+Sn 성형체의 표면에서부터 생성되어 Sn이 첨가되지 않은 123성형체 내부쪽으로 성장하였다. $1100^{\circ}C$에서 48시간 유지한 후 $970^{\circ}C$에서 1시간 유지한 시편에서는 123상이 관찰되지 않았으며 Y-Ba-Sn으로 구성된 결정립이 관찰되었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.131-131
• /
• 2001

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.146-146
• /
• 2000

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 춘계학술발표회
• /
• pp.76-76
• /
• 1997

• 한국주조공학회지
• /
• 제31권6호
• /
• pp.362-365
• /
• 2011

In the present work, the corrosion properties of Mg-xSn (x = 1, 3, 5, 7 and 9 wt.%) alloys have been investigated. Potentiodynamic polarization and immersion tests were carried out in 3.5% NaCl solution of pH 7.2 at room temperature to measure the corrosion properties of Mg-xSn (x = 1, 3, 5, 7 and 9 wt.%) alloys. With increase of the Sn contents, the volume fraction of the $Mg_2Sn$ phase was increased. The corrosion rate of Mg-xSn alloys was increased up to 7 wt.%Sn and decreased above 9 wt.%Sn. Initiation of galvanic site during immersion mainly occurred at Mg/$Mg_2Sn$ interface and propagation went into ${\alpha}$-Mg. For this reason, corrosion properties of Mg-xSn (added from 1 wt.%Sn to 7 wt.%Sn alloys) alloys are decreased because the galvanic site was increased with increasing Sn addition. In Mg-9wt.%Sn alloy, however, the corrosion site were changed from Mg/$Mg_2Sn$ interface to ${\alpha}$-Mg/$M_2Sng$ interface in lamellar structure. Preferentially corrosion of ${\alpha}$-Mg/$M_2Sn$ interface in lamellar structure impeded corrosion propagation went into ${\alpha}$-Mg.

• 한국주조공학회지
• /
• 제18권6호
• /
• pp.570-577
• /
• 1998

An investigation has been conducted to describe solidification characteristics in Sn-Zn binary system and Sn-Zn-Ag ternary system added by Ag produced by the continuous casting process using heated mold as a basic study for developing Pb-free solder materials. To obtain the continuous casting rods with mirror surface and near net shape at higher casting speed, water flow rates must be increased and mold temperature must be lowered. However, surface tearing in the casting rods occured at lower continuous casting speed while break out occured at higher continuous casting speed even if optimum conditions such as water flow rate and heated mold temperature are determined. Primary ${\alpha}Sn$ and eutectic structure in unidirectioally solidified Sn-Zn alloys were finer with increased casting speed. But, directionality may not be expected for primary Zn in hypereutectic Sn-Zn alloy. It was found that the addition of $0.2{\sim}0.8%$ Ag promoted the growth of primary ${\alpha}Sn$ dendrites. The changes of tensile strength and elongation in Sn-Zn binary alloys were not observed while the increase of tensile strength and the decrease of elongation in Sn-Zn-Ag ternary alloys were observed with increased casting speed.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.895-900
• /
• 1996

수산염볍으로 Ba(Ti1-xSnx)4O9 분말을 합성하였다. Ti자리에 Sn이 치환되면 생성된 BaTi4O9은 고용체를 형성하기 때문에 안정화되었다. BaTi4O9 결정상의 생성을 위한 최적 고용량은 0.16mole이었으며, 그 이상 첨가시는 BaTi4O9 결정 성장을 억제하였다. 0.16mole Sn을 첨가하여 135$0^{\circ}C$에서 30분 소결하였을 때 긴 막대형의 결정이 가장 잘 발달하였고, 이때 Q값이 가장 높았다. 그러나 Sn 첨가량이나 소결 유지시간을 변화시켜도 유전율은 거의 일정하였다.

• 한국재료학회지
• /
• 제18권8호
• /
• pp.438-443
• /
• 2008

SnO nanosheets were prepared at room temperature through a reaction between an aqueous solution of $SnCl_2$, $N_2F_4$, and NaOH and were converted into $SnO_2$ nanosheets without a morphological change. The SnO nanosheets were formed through a dissolution-recrystallization mechanism. Uniform and well-dispersed SnO nanosheets with the round-shape morphology were attained when the solution was treated by ultrasonic sound immediately after the addition of NaOH. The $SnO_2$ nanosheets prepared by means of solution reduction under the ultrasonic treatment, and subsequent oxidation at $600^{\circ}C$ showed a high level of gas sensitivity to $C_2H_5OH$ and $CH_3COCH_3$.