• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.224-243
• /
• 2014

This study examined the materials and casting technology(cast, alloy, etc.) used in the manufacturing of bronze artifacts based on old literature such as Yongjae Chonghwa, Cheongong Geamul, and The Korea Review. In the casting experiment for restoration of Sangpyong Tongbo, a bronze and brass mother coin mold was made using the sand mold casting method described in The Korea Review. The cast was comprised of the original mold plate frame, wooden frame, and molding sand. Depending on the material of the outer frame, which contains the molding sand, the original mold plate frame can be either a wooden frame or steel frame. For the molding sand, light yellow-colored sand of the Jeonbuk Iri region was used. Next, the composition of the mother alloy used in the restoration of Sangpyong Tongbo was studied. In consideration of the evaporation of tin and lead during actual restoration, the composition of Cu 60%, Zn 30%, and Pb 10% for brass as stated in The Korea Review was modified to Cu 60%, Zn 35%, and Pb 15%. For bronze, based on the composition of Cu 80%, Sn 6%, and Pb 14% used for Haedong Tongbo, the composition was set as Cu 80%, Sn 11%, and Pb 19%. The mother coin mold was restored by first creating a wooden father coin, making a cast from the wooden frame and basic steel frame, alloying, casting, and making a mother coin. Component analysis was conducted on the mother alloy of the restored Sangpyong Tongbo, and its primary and secondary casts. The bronze mother alloy saw a 5% increase in copper and 4% reduction in lead. The brass parent alloy had a 5% increase in copper, but a 4% and 12% decrease in lead and tin respectively. Analysis of the primary and secondary mother coin molds using an energy dispersive spectrometer showed that the bronze mother coin mold had a reduced amount of lead, while the brass mother coin mold had less tin. This can be explained by the evaporation of lead and tin in the melting of the primary mother coin mold. In addition, the ${\alpha}$-phase and lead particles were found in the mother alloy of bronze and brass, as well as the microstructure of the primary and secondary coin molds. Impurities such as Al and Si were observed only in the brass mother coin mold.

• The Korean Journal of Nuclear Medicine
• /
• v.35 no.5
• /
• pp.334-341
• /
• 2001

Purpose: Ascorbic acid us known to act as an antioxidant. Therefore, it can be used in increasing the efficiency of radiochemical labeling of Technetium-99m setamibi by inhibition of oxidation of $Sn^{2+}$ at low concentration. We intended to estimate the efficiency of radiochemical labeling and the stability of the newly formed formulation when ascorbic acid was added to a commercial kit. Materials and Methods: Synthesis of sestamibi was performed according to Dong-A's patent procedure (No.10-2001-0012877). First, we undertook a study to evaluate the efficiency of radiochemical labeling of sestamibi containing ascorbic acid. The stability of the vials was assessed using either $7.5{\mu}g\;or\;75{\mu}g$ of ascorbic acid, added to commercial vials under the accelerated condition(Temp : $40^{\circ}C{\pm}2^{\circ}C$, Relative humidity : $75{\pm}5%$). Results: Sestamibi was synthesized in overall 35-40% yield over 5 steps from a commercially available methallyl chloride as a starling material. When ascorbic acid was added, the efficiency of radiochemical labeling was maintained compared to the vial with no ascorbic acid. The accelerated test showed that the addition of ascorbic acid inhibited the oxidation of $Sn^{2+}$ ion by antioxidation mechanism. Also, the efficiency of radiochemical labeling of this vial after 9 months was nearly the same as the starting point. Therefore, the storage period of the kit is likely to be extended. Taken together, it suggests that the addition of ascorbic acid as a stabilizer is desirable. Conclusion: To increase the stability of a sestamibi cold kit, it is desirable to add ascorbic acid as a stabilizer to the commercial formulation.

• Archives of Pharmacal Research
• /
• v.26 no.7
• /
• pp.554-558
• /
• 2003

Platelet activating factor acetylhydrolase (PAF-AH) activity has been identified in cerebrospinal fluid (CSF) samples taken from children with meningitis. We reported that PAF-AH activity is significantly increased, by about 3 fold, in patients with meningitis compared to control subjects. Because of limited knowledge about this enzyme in CSF, we examined the biochemical properties of CSF PAF-AH. PAF-AH of CSF was calcium independent, showed a broad pH spectrum and was relatively heat stable. In addition, this enzyme activity was strongly inhibited by phenylmethanesulfonyl fluoride (PMSF), partially inhibited by p-bromophenacylbromide (p-BPB), uninhibited by iodoacetamide, and moderately stimulated by dithiothreitol (DTT). PAF-AH of CSF did not degrade phospholipid with a long chain fatty acyl group at sn-2 position. This enzyme hydrolyzed PAF and oxidatively modified phosphatidylcholine. Furthermore, we identified a monomeric polypeptide with a molecular weight of approximately 45 kDa by Western blot using human plasma PAF-AH antibody. These results suggested that plasma type PAF-AH activity exist in CSF taken from children with meningitis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.6
• /
• pp.764-771
• /
• 2013

The metal component of Chinese and Korean traditional gold thread was analyzed nondestructively using P-XRF and classified morphologically. In the nondestructive analysis of 22 Chinese and Korean artifacts, there were 10 gold threads made up of Au in China and 7 in Korea; in addition, there were 4 silver threads made up of Ag in Korea and 1 copper thread made up of Cu in China. In the morphological classification, 7 gilt paper strips were confirmed in China and Korea and 4 wrapped threads were identified in China and Korea. Zn, Sn and Fe (minor components of the threads) were detected. These components were assumed to be transferred from the metal found in burial goods.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.651-656
• /
• 2012

Cationic immunoliposomes were prepared by conjugation of Fab' fragments of the recombinant humanized monoclonal antibody (HuCC49) against tumor-associated glycoprotein (TAG)-72 to sterically unilamella liposomes. The cationic immunoliposomes are composed of cationic lipid (O,O'-dimyristyl-N-lysyl aspartate, DMKD), cholesterol, and 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[maleimide(polyethyleneglycol)$_{2000}$] (DPPE-PEG-maleimide) with a molar ratio of 0.5:0.47:0.03. Plasmid DNA was effectively condensed by addition of transferrin (Tf) during the formation of anti-TAG-72 PEG-immunolipoplexes (PILPs). These anti-TAG-72 PILPs were able to adhere to the surface of TAG-72-overexepressing LS174T human colon cancer cells more effectively than conventional liposomes, thereby facilitating gene delivery in vitro. Furthermore, intravenous administration of the anti-TAG-72 PILPs into the tumor-carrying mice exhibited efficient localization of the reporter gene in the tumor tissues.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.52-56
• /
• 2006

Some of factors affecting photo-conversion efficiency of dye sensitized solar cells (DSCs) are discussed in terms of $TiO_2$ electrodes. The first topic is on the surface modification of $TiO_2$ nano-particles, which is associated with electron traps on the surface of $TiO_2$ nano-particles. The surface is modified with dye molecules under pressurized $CO_2$ atmosphere to increase the surface coverage of $TiO_2$ nano-particles with dye molecules. This increases Jsc because of an increase in the amount of dye molecules and a decrease in the amount of trapping sites on $TiO_2$ nano-particles. In addition, the decrease in the amount of trap sites increases Voc because decreases in Voc are brought about by the recombination of $I_2$ molecules with electrons trapped on the $TiO_2$ surfaces. Selective staining for tandem cells is proposed. The second topic is on the contact between a $SnO_2$/F transparent conductive layer (TCL) and nano-particles. Polishing the TCL surfaces with silica nano-particles increases the contact, resulting in Jsc increases. The third topic is the fabrication of ion-paths in $TiO_2$ layers. Electro-spray coating of $TiO_2$ nano-particles onto TCL is shown to be effective for fabricating ion-paths in $TiO_2$ layers, which increases Jsc.

• Toxicological Research
• /
• v.6 no.1
• /
• pp.109-119
• /
• 1990

Ro09-0198, a cyclic peptide isolated from culture filtrates of Streptoverticillium griseoverticillatum, induced lysis of erythrocytes. Ro-09-0198-induced hemolysis was temperature-dependent and the sensitivity of hemolysis differed greatly among animal species. Preincubation of the peptide with phosphatidylethanolamine reduced the hemolytic activity, whereas other phospholipids present in erythrocytes in nature had no effect. A study of the structural requirements on phosphatidylethanolamine necessary for interaction with the peptide indicates that Ro09-0198 recognizes strictly a particular chemical structure of phosphatidylethanolamine: dialkylphosphoethanolamine as well as 1-acylglycerophosphoethanolamine showed the same inhibitory effct on hemolysis induced by Ro09-0198 as diacylphosphatidyl-ethanolamine, whereas phosphoethanolamine gave no inhibitory effect. Neither phosphatidyl-N-monomethylethanolamine nor alkylphosphopropanolamine had an inhibitory effect. Proton resonances of the peptide were observed in dimethyl sulfoxide solution in the presence of 1-dodecanoyl-sn-glycerophosphoethanolamine. This peptide caused permeability increase and aggregation of liposomes containing phosphatidylethanolamine. A glycerol backbone and a primary amino group of phosphatidylethanolamine are necessary for interaction with Ro09-0198 to cause membrane damage. Ro09-0198 induced a selective permeability change on liposomes. Glucose and umbelliferyl phosphate were effluxed significantly, but sucrose was only slightly permeable and inulin could not be released. Platelet aggregation and serotonin release simultaneously induced by Ro09-0198. Addition of peptide to rat platelet, loaded with the fluorescent $Ca^{++}$ chelator quin-2, caused immediate rise in cytosolic free $Ca^{++}$ to liposomal membrane containing phosphatidylethanolamine was observed dose dependently.

• Tribology and Lubricants
• /
• v.9 no.2
• /
• pp.49-55
• /
• 1993

The dry sliding wear properties of the sintered Cu-10 wt%Sn bronze alloys reinforced with $SiC_w$ and $SiC_p$ were investigated by a pin-on-disc wear testing machine. The worn surfaces and the cross sections of the wear specimens and the wear debris were observed by SEM to study the effect of the variation of the ceramic phase contents in the composite and the wear condition on the wear behaviors. The wear of bronze matrix was dominated by the adhesive wear. The transition from mild to severe wear was found in the bronze matrix specimens at the applied load higher than 20N where the surface delamination caused the severe wear. The addition of $SiC_w$ and $SiC_p$ reinforcements in the romposites was proved to reduce the wear rate by the matrix strengthening at the applied load higher than 20N. SiC whiskers having a large length to diameter ratio which hold the deformed matrix were effective to hinder the crack propagation near the worn surface. Thus the maximum wear resistance was obtained in the composite reinforced by $SiC_w$ at the higher applied load.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.3.2-3.2
• /
• 2011

Nanofibers, one of various one-dimensional nanomaterials such as nanorods, nanowires and nanotubes have been successfully synthesized by many groups in recent years and their applications to chemical sensors, catalytic filters and biomedicine, etc. are extensively tested. In particular, there is a possibility that chemical sensors based on oxide nanofibers can overcome the shortcomings of chemical sensors based on single nanowires. In order to prepare oxide nanofibers, the electrospinning method is most widely used. In this work, we synthesized various oxide nanofibers including ZnO, SnO2 and CuO by employing an electrospinning method and various shapes of nanofibers including core-shell nanofibers and hollow nanofibers as well. The response properties of the various nanofibers to oxidizing and reducing gaseous species have been investigated systematically. The normal oxide nanofibers showed high sensitivity and quite fast response time to many gaseous species. Furthermore, derivatives of normal nanofibers including hollow nanofibers, core-shell nanofibers and heterostructured nanofibers display much superior sensing properties. These results hold promise for the practical application of oxide nanofibers to chemical sensors. In addition, the sensing mechanisms operated in the nanofibers will be discussed in detail.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.242-245
• /
• 2013

Sn-doped $In_2O_3$ (ITO) thin films were prepared by radio frequency magnetron sputtering without intentional substrate heating on bare glass and $TiO_2$-deposited glass substrates to investigate the effect of a $TiO_2$ buffer layer on the electrical and optical properties of ITO films. The thicknesses of $TiO_2$ and ITO films were kept constant at 5 and 100 nm, respectively. As-deposited ITO single layer films show an optical transmittance of 75.9%, while $ITO/TiO_2$ bi-layered films show a lower transmittance of 76.1%. However, as-deposited $ITO/TiO_2$ films show a lower resistivity ($9.87{\times}10^{-4}{\Omega}cm$) than that of ITO single layer films. In addition, the work function of the ITO film is affected by the $TiO_2$ buffer layer, with the $ITO/TiO_2$ films having a higher work-function (5.0 eV) than that of the ITO single layer films. The experimental results indicate that a 5-nm-thick $TiO_2$ buffer layer on the $ITO/TiO_2$ films results in better performance than conventional ITO single layer films.