• 제목/요약/키워드: Sn addition

검색결과 585건 처리시간 0.029초

Pt Doping Mechanism of Vanadium Oxide Cathode Film Grown on ITO Glass for Thin Film Battery

  • Kim, Han-Ki;Seong, Tae-Yeon;Jeon, Eun-Jeong;Cho, Won-Il;Yoon, Young-Soo
    • 한국세라믹학회지
    • /
    • 제38권1호
    • /
    • pp.100-105
    • /
    • 2001
  • An all solid-state thin film battery (TFB) was fabricated by growing, undoped and Pt-doped vanadium oxide cathode film ( $V_2$ $O_{5}$ ) on I $n_2$ $O_3$: Sn coated glass, respectively. Room temperature charge-discharge measurements based on Li/Lipon/ $V_2$ $O_{5}$ full-cell structure with a constant current clearly shows that the Pt-doped $V_2$ $O_{5}$ cathode film is superior, in terms of cyclibility. X-ray diffraction (XRD) results indicate that the Pt doping process induces a more random amorphous structure than an undoped $V_2$ $O_{5}$ film. In addition to its modified structure, the Pt-doped $V_2$ $O_{5}$ film has a smoother surface than the undoped sample. Compared to an undoped $V_2$ $O_{5}$ film, the Pt doped $V_2$ $O_{5}$ cathode film has a higher electron conductivity. We hypothesize that the addition of Pt alters electrochemical performance in a manner of making more random amorphous structure and gives an excess electron by replacing the $V^{+5}$. Possible mechanisms are discussed for the observed Pt doping effect on structural and electrochemical properties of vanadium oxide cathode films, which are grown on I $n_2$ $O_3$: Sn coated glass.

  • PDF

도재소부용 18K 금합금의 미량원소의 첨가에 따른 물리적 성질의 변화에 관한 연구 (A Study on Change of Physical Property in Porcelain Fused to 18K Gold Alloy by Small Additional Elements)

  • 이기대
    • 대한치과기공학회지
    • /
    • 제30권2호
    • /
    • pp.31-37
    • /
    • 2008
  • A variety of the porcelain fused to gold(PFG) have been developed to which porcelain can be fused. PFG alloys developed for this purposed have a high melting point and do not discolor when combined with porcelain. The design of the compositions of PFG is very important to esthetic restorative materials applying to porcelain. The purpose of this study is on the change of physical and mechanical characteristics in PFG 18K alloy by the small additional elements. Principal results are as follows. The high Au alloy containing 18Karat gold contents is respectively Au(75%), Pd(10%), Pt(4%), Ag(4%), In(2%), Sn(2%), Cu(2%), Ti(1%). These alloys are composed mainly of gold, platinum, silver and palladium with a few percent of the additional elements. By the addition of small amounts of elements such as In, Sn, Ti, the fine grain castings are produced in gold alloy and the small addition of platinum is very effective in increasing of hardness and strength. These gold alloys are representative of the changes to be expected as a result of heat treatment. These changes in strength and hardness values are sufficient to demonstrate a significant difference in performance between a as-casted and a heat-treated. These alloys have mechanical properties characteristics of Type and Type gold alloys. These alloys are useful to porcelain-metal restorations and dental laboratory. Also the porcelain fused to metal(PFM) alloys containing gold are commonly use for dental purposes in dental laboratory.

  • PDF

조선·해양 기자재용 강재의 내식성에 미치는 분체도장 중 산화물 첨가의 영향 (Effect of Oxide Particles Addition to Powder Coating on Corrosion Resistance of Steel Used as Marine Equipments)

  • 박진성;류승민;정영재;김성진
    • Corrosion Science and Technology
    • /
    • 제19권2호
    • /
    • pp.100-107
    • /
    • 2020
  • The demand for powder-coated steel used in the marine industry is increasing owing to their superior corrosion resistance. However, the powder coatings used in commercial products can deteriorate easily by the penetration of brine. In an attempt to suppress brine penetration into the powder coating and significantly increase the corrosion resistance, three types of oxide particles were added to the coating. Electrochemical impedance spectroscopy tests in 3.5% NaCl solution were performed to evaluate the corrosion behaviors of the powder coating with oxide particles. The results showed that the addition of SiO2 particles to a powder coating severely decreased the corrosion resistance due to the easy detachment of agglomerated SiO2 particles with a coarse size from the coating layer. In contrast, the TiO2 and SnO2-added coatings showed better corrosion resistance, and the TiO2-added coating performed best in the test conducted at room temperature. However, conflicting results were obtained from tests conducted at a higher temperature, which may be attributed to the effective suppression of brine penetration by the fine SnO2 particles uniformly distributed in the coating.

옥살레이트 침전법에 의한 폐솔더 박리액에서 주석 및 구리의 회수 (Recovery of Tin and Copper from Waste Solder Stripper by Oxalate Precipitation)

  • 류승형;안재우;안효진;김태영
    • 자원리싸이클링
    • /
    • 제23권3호
    • /
    • pp.37-43
    • /
    • 2014
  • 폐솔더 박리액으로부터 옥살산 침전법을 이용하여 주석 및 구리의 분리 침전을 통해 각각 금속염으로 회수하기 위한 기초 연구를 실시하였다. 먼저 옥살산의 첨가에 따라 주석의 침전 제거율이 증가하였으며 당량비(옥살산/주석)의 1.0-1.5배를 첨가할 경우 주석이 99.5%의 이상 제거율을 나타내었다. 이 경우에 구리는 2.0% 정도 침전되었고 철, 납등은 침전되지 않아 주석만 선택적으로 침전되는 것을 확인 하였다. 반응온도 증가에 따라 주석의 침전율은 증가하여 $60^{\circ}C$ 부근에서 최대값을 보이다가 온도가 더 증가하면 오히려 감소 경향을 보였다. 침전물을 여과 건조시켜 $SnO_2$의 산화물을 얻을 수 있었다. 주석이 제거된 폐솔더 박리액에 옥살산을 첨가하여 구리를 납, 철 등의 금속이 선택적으로 약 91% 이상 침전되어 회수가 가능하였다.

전이금속염 첨가에 의한 판상 α-Al2O3 결정체 제조 (Preparation of Flaky α-Al2O3 Crystals by Transition Metal Salts Addition)

  • 송효경;박병기;이정민
    • 한국세라믹학회지
    • /
    • 제42권6호
    • /
    • pp.384-390
    • /
    • 2005
  • [ ${\alpha}-Al_2O_3$ ] precursor was synthesised by sol-gel method using aluminum sulfate, sodium sulfate and sodium carbonate as law materials. The flaky ${\alpha}-Al_2O_3$ crystals were prepared by heating using precursor about $1,050^{\circ}C$. In this study, the effect of some transition-metal sulfate ($FeSO_4,\;SnSO_4,\;ZnSO_4$) addition have been investigated. When iron sulfate was added, it could see that act on impurities in crystal growth process. In case of tin sulfate, distribution of Platelets was very broad. When flaky ${\alpha}-Al_2O_3$ crystals were prepared zinc sulfate addition, thickness, size, and distribution of platelets was suited to industrial application. The average diameter of flaky ${\alpha}-Al_2O_3$ crystals was about 20 $\mu$m, and its thickness was about 0.3 $\mu$m. Increasing addition of zinc sulfate, thickness of ${\alpha}-Al_2O_3$ platelet was decreased.

Correlation of the Rates of Solvolyses of 4-Methylthiophene-2-carbonyl Chloride Using the Extended Grunwald-Winstein Equation

  • Choi, Ho-June;Koo, In-Sun
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권2호
    • /
    • pp.499-504
    • /
    • 2012
  • The specific rates of sovolysis of 4-methylthiophene-2-carbonyl chloride (1) have been determined in 26 pure and binary solvents at $25.0^{\circ}C$. Product selectivities are reported for solvolyses of 1 in aqueous ethanol and methanol binary mixtures. Comparison of the specific rates of solvolyses of 1 with those for p-methoxybenzoyl chloride (2) in terms of linear free energy relationships (LFER) are helpful in mechanistic considerations, as is also treatment in terms of the extended Grunwald-Winstein equation. It is proposed that the solvolyses of 1 in binary aqueous solvent mixtures proceed through an SN1 and/or ionization (I) pathway rather than through an associative $S_N2$ and/or addition-elimination (A-E) pathway.

Cr2O3 첨가에 따른 PSS-PZT 압전 세라믹스의 유전 및 압전 특성 (Dielectric and Piezoelectric Characteristics of PSS-PZT Piezoelectric Ceramics with CrS12TOS13t Addition)

  • 홍재일;이개명;윤석진;유주현;박창엽
    • 대한전기학회논문지
    • /
    • 제41권6호
    • /
    • pp.687-693
    • /
    • 1992
  • To improve dielectric, piezoelectric and temperature stability in 0.50Pb(SnS11/2TSbS11/2T)OS13T - 0.35PbTiOS13T - 0.60PbZrOS13T + 0.4[wt%]MnOS12T piezoelectric ceramics which is used for surface acoustic wave devices, CrS12TOS13T was added and the specimens were fabricated by Hot Press method, and their characteristics were measured with CrS12TOS13T addition. From the results, in the specimen added by 0.2[wt%]CrS12TOS13T, dielectric constant and mechanical quality factor were 380 and 2307, respectively, and it was suited for surface acoustic wave device and the temperature coefficient of the resonant frequency in the specimen added by 0.4[wt%]CrS12TOS13T was the least value of 74.96[ppm/$^{\circ}C$].

과잉 PbO에 의한 (Pb,Y) $(Zr,Sn,Ti)O_3$세라믹스의 유전 및 전기장유기변형 특성 (Dielectric and Field-induced Strain Behaviors due to Excess PbO in Lead Yttrium Zirconate Stannate Titanate Ceramics)

  • 윤기현;김정희;강동헌
    • 한국재료학회지
    • /
    • 제10권1호
    • /
    • pp.34-40
    • /
    • 2000
  • 디지털형 압전/전왜 액츄에이터 응용을 위하여 상경계(반강유전상/강유전상) 조성인 $Pb_{0.94}Y_{0.04}[(Zr_0.6Sn_0.4)_{0.915}Ti_0.085]O_3$ (PYZST) 계를 택하여 과잉 PbO의 첨가량 및 소결 조건 변화에 따른 상전이 특성, 유전 특성 및 전기장 유기변형 특성을 연구하였다. 사방정 구조를 갖는 PYZST 세라믹스에서 과잉 PbO 첨가에 따른 결정구조의 변화는 거의 확인되지 않았으나, 소결 후 입자가 약간 작아지며 둥근 형태로 변화하였고 첨가량 증가에 따라 적정 소결온도는 감소하였다. 과잉 PbO의 첨가량이 증가함에 따라, 분극측정시 반강유전상이 보다 안정되는 경향을 보였고, 전계유도변형 측정시 인가전기장 제거상태에서의 변형의 형상기억성이 감소하고 디지털형 변형곡선 특성이 강화되었다. 또한 최대 유전상수와 전계 유기변형량은 감소하였으나 반면 상전이(반강유전상$\leftrightarrow$강유전상) 전기장 및 비저항은 증가하는 경향을 나타냈다. 이러한 결과는 과잉으로 첨가된 PbO에 의한 격자 결함반응 및 분역벽 이동 거동 가능성과 연관시켜 설명하였다.

  • PDF

아말감과 이종(異種)금속의 거리에 따른 부식에 대한 고찰 (A Study on Corrosion according to Distance between Amalgam and Dissimilar Metals)

  • 김주원;정은경
    • 치위생과학회지
    • /
    • 제4권3호
    • /
    • pp.103-109
    • /
    • 2004
  • 본 실험은 제조회사 매뉴얼과 통법에 의해서 Amalgam 합금, Ni-Cr alloy의 Crown용 Verabond, Denture용 Talladium $^{TM}alloy$로 각각 24개의 총 72의 시편을 하악 제1대구치근 원심 치관 폭경과 임상에서의 MOD cavity를 고려하여 제작하였고 인공 타액 80ml를 담은 200ml 용 비이커에 시편을 넣어 0mm, 7mm, 40mm 거리에서 7일 후 갈바닉 부식을 측정하였다. 유리금속은 유도 플라즈마 방출 분광기(Inductively Coupled Plasma - Atomic Emission Spectrometer(ICP-AES, JY-50P, VG Elemental Co. France)로 전해액내의 Cu, Ag, Ni, Cr, Sn, Zn, Hg를 정량 분석했으며 그 결과 다음과 같은 결론을 얻었다. 첫째, Cu, Sn, Ag, Hg, Zn은 아말감이 금 합금과 접촉했을 때가 크라운용 Ni-Cr alloy와 덴쳐용 Talladium alloy 보다 아주 많이 유리 했으며 금 합금이 구강조직과 생체 적합성이 가장 좋다지만 아말감과 함께 있을 때 가장 불리 했슴을 알 수 있었다. 둘째, 아말감이 금 합금과 접촉했을 때, 금 합금의 조성에서 Ni, Cr 같은 중금속이 함유되지 않았기 때문인지 전혀 유리되지 않았으나 Sn은 조성에는 없었지만 $227.1{\pm}18.0035{\mu}g/cm^2$나 유리 되었고 Hg도 유리되었는데 이는 아말감 자체의 유리 물질임을 추측할 수 있었다. 셋째, 아말감 합금과 금 합금 사이에서의 0mm, 7mm, 40mm 거리에서는 Cu, Ag는 유의성이 있었으며 Hg는 유의성이 없었다. 이는 금합금은 절대 아말감과 같이 사용해서 안되며 이종 보철물 사이의 거리에 관계없이 사용을 금해야 하는 것으로 사료된다. 넷째, 아말감합금이 Crown용 Ni-Cr 합금과 접촉했을 때 아말감의 Ag이 유리 되지 않았으며 Zn, Ni, Sn, Hg, Cu의 순으로 유리되었다. 0mm, 7mm, 40mm 거리에 따라서 유의성이 있었다. Hg는 유리 되지 않았지만 중금속인 Ni, Cr은 유리되었고 반대 악궁이나 거리가 떨어져 있으면 접촉보다 Hg의 유리가 적었다. 다섯째, 아말감합금이 Denture용 Talladium alloy 합금과 접촉했을 때 0mm, 7mm, 40mm 거리에서도 유의성이 있었다. 0mm, 7mm, 40mm 거리에 따라서 유의성이 있었다. Hg는 유리 되지 않았지만 중금속인 Ni, Cr은 유리되었고 반대 악궁이나 거리가 떨어져 있으면 접촉보다 Hg의 유리가 적었다. 여섯째, 인공 타액에서 접촉 시 Amalgam alloy와 Gold, Verabond, Talladium alloy의 Cu, Sn, Ag, Hg, Zn, Ni, Cr의 ICPES 검사 결과 Cu, Hg가 유의성을 있었다. 일곱째, 인공타액에서 아말감합금과 두 비귀금속인 Ni-Cr alloy(crown용), Denture용 Talladium alloy가 접촉한 경우 거리에 따른 Hg, Ni, Cr의 유리 부산물에서 유의성을 확인했다.

  • PDF

다구찌 기법을 이용한 FCM 가스켓의 강건 설계에 관한 연구 (A Study of Robust Design of FCM Gasket Using Taguchi Method)

  • 정진은;안중규
    • 한국산학기술학회논문지
    • /
    • 제14권7호
    • /
    • pp.3177-3183
    • /
    • 2013
  • 본 연구에서는 비석면 FCM(Fiber-elastomer Coated Metal) 가스켓의 강건 설계를 수행하였다. 이를 위하여 직교배열표를 사용한 실험계획법에 따라 전단력을 측정하는 실험을 수행하고 다구찌 기법을 사용하여 망대 SN비를 산출하여 영향을 미치는 제어인자를 파악하고 분산 분석을 수행하였다. 전단력에 영향을 미치는 제어인자로 온도, 압력, 시간 및 습도를 선택하였으며 각 제어인자에 대하여 3수준을 고려하여 $L_9(3^4)$ 직교배열표를 작성하였고, 이에 근거하여 측정 실험을 수행하였다. 다구찌 기법을 사용하여 망대 SN비를 산출하고 델타 통계량을 계산하였다. 시간의 델타 통계량이 0.93으로, 시간이 전단력에 가장 큰 영향을 미치는 결과를 얻었다. 다음으로 온도, 압력, 습도 순으로 영향을 미쳤다. 또한 시간 80초, 온도 $200^{\circ}C$, 압력 90 $kgf/cm^2$, 습도 60 %RH의 조건에서 전단력이 최대가 됨을 보였다. 이에 대한 분산 분석을 수행한 결과 시간과 온도는 각각 p값 0.037, 0.098을 보여 신뢰수준 95%와 90%에서 유의함을 밝혔다.