• 방송공학회논문지
• /
• 제21권5호
• /
• pp.749-759
• /
• 2016

방송의 영상콘텐츠가 HDTV로 제작되고 모니터가 대형화되면서 방송 조명에서 피사체의 얼굴 표현이 더욱 중요한 과제가 되었다. HDTV는 빛에 의한 영상 표현의 정밀성의 확대로 피사체의 인물 모델링은 좀 더 부드럽고 깨끗한 영상이미지가 필요하다. 디지털 시대의 인물에 비춰지는 조명 방식도 새로운 변화가 필요하게 되었다. HD 영상에서 피사체의 미적 표현을 위한 언더라이트의 표현 특성을 이용한 인물 모델링 방식이 주목받고 있다. 이에 본 연구에서는 언더라이트 광원의 강도, 거리, 크기가 인물 모델링 특성에 어떻게 영향을 미치는지 실험 측정하여 비교 분석하였다. 실험 결과를 종합적으로 살펴보면 언더라이트의 최적의 효과를 나타내기 위해서 강도는 총 밝기 대비 17%∼25.5%, 거리는 40cm이후, 크기는 최소한 20cm이상이 되어야만 좋은 결과를 가져올 수 있음을 보여주고 있다. 이러한 데이터는 향후 고화질 영상에서 인물을 좀 더 부드럽고 깨끗한 이미지를 얻는데 활용도가 높은 자료가 될 것이다.

• 한국식생활문화학회지
• /
• 제16권4호
• /
• pp.269-275
• /
• 2001

The present research was designed to collect recipe of set up a standard recipe and analyze the nutrients of broiled black goat meat (a kind of native local foods in Busan and south province). The results of the study are summarized as follows. The recipe for goat(lamb) meat was recorded in Sanlimkyounggae and Jungbosanlimkyounggae between 1715 and 1827. The goat meat was explained as food for health, rejuvenation and recuperation Since late 1800, it has been utilized for such use. The flavor of broiled black goat meat is influenced by seasonings, fruit juice, heating treatment and cooker. And it also could be affected by the method of slaughter and the sex of the goat. There are lot of element in seasoning. Red pepper paste, garlic and ginger holdback the bad smell and make the taste better. Onion help to retain the water and improve the flavor. Starch syrup, sugar and sesame oil make the meat smoother, glossier and more tasty. The meat is usually roasted on grill over charcoal. It helps to remove or suppress the bad smell and make the taste better. Softness and scent of the meat depend largely on the way to butcher. Female goat meat tastes smoother and smells better. Fruit juice also improve the softness of the meat. Energy per 100g of the 'broiled black goat meat' is 170kcal. There are protein (23g), fat(2.4g), Ca(159mg), Fe(1.1mg) and so on. Amino acid is mainly comprised of essential amino acid such as cystine, lysine, leucine, and arginine. Fatty acid consists primarily of unsaturated fatty acid like oleic acid, linoleic acid.

• 대한조선학회논문집
• /
• 제38권4호
• /
• pp.30-38
• /
• 2001

조류를 고려한 조종운동방정식을 정립한 후 선박의 운동변수 뿐만 아니라 외력 및 조류의 방향과 속도도 상태변수로 설정하여 비선형 상태방정식과 측정방정식을 표현하였다. 여기서 외력은 3차의 Gauss-Markov 프로세스로 표시하고, 조류의 방향과 속도는 일정하다고 가정하였다. 상태 추정을 위하여 확장 Kalman-Bucy 필터와 고정간격 스무더를 이용하였다. 기존의 Hwang은 실선 시운전 계측값을 이용하여 동유체력미계수 및 조류의 영향을 동시에 확장 Kalman 필터를 이용하여 추정하였으므로 매개변수의 개수가 상당히 많아지는 반면 모델링 전 추정기법을 사용하면 각각의 동유체력미계수를 추정하는 대신에 3방향의 외력과 조류 변수만을 추정한다. 측정잡음이 포함된 시뮬레이션 측정값을 적용하여 조류 변수를 추정하는 경우 실제값이 잘 추정되는 것을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제28권5호
• /
• pp.369-377
• /
• 2003

The aim of this study was to evaluate the effect of two polishing methods and chemical conditioning on the surface of hybrid composites. Ninety cylindrical specimens (diameter：8mm, depth：2mm) were made with three hybrid composites-Filtek Z250, Tetric Ceram. DenFil. Specimens for each composite were randomly divided into three treatment subgroups $^{\circled1}$ Mylar strip (no treatment). $^{\circled2}$ Sof-Lex XT system, $^{\circled3}$ PoGo system. Average surface roughness(Ra) was taken using a surface profilometer at the time of setting and after immersion into 0.02N lactic acid for 1 week and 1 month. Representative specimens were examined by scanning electron microscopy. The data were analyzed using ANOVA and Scheffe's tests at 0.05% significance level. The results were as follows：1. Mylar strip resulted in smoother surface than PoGo and Sof-Lex system (p<0.001). Sof-Lex system gave the worst results. 2. Tetric Ceram was smoother than DenFil and Z250 when cured under only mylar strip. However, it was significantly rougher than other materials when polished with PoGo system. 3. All materials showed rough surface after storage in 0.02N lactic acid, except groups polished with a PoGo system. The PoGo system gave a superior polish than Sof-Lex system for the three composites. However. the correlation to clinical practice may be limited, since there are several processes. such as abrasive, fatigue, and corrosive mechanisms. Thus. further studies are needed for polishing technique under in vivo conditions.

• 한국표면공학회지
• /
• 제49권4호
• /
• pp.331-338
• /
• 2016

In this work, anodic oxidation behavior of AZ31 Mg alloy was studied as a function of $Na_2CO_3$ concentration in electrolyte by voltage-time curves and observation of surface appearances and morphologies after the anodic treatments, using optical microscopy and confocal scanning laser microscopy (CSLM). The voltage-time curves of AZ31 Mg alloy surface and surface appearances after the anodic treatments showed three different regions with $Na_2CO_3$ concentration : region I, below 0.2 M $Na_2CO_3$ where shiny surface with a number of small size pits; region II, between 0.4 M and 0.6 M $Na_2CO_3$ where dark surface with relatively low number of large size burned or dark spots; region III, more than 0.8 M $Na_2CO_3$ where bright surface with or without large size dark spots were obtained. The anodically treated AZ31 Mg alloy surface became significantly brightened with increasing $Na_2CO_3$ concentration from 0.5 M to 0.8 M which was attribute to the formation of denser and smoother surface films. Pits and porous protruding reaction products were found at relatively large size and small size spots, respectively, on the AZ31 Mg alloy surface in low concentration of $Na_2CO_3$ less than 0.2 M. The formation of pits is attributed to the result of repetition of the formation and detachment of porous anodic reaction products. Based on the experimental results obtained in this work, it is concluded that more uniform, denser and smoother surface of AZ31 Mg alloy could be obtained at more than 0.8 M $Na_2CO_3$ concentration if there is no other oxide forming agent.

• 수산해양기술연구
• /
• 제54권4호
• /
• pp.271-278
• /
• 2018

In this study, the conventional cylinder-shaped lower bar on the canvas was modified and its performance was tested to improve the opening force of the stow net on anchor. The improved new lower bar used in the test is consisted of 13 flat bars with a length of 1.8 m, a width of 0.075 m and a thickness of 4 mm, and a pipe with a length of 2.0 m and a diameter of 50 mm. A stow net with the improved lower bar and a stow net with an existing lower bar were installed underwater and their trajectories for 21 hours were examined. To confirm their trajectories, GPS loggers were attached to the buoys on the left and right canvases and the buoy of the hauling rope. As a result of the test, the rotation of the gear with the improved bar was smoother than that with the existing bar. As a result of comparing the changes in the interval of the buoys attached to the canvas after the low and high tide, the buoy spacing of the gear with the improved bar is wider than that of the conventional gear; moreover, the larger the interval, the smoother the rotation of the fishing gear was. Therefore, it is considered that using the improved lower bar can enhance the performance of the stow net.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1707-1709
• /
• 1999

Insulating thin films for strain gauge application, such as $SiO_2$ single layers and $SiO_2/Si_3N_4$ multilayers, are deposited by using both PECVD and RF magnetron sputtering techniques. Micro-structural analysis and electrical characterization are carried out on those films. It has been observed that PECVD films have a smoother surface and a denser micro-structure than sputter films. It should be also found out that the electrical insulation property of $SiO_2$ film can be significantly improved by adding the $Si_3N_4$ layer.

• 한국항해항만학회지
• /
• 제30권9호
• /
• pp.749-754
• /
• 2006

The maritime logistics environment including seaborne trade, shipping and ports is changing rapidly and continuously. Large containerships, mega carriers and global terminal operators try to achieve economies of scale and economies of scope. As a result of the changing environment, the competition between ports to achieve competitiveness is intensive. Port competition among China, Japan and Korea is becoming fiercer, both directly and indirectly, resulting from the increased trade in northeast Asia. Port development projects within each country stimulate more intensive port competition. As a result, overcapacity, fierce price competition and overlapping hinterland problems will be caused in the future. Co-operation for survival is considered as a strategy in order to solve anticipated problems caused by port competition Busan port, for instance, could co-operate with China and Japan as well as with other ports in Korea Terminal operators' expansion through investments including joint-ventures will make connections between ports smoother. At the port authority level, continuous cooperative interchange between countries is indispensable.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.11-18
• /
• 2005

The traditional method of manipulation of knots and degrees gives poor quality of surface, if compatibility of input curves is not good enough. In this work, a new algorithm of multiple refitting of curves has been developed using minimum energy based formulation to get compatible curves for skinning. The present technique first reduces the number of control points and gives smoother surface for given accuracy and the surface obtained is then skinned by compatible curves. This technique is very useful to reduce data size when a large number of data have to be handled. Energy based technique is suitable for approximating the missing data. The volumetric information can also be obtained from the surface data for analysis.

• E2M - 전기 전자와 첨단 소재
• /
• 제16권9호
• /
• pp.62.2-62
• /
• 2003

Material Characteristics of zirconium oxide thin films obtained by plasma enhanced chemical vapor deposition on p-type Si(100) substrates were investigated to explain their unable electrical properties. The films obtained without heating had polycrystalline nanograins that are mostly of a tetragonal phase under oxygen-deficient plasma conditions but transformed into a monoclinic phase with increasing $O_2$ addition in the plasma. Mostly amorphous bulk $ZrO_2$ with a relatively thicker and smoother interfacial layer was obtained from oxygen-rich plasmas, resulting in a decrease in both the overall dielectric constant and the leakage current density. the interfacial layer formed between the bulk $ZrO_2$ and Si substrate was analyzed to be zirconium silicate, which approached $SiO_2$ as its zirconium content decreased with the increasing gas phase $O_2$ content.