• 제목/요약/키워드: Smooth area

검색결과 468건 처리시간 0.014초

방향성 정보 척도를 이용한 적응적 다단 메디안 필터에 관한 연구 (A study on Adaptive Multi-level Median Filter using Direction Information Scales)

  • 김수겸
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권4호
    • /
    • pp.611-617
    • /
    • 2004
  • Pixel classification is one of basic image processing issues. The general characteristics of the pixels belonging to various classes are discussed and the radical principles of pixel classification are given. At the same time. a pixel classification scheme based on image direction measure is proposed. As a typical application instance of pixel classification, an adaptive multi-level median filter is presented. An image can be classified into two types of areas by using the direction information measure, that is. smooth area and edge area. Single direction multi-level median filter is used in smooth area. and multi-direction multi-level median filter is taken in the other type of area. What's more. an adaptive mechanism is proposed to adjust the type of the filters and the size of filter window. As a result. we get a better trade-off between preserving details and noise filtering.

3차원 스캔한 인체 샅부위의 결측부위 복원 방법 비교 (Comparison of the Editing Method of Missing Area in 3D Scanned Image of Men's Crotch)

  • 김소영;홍경희
    • 한국의류학회지
    • /
    • 제33권3호
    • /
    • pp.401-409
    • /
    • 2009
  • The shape of crotch area is very important to develop functional clothing as well as other ergonomic goods such as chair or saddle etc. However, it is inevitable that 3D scanned image of crotch would have missing part due to its folded shape including overlapping legs nearby. Therefore, the objectives of this research was to compare reconstruction methods of missing parts at crotch using seven dummies of real men's replicas. Two reconstruction methods adopted were kinds of 'fill- hole' in Rapidform 2004, one was 'smooth' and the other was 'curvature'. Each restored image was compared with the original shape of the dummies. As results, the average distance was 0.66mm between original and 'smooth' treated images and 0.59mm between original and 'curvature' treated, which was not statistically different. Average area of restored crotch region was $8740.04cm^2$ by 'smooth' method and $8405.02cm^2$ by 'curvature' method which is close to the original area of $8413.76cm^2$. Statistical difference was found between images of original and 'smooth' ones$(p=0.04^*)$. However, there was no difference between original and 'curvature' treated images, which indicates that 'curvature' method is more useful to fill the hole compared with 'smooth' method.

삼차원 원형주상체의 축방향 직경변화가 열.유동장에 미치는 영향 (CHARACTERISTICS OF THE FLOW AND HEAT TRANSFER AROUND A WAVY CYLINDER)

  • 이창열;서장훈;윤현식;전호환
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 학술대회
    • /
    • pp.131-136
    • /
    • 2008
  • Three-dimensional characteristics of fluid flow and heat transfer around a wavy circular cylinder having sinusoidal variation in cross sectional area along the spanwise direction are numerically investigated using the immersed boundary method. The three different wavelengths of ${\pi}/4$, ${\pi}/3$ and ${\pi}/2$ and at the fixed wavy amplitude of 0.1 have been considered to investigate the effects of waviness on especially the forced convection heat transfer around a wavy cylinder when the Reynolds and Prandtl numbers are 300 and 0.71, respectively. The present computational results for a wavy cylinder are compared with those for a smooth cylinder. The time- and total surface-averaged Nusselt number for a wavy cylinder with is larger than that for a smooth cylinder, whereas that with ${\lambda}={\pi}/4$ and ${\pi}/3$ is smaller than that for a smooth cylinder. However, because the surface area exposed to heat transfer for a wavy cylinder is larger than that for a smooth cylinder, the total heat transfer rate for a wavy cylinder with different wavelengths of ${\lambda}={\pi}/4$, ${\pi}/3$ and ${\pi}/2$ is larger than that for a smooth cylinder.

  • PDF

안면부에 발생한 혈관근종의 치험례 : 증례보고 (Angiomyoma on Face : A Case Report)

  • 최준호;장학
    • 대한두경부종양학회지
    • /
    • 제29권2호
    • /
    • pp.48-50
    • /
    • 2013
  • Angiomyoma is a rare, benign smooth muscle cell tumor. These tumors may be found anywhere in the body. They frequently occur in the lower extremities except venous type. Angiomyoma in the head and neck area is very rare, and only a few cases have been reported. A 63 year-old male patient visited to outpatient clinic due to size-growing nodule-like lesion in the Lt. alar area. Excisional biopsy was done for diagnosis. The lesion was totally excised with 2 mm safety margin. Frozen biopsy of the lesion was requested, and all resection margins were proved negative. To cover the raw surface, full thickness skin grafting was performed. The graft was harvested from Rt. posterior auricular area. Tie over dressing was applyed on Lt. alar area. The graft was well taken and healed without any complication in both short term and long term follow up periods of 2 weeks, 1 month, 2 months, and 6 months. Donor site completed healed without any complications. The leiomyoma is benign tumor originated from smooth muscle, and it can be classified into solid leiomyoma, angiomyoma, and epithelioid leiomyoma. Especially, the angiomyoma consists of smooth muscle cell and blood vessel, and it is originated from the tunica media of blood vessel. Angiomyoma alone frequently occurs in the lower extremities as solitary painless subcutaneous tumor. Venous type of angiomyoma in the oral cavity was reported in other references, but on the facial surface it may be the first case reported as paper. So this report can be very meaningful.

수평단관 상의 유하액막 열전달 (Falling Film Heat Transfer on a Horizontal Single Tube)

  • 김동관;김무환
    • 설비공학논문집
    • /
    • 제12권7호
    • /
    • pp.642-648
    • /
    • 2000
  • Falling film heat transfer analyses with aqueous lithium bromide solution were peformed to investigate the transfer characteristics of the copper tubes. Finned(knurled) tube and a smooth tube were selected as test specimens. Averaged generation fluxes of water and the heat transfer performances(heat flux, heat transfer coefficient) were obtained. The results of this work were compared with the data reported previously. As the film flow rate of the solution increased, the generation fluxes of water decreased for both tubes. The reason is estimated by the fact that the heat transfer resistance with the film thickness increased as the film flow rate increased. The effect of the enlarged surface area at the knurled tube was supposed to be dominant at a small flow rate. The generation fluxes of water increased with the increasing degree of tube wall superheat. Nucleate boiling is supposed to occur at a wall superheat of 20 K for a smooth tube, and at 10 K for a knurled tube. The heat transfer performance of the falling film was superior to pool boiling at a low wall superheat below 10 K for both tubes tested. The knurled tube geometry showed good performance than the smooth tube, and the increased performance was mainly came from the effect of the increased heating surface area.

  • PDF

접촉 면적과 접촉면 압력분포에 대한 마찰의 영향 (The Effects of Friction on the Contact Area and the Distribution of Contact Pressure)

  • 이문주;조용주
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1999년도 제30회 추계학술대회
    • /
    • pp.193-199
    • /
    • 1999
  • In the 3-Dimensional contact of the smooth spheres, the effects of friction on the contact area and the distribution of contact pressure was studied numerically. The contact area and pressure distribution was evaluated for the only normal load and for the case of a normal load in the presence of a tangential traction. To do this work, the technique of simple discretization using the load . displacement relationship for a uniformly distributed load of a rectangular patch was used.

  • PDF

고용량 스테가노그래픽 방법 연구 (High Capacity Steganographic Method)

  • 김기종;정기현;유기영
    • 한국인터넷방송통신학회논문지
    • /
    • 제9권5호
    • /
    • pp.155-161
    • /
    • 2009
  • 본 논문은 이미지 픽셀의 픽셀값 차이(Pixel-value Differencing: PVD)와 최하위 비트(Least Significant Bit: LSB) 교체 방법을 이용하여 원본 이미지의 픽셀값 성질에 맞게 적용하여 고용량의 데이터를 이미지에 숨길 수 있는 방법을 제시한다. 기존에 LSB와 PVD 방법에 근거하여 비밀 자료를 숨기고, 숨겨진 자료를 감지할 수 없도록 하기 위해 많은 자료 은닉 방법들이 연구되었다. 두 연속된 픽셀값 차이가 적을 경우에는 부드러운 영역(Smooth Area)에 속하게 되고, 두 픽셀값 차이가 클 경우에는 경계 영역(Edge Area)에 속한 픽셀로 구별되는데, 본 논문에서 제시하는 방법은 이미지의 부드러운 영역과 경계 영역을 감지하여 부드러운 영역에는 LSB 교체 방법을 적용하고, 경계 영역에는 픽셀값 차이를 이용한 방법을 적용하였다. 실험 결과에서는 본 논문에서 제시한 방법이 기존의 LSB교체 기법을 이용하거나 픽셀값 차이를 이용한 자료은닉 방법에 비해 숨길 수 있는 자료량과 스테고 이미지(Stego-image)의 품질 측면에서 우수함을 보이고 있다.

  • PDF

소(牛)의 제1위 평활근 운동성에 대한 histamine의 효과 (Effects of histamine on the ruminal smooth muscle motility of cattle)

  • 윤병철;한호재;한방근
    • 대한수의학회지
    • /
    • 제34권3호
    • /
    • pp.471-478
    • /
    • 1994
  • Effects of histamine on the ruminal smooth muscle motility of cattle were investigated in the longitudinal and circular smooth muscle strips. In order to these experiments, specimens were obtained from 35 korean native cattles, 3-4 years old, in Kwang-ju area slaughterhouse. Smooth muscle strips of rumen were made from sample, and then measured the isometric contraction with physiograph in $37{^{\circ}C}$ organ bath. The results were as follows : 1. Histamine caused two different types of response(a contraction or a relaxation) on the smooth muscle of cattle rumen. These responses increased in dose dependant manner. 2. Pyrilamine($H_1$-receptor antagonist) completely blocked contraction in all the preparation and converted the response into relaxation. 3. Cimetidine($H_2$-receptor antagonist) completely blocked relaxation in all the preparation and converted the response into contraction. 4. The contraction induced by histamine($10^{-3}M$) was not Mocked by cholinergic, adrenergic blocker or hexamethonium. 5. The contraction induced by histamine($10^{-3}M$) was markedly inhibited in the $Ca^{2+}$ free(or EDTA 2Na) Kreb's solution and by verapamil.

  • PDF

Some Aspects of Experimental in-Tube Evaporation

  • Ha, Sam-Chul
    • Journal of Mechanical Science and Technology
    • /
    • 제14권5호
    • /
    • pp.537-546
    • /
    • 2000
  • The heat transfer characteristics of refrigerant-oil mixture for horizontal in-tube evaporator have been investigated experimentally. A smooth copper tube and a micro-fin tube with nominal 9.5 mm outer diameter and 1500 mm length were tested. For the pure refrigerant flow, the dependence of the axial heat transfer coefficient on quality was weak in the smooth tube, but in the micro-fin tube, the coefficients were 3 to 10 times greater as quality increases. Oil addition to pure refrigerant in the smooth tube altered the flow pattern dramatically at low mass fluxes, with a resultant enhancement of the wetting area by vigorous foaming. The heat transfer coefficients of the mixture for low and medium qualities were increased at low mass fluxes. In the micro-fin tube, however, the addition of oil deteriorates the local heat transfer performance for most of the quality range, except for low quality. The micro-fin tube consequently loses its advantage of high heat transfer performance for an oil fraction of 5%. Results are presented as plots of local heat transfer coefficient versus quality.

  • PDF

DYNAMICS ON AN INVARIANT SET OF A TWO-DIMENSIONAL AREA-PRESERVING PIECEWISE LINEAR MAP

  • Lee, Donggyu;Lee, Dongjin;Choi, Hyunje;Jo, Sungbae
    • East Asian mathematical journal
    • /
    • 제30권5호
    • /
    • pp.583-597
    • /
    • 2014
  • In this paper, we study an area-preserving piecewise linear map with the feature of dangerous border collision bifurcations. Using this map, we study dynamical properties occurred in the invariant set, specially related to the boundary of KAM-tori, and the existence and stabilities of periodic orbits. The result shows that elliptic regions having periodic orbits and chaotic region can be divided by smooth curve, which is an unexpected result occurred in area preserving smooth dynamical systems.