• 제목/요약/키워드: Smoke extraction

검색결과 64건 처리시간 0.028초

스크린도어 설치에 따른 지하승강장 제연의 문제점과 대책 - 부산 지하철 3호선을 중심으로 - (Smoke Control in a Subway Station Platform with Screen Doors - Based on Busan Subway Line 3 -)

  • 박외철
    • 한국화재소방학회논문지
    • /
    • 제20권1호
    • /
    • pp.50-54
    • /
    • 2006
  • 스크린 도어로 격리된 지하철 역 승강장의 제연의 문제점을 조사하고 그 대책을 마련하기 위해 승강장 일부에 대하여 수치해석을 수행하였다. 바닥면적 $40m{\times}5m$, 높이 3m의 구역에 1 MW의 화재가 발생하고 배기방식의 제연설비가 작동하는 것으로 가정하였다. 세가지 배기풍량 0.1, 2.0, $4.0m^3/min-m^2$에 대해 온도와 연기의 농도, 일산화탄소의 농도, 가시거리의 분포를 비교하였다. 또 배기풍량에 따른 제연성능을 알아보기 위해 무작위분포 입자수의 시간 변화율도 조사하였다. 급기풍량이 적은 경우에는 공기의 공급부족으로 제연에 시간이 많이 소요되는 것으로 나타났다. 화재시에는 선로에서 승강장으로 자연급기가 가능한 구조로 하여, 제연이 효율적으로 이루어지게 할 필요가 있으며, 기존의 부산 지하철 3호선 지하역 승강장에는 비상시에 화재가 완전히 소화될 때까지 승강장과 선로간의 문을 개방해두는 것이 바람직함을 확인하였다.

승강장 스크린도어 설치에 따른 배연설비운영에 대한 연구 (A Study of Smoke Exhaust Facility Operation of Subway Platform with Installation of Platform Screen Door)

  • 이동호;고재웅;김하영
    • 한국안전학회지
    • /
    • 제21권1호
    • /
    • pp.35-40
    • /
    • 2006
  • A study on fire phenomena in a subway transit mass station has been carried out as a part of disaster prevention plan at the subway station. The ventilation facilities installed in both the platform and the trackway are designed to convert into a smoke exhaust system in emergency situation, creating such an environment as necessary for evacuation. 3 dimensional Numerical Simulations based on the CFD are carried out using a simulation tool, Fire Dynamic Simulator. Additionally, four different vent modes are made and performances are compared with the original design mode and each other to find better operation of vents at both the platform and the trackway in case of fire. From the result, an vent operational characteristics under the condition of installed PSD is clarified for the effective smoke and heat removal from the platform area compared with non installed PSD.

Determination of Formaldehyde in Cigarette Smoke and Inhibitory Effect of Plant Volatile Extracts on the Formation of Formaldehyde

  • Her, Jae-Young;Jang, Hae-Won;Lee, Kwang-Geun
    • Food Science and Biotechnology
    • /
    • 제18권2호
    • /
    • pp.471-474
    • /
    • 2009
  • Formaldehyde (FA) is a carcinogenic compound present in cigarette smoke. In this study, the amount of formaldehyde was analyzed in 5 kinds of cigarettes and the inhibitory effect of plant volatile extracts on the formation of FA was investigated. After extraction of the cigarette sample, FA was converted into its thiazolidine derivatives by reaction with cysteamine, and then measured using a gas chromatography-nitrogen phosphorus detector (GC-NPD). The concentrations of FA in cigarette smoke were found between 138.24 and $217.82{\mu}mol/g$ cigarette smoke. Extracts isolated from Welsh onion (Allium cepa L.), garlic (Allium sativum L.), crown daisy (Chrylsanthemum coronarium L.), green pepper (Capsicum annuum L.), and sesame dropwort (Oenanthe javanica DC) were used for analyzing their inhibitory effects on the formation of FA. The inhibitory effects of extracts of Welsh onion, garlic, crown daisy, green pepper, and sesame dropwort on the formation of FA were 64, 47, 38, 47, and 19%, respectively.

Smoke detection in video sequences based on dynamic texture using volume local binary patterns

  • Lin, Gaohua;Zhang, Yongming;Zhang, Qixing;Jia, Yang;Xu, Gao;Wang, Jinjun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권11호
    • /
    • pp.5522-5536
    • /
    • 2017
  • In this paper, a video based smoke detection method using dynamic texture feature extraction with volume local binary patterns is studied. Block based method was used to distinguish smoke frames in high definition videos obtained by experiments firstly. Then we propose a method that directly extracts dynamic texture features based on irregular motion regions to reduce adverse impacts of block size and motion area ratio threshold. Several general volume local binary patterns were used to extract dynamic texture, including LBPTOP, VLBP, CLBPTOP and CVLBP, to study the effect of the number of sample points, frame interval and modes of the operator on smoke detection. Support vector machine was used as the classifier for dynamic texture features. The results show that dynamic texture is a reliable clue for video based smoke detection. It is generally conducive to reducing the false alarm rate by increasing the dimension of the feature vector. However, it does not always contribute to the improvement of the detection rate. Additionally, it is found that the feature computing time is not directly related to the vector dimension in our experiments, which is important for the realization of real-time detection.

Measurement Uncertainty of Nicotine in Environmental Tobacco Smoke (ETS)

  • Lee, Jeong-Il;Lee, Cheol Min;Shim, In-Keun;Kim, Seong-Mi;Lee, Woo-Seok;Kim, Yoon-Shin
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권8호
    • /
    • pp.2394-2398
    • /
    • 2013
  • Nicotine is the main component of environmental tobacco smoke, and its presence in indoor air is widely used as a secondhand-smoke indicator. Environmental tobacco smoke is a major source of indoor air pollution, but sufficient investigation of the uncertainty of its measurement, which mirrors the reliability of nicotine measurement, has not been performed. We calculated the uncertainty of measurement of indoor air nicotine concentration at low, medium, and high concentrations of 11.3798, 10.1977, $98.3768{\mu}g/m^3$, respectively, and we employed the Guide to the Expression of Uncertainty in Measurements (GUM), proposed by the International Organization for Standardization (ISO). The factors considered in determining the uncertainty were uncertainty of the calibration curve (calibration curve and repeated measurements), desorption efficiency, extraction volume, and sampling airflow (accuracy and acceptable limits of flowmeter). The measurement uncertainty was highest at low concentrations; the expanded measurement uncertainty is $0.9435{\mu}g/m^3$ and is represented as a relative uncertainty of 63.38%. At medium and high (concentrations, the relative uncertainty was 13.1% and 9.1%, respectively. The uncertainty of the calibration curve was largest for low indoor nicotine concentrations. To increase reliability of measurement in assessing the effect of secondhand smoke, measures such as increasing the sample injection rate ($1{\mu}L$ or more), increasing sampling volume to increase collected nicotine, and using gas chromatography-mass spectrometry (GC/MS) or GC/MS/MS, which has a lower quantitation threshold, rather than gas chromatography with nitrogen phosphorous detector, should be considered.

차이값 추출 및 장면 전환 검출에 의한 승강기에서 흡연 추출 (Smoking Detection in Elevator Using Difference Value Extraction and Scene Change Detection)

  • 신성윤;김창호;이현창
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 추계학술대회
    • /
    • pp.250-251
    • /
    • 2013
  • 본 논문에서는 이러한 범죄 행위인 흡연을 엘리베이터 내에서 행하는 범죄자를 추출하고자 한다. 추출 방법은 변형된 컬러-$X^2$-test를 이용하여 차이값을 추출하고, 이를 정규화 한다. 다음으로, 4-단계의 장면 전환 검출 알고리즘을 이용하여 연속적인 프레임들에서 장면 전환이 발생한 지점을 찾아낸다. 마지막으로, 비디오에 저장된 대량의 영상에서 흡연 영상의 검색 및 추출을 위한 방법을 제시한다.

  • PDF

담배 연기 내 PAH의 유리입자에 대한 흡착거동 - 플라즈마 고분자 중합 코팅 영향 (Adsorption Behavior of PAHs in Cigarette Smoke on Glass Beads - Effect of Plasma Polymerization Coating)

  • ;이문수;이영택;윤태호
    • 접착 및 계면
    • /
    • 제11권4호
    • /
    • pp.137-143
    • /
    • 2010
  • Glass beads (GBs) were modified via plasma polymerization coatings in order to enhance the adsorption of polycyclic aromatic hydrocarbons (PAHs) in cigarette smoke and activated carbons (ACs) were also utilized for comparative purposes. First, GBs and ACs were subjected to surface modification via plasma polymerization coating of acrylic acid, acrylonitrile, 1,3-diaminopropane, thiophene or dimethylphosphite with a RF plasma (13.56 MHz) generator. Next, their adsorption behavior was evaluated with a home-made 4-port smoking machine by collecting the total particulate matters (TPMs) on a Cambridge filter pad, followed by the separation of PAHs via solid phase extraction and analysis with GC/MS. Finally, the plasma polymerization coatings were analyzed by FT-IR/ATR to elucidate the adsorption mechanism, while the topology of the modified GBs and ACs were studied by FE-SEM.

담배 이분 중 Essential Oil의 활용 연구 (제1보) - 정유의 향끽미 증진 성분에 관하여 - (A Study on the Use of Essential Oil from Tobacco Powder (I) - On the Flavouring Agent in Essential Oil Components -)

  • 이경구;박진우
    • 한국연초학회지
    • /
    • 제4권2호
    • /
    • pp.67-73
    • /
    • 1982
  • Essential oil components from tobacco powder were investigated as flavouring agent. The essential oil was isolated from tobacco powder by a simple distillation /extraction method The extracted essential oil was fractionated into basic, acidic and neutral groups. And the neutral group of essential oil was separated by column chromatography into 10 fractions. Above groups and fractions were tested for tobacco aroma and smoke aroma. The neutral group except most nonpolar fraction displays good flavouring properties which make them highly suitable for improving the flavour and aroma of tobacco and tobacco smoke. The most nonpolar fraction from neutral group was carefully investigated using preparative column, thin layer and gas chromatography ailed by GC/MS coupling. The major subfraction was identified as hydrocarbons on the basis of the IR spectrum. The 58 hydrocarbon components were identified by their mass spectra and was chromatographic retention times.

  • PDF

Study on Disaster Prevention in Case of Fire at Subway Platform with Platform Screen Door

  • Rie, Dong-Ho;Yoon, Sung-Wook;Ko, Jae-Woong;Lee, Keun-Oh
    • International Journal of Safety
    • /
    • 제4권2호
    • /
    • pp.36-42
    • /
    • 2005
  • A study on fire phenomena in a subway transit mass station has been carried out as a part of disaster prevention plan at the subway station. The ventilation facilities installed in both the platform and the trackway are designed to convert into a smoke exhaust system in emergency situation, creating an environment necessary for evacuation. 3 dimensional Numerical Simulations based on the CFD are carried out using a simulation tool, Fire Dynamic Simulator. Total of six different cases are made and performances are compared each other to find optimal vents operation to ensure safer environment for evacuation at the platform area considering the installation of platform screen door.