• 제목/요약/키워드: Smith chart

검색결과 23건 처리시간 0.022초

지수선로의 도식해법

  • 박송배
    • 전기의세계
    • /
    • 제9권
    • /
    • pp.18-22
    • /
    • 1962
  • 지수선로는 특히 microwave공학에서 Impedance 변환용으로 널리 사용되고 있으나 그 Impedance 함수 또는 반사계수의 표시식의 복잡성으로 인하여 이 선로의 특성연구, 설계에 있어서 적지 않은 계산의 곤란이 따른다. 따라서 이의 도식해법이 환영된다. 본논문에서 우리는 지수선로의 Impedance함수를 일차변환하면 보통의 균일선로에 대한 것과 유사한 표시식이 얻어짐에 착안하여 복소수의 일차변환을 대표하는 W-평면과 Smith chart 또는 직교 Impedance diagram을 병용하던지 W-평면을 직교 Impedance diagram에 중첩시키던지 또는 Smith chart의 constant-r constant-x도의 label를 고쳐서 사용하던지 하여 지수선로의 문제를 도식으로 해결하는 방법을 모색하였다. 또 같은 착안으로부터 지수선로의 집중정수 등가회로가 흥미있게 구해짐을 부수적으로 지적하였다.

  • PDF

스미스 차트를 이용한 구리 인터커텍트의 비파괴적 부식도 평가 (Nondestructive Quantification of Corrosion in Cu Interconnects Using Smith Charts)

  • 강민규;김남경;남현우;강태엽
    • 마이크로전자및패키징학회지
    • /
    • 제31권2호
    • /
    • pp.28-35
    • /
    • 2024
  • 전자패키지 내부의 부식이 시스템 성능 및 신뢰성에 큰 영향을 미치고 있어, 시스템 건전성 관리를 위해 부식에 대한 비파괴적 진단 기법의 필요성이 커지고 있다. 본 연구에서는 복소 임피던스의 크기와 위상을 통합적으로 시각화하는 도구인 스미스 차트를 활용하여, 구리 인터커넥트의 부식을 비파괴적으로 평가하는 방법을 제시하고자 한다. 실험을 위해 구리 전송선을 모사한 시편을 제작하고, MIL-STD-810G 기준 온습도 사이클에 노출시켜 시편에 부식을 인가하였다. R 채널 기반 색변화로 시편의 부식도를 정량적으로 평가하고 레이블링 하였다. 부식의 성장에 따라 시편의 S-파라미터와 스미스 차트를 측정한 결과, 5 단계의 부식도에 따라 유의미한 패턴의 변화가 관찰되어, 스미스 차트가 부식도 평가에 효과적인 도구임을 확인하였다. 더 나아가 데이터 증강을 통해 다양한 부식도를 갖는 4,444개의 스미스 차트를 확보하여, 스미스 차트를 입력 받아 구리 인터커넥트의 부식 단계를 출력하는 인공지능 모델을 학습시켰다. 이미지 분류에 특화된 CNN 및 Transfomrer 모델을 적용한 결과, ConvNeXt 모델이 정확도 89.4%로 가장 높은 부식 진단 성능을 보였다. 스미스 차트를 이용하여 전자패키지 내부 부식을 진단할 경우, 전자신호를 이용하는 비파괴적 평가를 수행할 수 있다. 또한. 신호 크기와 위상 정보를 통합적으로 시각화 하여 직관적이며 노이즈에 강건한 진단이 가능할 것으로 기대한다.

HFSS를 이용한 UHF RFID 세라믹 안테나 개발 (Development of UHF RFID Ceramic Antenna Using HFSS)

  • 황기현;차경환
    • 한국정보통신학회논문지
    • /
    • 제13권1호
    • /
    • pp.193-198
    • /
    • 2009
  • 본 논문에서는 최근에 널리 사용되고 있는 RFID 설계 Tool인 HFSS를 이용하여 UHF RFID 세라믹 안테나를 개발하였다. 개발한 세라믹 안테나는 HFSS를 이용하여 반사손실(Return Loss)과 스미스 차트(Smith Chart)를 통해 특성을 분석하였다. HFSS 설계를 바탕으로 세라믹 안테나를 제작하였고, 네트워크 분석기(Network Analyzer)를 이용하여 임피던스 매칭과 이득을 측정하여 성능을 분석하였다. 그리고 UHF RFID 휴대용 단말기에 세라믹 안테나를 부착하여 일반적으로 널리 사용되는5가지 형태의 RFID 태그(Tag)에 대해서 거리측정을 실시하여 그 성능을 입증하였다.

Modified Smith-Chart Representation on the Basis of the Dynamic Permittivity of a Microstrip Structure

  • Charoenwattanaporn, Monton;Goenchanart, Ut;Malisuwan, Settapong;Ungvichian, Vichate
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -1
    • /
    • pp.512-514
    • /
    • 2002
  • The dynamic permittivity of a microstrip structure leads to a convenient and modified Smith-chart representation that includes the frequency-dependent influence of the lossy characteristics of the line cohesively. The efficacy of the model is illustrated with an example concerning a microstrip patch antenna. Relevant simulations show that the input impedances calculated from the model are more accurate than those from the previous model in the literature by comparing to the measure results, as illustrated with an example of a patch antenna. This model is compatible for CAD efforts with MATLAB$\^$TM/ facilitation fast and user-friendly implementations.

  • PDF

부하가 있는 전송 선로의 입력 반사 게수의 스미스 차트 상에서의 쾌적 (On the Loci of the Input Reflection Coefficient of a Loaded Transmission Line on the Smith Chart)

  • 은창수
    • 한국통신학회논문지
    • /
    • 제28권4A호
    • /
    • pp.232-237
    • /
    • 2003
  • 이 논문에서는 부하가 걸려 있는 전송 선로의 길이가 변화할 경우 입력반사 계수가 스미스차트 상에서 그리는 쾌적의 방정식을 유도한다. 결과에 따르면, 전송 선로의 특성 임피던스가 정규화 임피던스와 다를 경우 쾌적은 원을 그리게 되며, 그 원의 중심과 반지름은 부하의 임피던스와 전송 선로의 특성 임피던스에 의해 결정된다. 이 결과는 마이크로스트립 선로를 사용하여 정합 회롤를 설계할 때 선로의 길이와 너비를 조정할 필요가 있을 경우 유용하게 사용될 수 있다.

손실결합 공동공진기의 간편한 Q 측정 방법 (A simple Q measurement method of a lossy coupled cavity resonator)

  • 한대현
    • 한국정보통신학회논문지
    • /
    • 제22권7호
    • /
    • pp.1015-1020
    • /
    • 2018
  • 공동공진기는 마이크로파 응용에서 많이 사용되는 부품 중의 하나이다. 무부하 Q, 공진주파수, 그리고 결합계수는 공진기 기본 파라미터이다. 손실결합이 있는 공동공진기의 무부하 Q를 측정하는 간편한 절차를 제안하였다. 공진주파수 근처 주파수 대역에서 결합손실을 포함한 등가회로를 보였으며, 결합손실은 공진기의 임피던스를 측정하여 구했다. 결합손실을 보상한 공진기의 임피던스를 스미스차트에 다시 그렸다. 보상한 임피던스 궤적에서 부하 Q와 결합계수를 구하여 무부하 Q를 계산하였다. 제안한 절차를 검증하기 위하여 결합 손실이 없는 공진기를 측정하였다. 결합 손실이 있는 경우와 손실이 없는 경우의 측정결과는 잘 일치 하였다. 측정된 결과는 제안한 절차가 유용함을 확인하였다.

미맹출 영구치 폭경예측방법의 정확도에 관한 비교연구 (A COMPARATIVE STUDY ON THE ACCURACY OF PREDICTION METHODS OF UNERUPTED CANINE AND PREMOLARS IN THE MIXED DENTITION)

  • 이은영;최영철
    • 대한소아치과학회지
    • /
    • 제23권4호
    • /
    • pp.788-799
    • /
    • 1996
  • The purpose of this study was to determine the accuracy of the prediction methods which are frequently used in the clinic, such as Moyers', Tanaka and Johnston's, Song's Hixon and Oldfather's, Kaplan's, Smith's. These prediction methods were compared to the data, which were obtained from 100 Kyung-Hee University students (50 males and 50 females) with normal occlusion of permanent dentition, using a retrospective statistical analysis. The standard periapical radiopgraphs for the lower premolars using 16-inch long cone technique and the yellow stone dental casts were taken from each samples. The mesiodistal widths of 4 incisors, canine, premolars were measured on the dental casts, and those of premolars were measured on the radiographs. The correlation coefficients, paired samples t-tests, regression coefficients between the actual measuredments of the samples and the predicted measurements of each methods were analyzed. The results obtained were as follows: 1. The prediction methods using periapical radiographs tended to show a stronger correlation than the methods using dental casts; the correlation coefficients between the actual widths of the lower canine and premolars and the predicted widths of the tested methods were higher in Smith, Kaplan, Hixon & Oldfater, and Tanaka & Johnston (p<0.001). 2. The Moyers' probability chart at 65 % showed a tendency toward the least difference between the actual measurements and the predicted widths of the lower canine and the premolars, and the methods of Smith, Kaplan, Tanaka & Johnston also showed a less difference. 3. By means of evaluation in correlation coefficients and paired smaples t-tests, the Smith and Tanaka & Johnston in male, and the Moyers' 65 % and Song in female showed a high tendency toward accurate methods. 4. The regression equations by models that are derived from the study were as follows: Male(Lt.) :Y=10.799+0.475X Femle(Lt.) :Y= 7.427+0.609X (Rt.) :Y=11.043+0.462X (Rt.) :Y= 8.475+0.556X 5. The regression equations by radiographs that are dericed from the study were as follows: Male(Lt.) :Y=6.5651+0.9720X Femle(Lt.) :Y=4.8656+1.0632X (Rt.) :Y=7.8610+0.9060X (Rt.) :Y=4.5483+1.0843X

  • PDF

Measurement of Sonobuoy Transmitting Antenna System for Anti-Submarine Warfare

  • Min Kyeong-Sik
    • Journal of electromagnetic engineering and science
    • /
    • 제5권2호
    • /
    • pp.97-103
    • /
    • 2005
  • This paper describes the measured results of sonobuoy transmitting antenna system for anti-submarine warfare (ASW). Since radiation pattern and power density depend on impedance matching between transmitting RF part and antenna with termination resistance, design of matching circuit is very important for sonobuoy system performance. Matching circuit is designed by Smith chart using control of L and C. In standing wave ratio(SWR) measurement using Network Analyzer, SWR of antenna with matching circuit observed 1.5 below at the assigned VHF band. It shows very excellent performance comparison with conversional product that is used for the same object. The measured vertical and horizontal radiation patterns are also shown the satisfaction of military specifications. A drop out of sonobuoy system on the sea is happened when angle of elevation direction is over 10 degrees, and it is conformed that it takes less than I second return to original signal level. The required electric power density is $83\;mW/m^2$ in the military specification, and measured electric power density is observed over average $110\;mW/m^2$ at all frequency bands.

Ferroxplana/Rubher 복합형 전파흡수체의 제작 및 특성 (Fabrications and Properties of Ferroxplana/Rubber Composite for Electromagnetic wave Absorbers)

  • 박상하;사공건
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1993년도 추계학술대회 논문집
    • /
    • pp.71-74
    • /
    • 1993
  • In this paper, the permeability(${\mu}$$\sub$r′/, ${\mu}$$\sub$r"/), permittivity($\varepsilon$$\sub$r′/, $\varepsilon$$\sub$r"/) and absorption properties of Ferroxplana/Rubber composites were investigated. The composite specimens were prepared by molding and curing the mixtures of matrix rubber and Ni$_2$Y ferroxplana powders which were synthesized by coprecipitated method. The permeability(${\mu}$$\sub$r′/) of specimen was decreased in the range of 8∼12.5(GHz) and the permeability(${\mu}$$\sub$r"/) and Permittivity($\varepsilon$$\sub$r′/, $\varepsilon$$\sub$r"/) were increased. The optimum thickness of electromagnetic wave absorber (F/R=4, 1,200($^{\circ}C$) ), utilizing the Smith chart, was about 3.0(mm). The Figure of Merit was 93(%).

  • PDF

TDR 및 NA를 이용한 Chip Pin Parasitic 추출 (Chip Pin Parasitic Extraction by Using TDR and NA)

  • 이현배;박홍준
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 II
    • /
    • pp.899-902
    • /
    • 2003
  • Chip Pin Parasitic은 실제 Chip Pad에서부터 Bonding Wire를 통한 Package Lead Frame까지를 의미한다. 여기서, Lead Frame 및 Bonding Wire에서 Inductance 및 작은 저항이 보이고, Chip Pad에서의 Capacitance, 그리고 Pad 부터 Ground까지의 Return Path에서 발생하는 저항이 보인다. 이들을 모두 합하면 L, R, C의 Series로 나타낼 수 있다. 본 논문에서는 이런 Chip Pin Parasitic을 추출 하기 위해서 TDR(Time Domain Reflectometer)과 NA(Network Analyzer)를 사용하였는데, TDR의 경우 PCB를 제작하여 Chip을 Board위에 붙인 후 Time Domain에서 측정 하였고 NA의 경우 Pico Probe를 이용하여 Chip pin에 직접 Probing해서 Smith Chart를 통하여 Extraction 값을 추출했다. 이 경우, NA를 이용한 측정이 좀 더 정확한 Parasitic 값을 추출할 수 있으리라 예상되겠지만, 실제로 Chip이 구동하기 위해서는 Board위에 있을 때의 상황도 고려해야 하기 때문에 TDR 추출 값과 NA 추출 값을 모두 비교하였다.

  • PDF