• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.64-68
• /
• 2011

On the limited urban area, precise measurement of meteorological data is not easy for the cost problem. The facilities collecting the data require high installment costs. The mobile sources can be a solution in city region. For example, a public bus on which some meteorological sensors are installed can act as moving information gathering station. The information is gathered on a server and aggregated to generate useful information for smart phone application. To implement the services, several obstacles are exists. This paper studies on a design of this mobile meteorological information service system for urban area.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2013

This study analyzed passenger access and egress travel patterns related to a Korean regional railway station (Seoul station), then developed a binomial logit model. This model referred to bus and metro mode of access and egress during a national holiday (Chuseok 2009); obtained from transit smart card data. The results showed that 99% of passengers getting access to, or egress from, the regional railway station did so using less than two transfers, and that most passengers were more likely to choose a metro. However, the passengers that made access or egress trips near Seoul Station were more likely to take a bus. From the results of the mode choice model, it was found that the impact of travel time was greater than that of travel cost, in the choices made for both access and egress. Interestingly, the impact of travel time is much greater in choosing the mode of egress.

• Smart Media Journal
• /
• v.5 no.3
• /
• pp.42-48
• /
• 2016

Recently, most of the modern people used a second mobile device(two degree mobile device). Mobile devices are affecting all areas of human life, consumer electronics, transportation, manufacturing, and finance. On this paper, we propose a model-driven development based interaction model that can be used in the development of mobile payment system, which is the latest buzzword pins of the various application fields of mobile devices Tech (Fin-Tech) sector. Using a model-driven development based models do not depend on the Platforms (PIM), we propose a model for interaction between devices which can be reused when developing mobile billing app. A model-driven development based mobile applications use the reusable of interaction models development program analyzed the bus fees automatic payment application by a beacon.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.804-811
• /
• 2015

The presence of responsive loads in the promising active distribution networks (ADNs) would definitely affect the power system problems such as distributed generations (DGs) studies. Hence, an optimal procedure is proposed herein which takes into account the simultaneous placement of DGs and smart meters (SMs) in ADNs. SMs are taken into consideration for the sake of successful implementing of demand response programs (DRPs) such as direct load control (DLC) with end-side consumers. Seeking to power loss minimization, the optimization procedure is tackled with genetic algorithm (GA) and tested thoroughly on 69-bus distribution test system. Different scenarios including variations in the number of DG units, adaptive power factor (APF) mode for DGs to support reactive power, and individual or simultaneous placing of DGs and SMs have been established and interrogated in depth. The obtained results certify the considerable effect of DRPs and APF mode in determining the optimal size and site of DGs to be connected in ADN resulting to the lowest value of power losses as well.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.299-305
• /
• 2021

Dissolved oxygen, pH, and temperature are the most important factors for fish farming because they affect fish growth and mass mortality of the fish. Therefore, fish farm workers must always check all pools on the farm, but this is very difficult in reality. That's why we developed a control system for smart fish farms. This system includes a gateway, sensor gatherers, and a PC program using LabVIEW. One sensor gatherer can cover up to four pools. The sensor gatherers are connected to the gateway in the form of a bus. For the gateway, the ATmega2560 is used as the main processor for communication and the STM32F429 is used as a sub-processor for displaying LCD. For the sensor gatherer, ATmega2560 is used as the main processor for communication. MQTT (Message Queuing Telemetry Transport), RS-485, and Zigbee are used as the communication protocols in the control system. The users can control the temperature and the dissolved oxygen using the PC program. The commands are transferred from the PC program to the gateway through the MQTT protocol. When the gateway gets the commands, it transfers the commands to the appropriate sensor gatherer through RS-485 and Zigbee.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1096-1099
• /
• 2019

In this paper, we propose the protocol for construction of smart factory. The proposed protocol for construction of smart factory consists of an OPC UA Server/Client, a technology of TSN realtime communication, a NTP & PTP time synchronization protocol, a FieldBus protocol and conversion module, a technology of saving data for data transmit latency and synchronization protocol. OPC UA server/client is a system integration protocol which makes interface industrial hardware device and supports standardization which allows in all around area and also in not independent from any platform. A technology of TSN realtime communication provides an high sensitive time management and control technology in a way of sharing specific time between devices in the field of high speed network. NTP & PTP time synchronization protocol supports IEEE1588 standardization. A fieldbus protocol and conversion module provide an extendable connectivity by converting industrial protocol to OPC. A technology of saving data for data transmit latency and synchronization protocol provide a resolution function for a loss and latency of data. Results from testing agencies to assess the performance of proposed protocol for construction of smart factory, response time was 0.1367ms, synchronization time was 0.404ms, quantity of concurrent access was 100ea, quantity of interacting protocol was 5ea, data saving and synchronization was 1,000 nodes. It produced the same result as the world's highest level.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.7
• /
• pp.165-175
• /
• 2022

The objective of this study is to identify the relationships among app attribution(perceived usefulness, design, information quality, and mobility), user satisfaction, trust, and continuous use intention of bus information apps; The structural equation of AMOS 21.0 was used to test the hypothesis of this study. The results of the analysis are as follows. First, perceived usefulness, design, information quality, and mobility positively impact user satisfaction. Second, only mobility has a positive effect on trust, but the remaining perceived usefulness, design, and information quality have no effect at the significance level of 5%. Third, user satisfaction has a positive impact on trust and continuous use intention. Fourth, trust has a positive impact on continuous use intention. Therefore, it was confirmed that the characteristics of the bus information mobile app are important influencing factors for the improvement of user satisfaction, trust, and continuous use intention. Local governments and bus companies will be able to establish strategic directions for the activation of bus information mobile apps. The limitation of this study is that it is somewhat lacking in generalizing the study results, so future research needs to focus on improving this part.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.32-43
• /
• 2020

The transfer time is an important factor in establishing public transportation planning and policy. Therefore, in this study, the influencing factors of the transfer time for transit users were identified using smart card data, and the estimation results for the transfer time using the deep learning method such as deep neural network models were compared with traditional regression models. First, the intervals and the distance to the bus stop had positive effects on the subway-to-bus transfer time, and the number of bus routes had a negative effect. This also showed that the transfer time is affected by the area in which the subway station exists. Based on the influencing factors of the transfer time, the deep learning models were developed and their estimation results were compared with the regression model. For model performance, the deep learning models were better than those of the regression models. These results can be used as basic data for transfer policies such as the differential application of transit allowance times according to region.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.57-66
• /
• 2023

In this paper, we present a study on an AI-based system utilizing the CCTV system within city buses to predict the intentions of boarding and alighting passengers, with the aim of preventing accidents. The proposed system employs the YOLOv7 Pose model to detect passengers, while utilizing an LSTM model to predict intentions of tracked passengers. The system can be installed on the bus's CCTV terminals, allowing for real-time visual confirmation of passengers' intentions throughout driving. It also provides alerts to the driver, mitigating potential accidents during passenger transitions. Test results show accuracy rates of 0.81 for analyzing boarding intentions and 0.79 for predicting alighting intentions onboard. To ensure real-time performance, we verified that a minimum of 5 frames per second analysis is achievable in a GPU environment. his algorithm enhance the safety of passenger transitions during bus operations. In the future, with improved hardware specifications and abundant data collection, the system's expansion into various safety-related metrics is promising. This algorithm is anticipated to play a pivotal role in ensuring safety when autonomous driving becomes commercialized. Additionally, its applicability could extend to other modes of public transportation, such as subways and all forms of mass transit, contributing to the overall safety of public transportation systems.