• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.1-6
• /
• 2012

Five smart grid projects was started with large scale at Jeju Island in South Korea from 2009, and smart-grid test-bed was started in Nov. 2010. The five projects are Smart Power Grid (SPG), Smart Renewable (SR), Smart Transportation (ST), Smart Place (SP) and Smart Electric Service (SES). Korea government constructed the smart grid public relations center at Nov. 2010 in Jeju Island and there will be continued the field operation and interface testing among five smart gird projects until May. 2013.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.720-721
• /
• 2011

본 논문에서는 제주 스마트그리드실증단지에서 진행중인 스마트그리드 5개 프로젝트 중 송배전분야의 전력망을 통합 운영하는 Smart Power Grid(SPG) 실증시스템의 설계와 구축 현황에 대해서 기술한다. 스마트그리드 프로젝트는 SPG외에도 ST(Smart Transportation), SP(Smart Place), SR(Smart Renewable), SES(mart Electric Service)가 있는데, SPG는 SES 프로젝트에서 운영하는 통합관제센터(TOC)를 거쳐 ST, SR, SP 시스템들과 운전 정보를 서로 교환하여 사용한다.

• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.653-667
• /
• 2019

Using cross-ties to connect cables together when forming a cable network is regarded as an efficient method of mitigating cable vibrations. Cross-ties have been extended and fixed on bridge decks or towers in some engineering applications. However, the dynamics of this kind of system need to be further studied, and the effects of extending cross-links to bridge decks/towers on the modal response of the system should be assessed in detail. In this paper, a system of two cables connected by an inter-supported cross-link with another lower cross-link extended to the ground is proposed and analyzed. The characteristic equation of the system is derived, and some limiting solutions in closed form of the system are derived. Roots of cable system with special configurations are also discussed, attention being given to the case when the two cables are identical. A predictable mode behavior was found when the stiffness of inter-connection cross-link and the cross-link extended to the ground were the same. The vector of mode energy distribution and the degree of mode localization index are proposed so as to distinguish global and local modes. The change of mode behaviors is further discussed in the case when the two cables are not identical. Effects of cross-link stiffness, cross-link location, mass-tension ratio, cable length ratio and frequency ratio on $1^{st}$ mode frequency and mode shape are addressed.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.133-140
• /
• 2019

This study developed smart fashion prototypes that provide utilitarian functionality by combining Fashion and Electronics regarding the IT focused convergence tendency in modern industries. A convergence R&D workshop was performed by Fashion design majors and Engineering majors for the study. As a result, 5 functional smart fashion prototypes were developed and the outline of each prototype are as follows. The $1^{st}$ prototype, 'Hidden Camera Detecting Coat' focused on gender-related crimes. The coat uses infrared lighting and LED technologies to provide a function to detect hidden cameras in suspicious public spaces such as toilets. The $2^{nd}$ prototype, 'Heating-massage Suit' targeted patients with musculoskeletal system difficulties. The suit uses heating and vibration technologies to provide a heating massage treatment for patients with ongoing difficulties in their daily lives. The $3^{rd}$ prototype is an air-bag jacket to prevent sexual molestation on public transportation. The jacket extends its volume through pressure sensing, air compressing, motors and 3D-printing technology to secure the wearer's personal preventive space between the user's body and others. The $4^{th}$ prototype is a town wear for people suffering from synesthesia. People with synesthesia inadvertently see colors when exposed to certain sounds. This town wear uses sound sensing, air compressing, motors and 3D-printing technology to provide sound prevention and a comfortable sound playing function. The $5^{th}$ prototype is a set of a vest and a gloves for visually impaired people. The vest and gloves uses DMS, voice playing, vibration technology to provide distance measuring and warning functions.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.6
• /
• pp.356-370
• /
• 2017

The energy savings and $CO_2$ emission reductions obtainable from the situation that the Smart Grid system (SGs) is assumed to be applied in Korea up to 2030 is quantitatively analyzed with many reported data. For calculation, SGs is divided into five sectors such as Smart Transmission and Distribution (ST&D), Smart Consumer (SC), Smart Electricity Service (SES), Smart Renewable Energy (SRE) and Smart Transportation (ST). Total annual energy savings in 2030 is estimated to be approximately 103,121 GWh and this is 13.1% of total electricity consumption outlook. Based on this value, total amount of reducible $CO_2$ emissions is calculated to 55.38 million $tCO_2$, which is 17.6% of total nation's GHG reduction target. Although the contribution of energy saving due to SGs to total electricity consumption increases as years go by, that of $CO_2$ emission reduction gradually decreases. This might be because that coal fired based power generation is planned to be sharply increased and the rate of $CO_2$ emission reduction scheduled by nation is very fast. The contributable portion of five each sector to total $CO_2$ emission reductions in 2030 is estimated to be 44.37% for SC, 29.16% for SRE, 20.12% for SES, 5.11% for ST&D, and 1.24% for ST.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.177-186
• /
• 2015

This study aims to suggest the direction in which furniture design can contribute, keeping with the trend of small quantity batch production by analyzing cases of furniture design manufacturing. This study analyzed cases of furnitures and lights made by 3D printing with 3 classifications. They are 1st, classification by correlation between 3D printing method and materials, 2nd, classification by 8 formative characteristics of 3D printing furniture design, 3rd, comparison analysis of competitiveness between existing furniture design and 3D printing furniture design by practicality, usability and durability. The competitiveness 3D printing technique arouses in furniture design industry, which is investigated in this thesis, is as follows. 1st, small quantity batch production, which caters to personal taste, is made possible. 2nd, transmission and transportation via digital are became more convenient. 3rd, it brings about a breakthrough in furniture design manufacturing. 4th, there is room for development into the 'smart furniture design' industry through collaborative use of 3D printing and internet of things. 5th, an Eco-friendly method of furniture design is consistently facilitated.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.10
• /
• pp.175-182
• /
• 2016

In the 21st century knowledge and information society, Electronic Contracts made with the intention of electronic computer information networks are emerging as a new legal problem which can not be solved in the conventional legal system governing contracts. In other words, the indicator's decision determines the effect and formation of the contracts in the face-to-face or written contracts but electronic decision through computer information network is established the working process of electronic signals-electronic contracts are not only difficult to separate the decision-making process but questioned to be solved by the theory of the general legal action. Ministry of Transportation is scheduled to introduce real estate sales and lease contract using a variety of electronic devices such as computer, tablet PC, smart phones and so on without a paper contract. This system is conducted to global expansion of Seoul in demonstration zone on May 8, 2016 and will be implemented nationwide in the second half of 2017. Electronics contract Real estate has some benefits because made by linking electronic contract system and the electronic registration system - the economic effects discounts on various kinds of fees, the prevention from real estate fraud beforehand and the solution to the complexity of the process the seller and the buyer visits The Real estate agency. However, it has some problem- the disorder in the real estate contract market, the occurrence of the real estate agency accident and the author of the electronic real estate contracts have limited only to realtor. In this paper, I suggest the activation plan to search for establishment and effect of electronic contracts and declaration of intention in electronic depending on the Electronic Contract Real Estate system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.29-43
• /
• 2019

The calibration of microscopic traffic simulation models has received much attention in the simulation field. Although no standard has been established for it, a genetic algorithm (GA) has been widely employed in recent literature because of its high efficiency to find solutions in such optimization problems. However, the performance still falls short in simulation analyses to support fast decision making. This paper proposes a new calibration procedure using a dual GA and central composite design (CCD) in order to improve the efficiency. The calibration exercise goes through three major sequential steps: (1) experimental design using CCD for a quadratic response surface model (RSM) estimation, (2) 1st GA procedure using the RSM with CCD to find a near-optimal initial population for a next step, and (3) 2nd GA procedure to find a final solution. The proposed method was applied in calibrating the Gipps car-following model with respect to maximizing the likelihood of a spacing distribution between a lead and following vehicle. In order to evaluate the performance of the proposed method, a conventional calibration approach using a single GA was compared under both simulated and real vehicle trajectory data. It was found that the proposed approach enhances the optimization speed by starting to search from an initial population that is closer to the optimum than that of the other approach. This result implies the proposed approach has benefits for a large-scale traffic network simulation analysis. This method can be extended to other optimization tasks using GA in transportation studies.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.47-58
• /
• 2016

The purpose of this study was to select the sectoral vulnerable areas index in welfare field and analyze the socially vulnerable areas from comprehensive analysis. For this study, preceding research and theoretical background were reviewed. Through this, we selected for the analysis index and criteria, and data corresponding to the index are collected. Based on the index and criteria, the data analysis was performed in Seoul Metropolitan City selected as the spatial extent of this study. From the results of analysis, the sectoral lower rank 10% of social vulnerable areas was determined. In addition, Junggu, Yongsangu, and Seodaemungu from the comprehensive analysis of individual vulnerable areas were derived as a final vulnerable areas. In particular, Junggu was weak in all sectors; Yongsangu was in the medical sector; and Seodaemungu was poor in housing and education. Lower vulnerability index of all sectors (energy, housing, medical, transportation, and education) in 1st, 2nd, and 3rd residential areas by examining use zoning was showed. From the results of this study, we can expect time and labor saving of policy support in public sector.