• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.376-383
• /
• 2017

This paper describes the gyroscopic stability and the drag characteristics of the smart munition with a course correction fuze(CCF). A ballistic analysis was conducted to figure out the effect of the canards on the gyroscopic stability of the projectile. The analysis used the commercial ammunition performance evaluation software: Projectile Design and Analysis System(PRODAS). In particular, we compared the PRODAS analysis results to real field test results to investigate the influence of the CCF mounted projectile. In addition, some ballistic simulations were carried out to provide the conditions suitable for wind tunnel tests. Experimental results show that the added drag force by the canards is almost uniform regardless of the Mach number when the projectile is at the normal position where the angle of rotation and the angle of attack are both 0 degrees. However, as the angle of attack of the projectile increases, the additional drag force depends on the deflection of the canards.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.839-847
• /
• 2011

This paper proposes a new guidance law for increasing the lethality of munitions. The well known PNG (Proportional Navigation Guidance) is inadequate for the munitions because of some weaknesses. Even if the munition does not have the impact point error, the acceleration command is non zero because the line-of-sight changes at all times in flight. Therefore, we use a difference between a target and an impact point. This proposed guidance law is similar to PNG in the form, but this guidance law concentrates a correction rate of flight path angle instead of the LOS (Line of Sight) rate. The correction of flight path angle is defined as the amount of impact point error. This impact point error can be calculated by neural networks rapidly. Finally, we show that the simulation results prove the suitability of this law.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.9-16
• /
• 2020

The TA-50 aircraft is conducting simulated training on various situations, including air-to-air and air-to-ground fire training, in preparation for air warfare. It is also used for pilot training before actual deployment. However, the TA-50 does not have the ability to operate smart weapon forces, limiting training. Therefore, the purpose of this study is to implement the TA-50 aircraft to enable virtual training of one of the smart weapons, the Point Direct Attack Munition (JDAM). First, JDAM functions implemented in FA-50 aircraft, a model similar to TA-50 aircraft, were analyzed. In addition, since functions implemented in FA-50 aircraft cannot be directly utilized by source code, algorithms were extracted using machine learning techniques(TensorFlow). The implementation of this function is expected to enable realistic training without actually having to be armed. Finally, based on the results of this study, we would like to propose ways to supplement the limitations of the research so that it can be implemented in the same way as it is.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.41-47
• /
• 2017

With the introduction of new technologies, ground weapons have led to the development of artificial intelligence and the attention of major developed countries. In this study, CFD was performed through the BLU-103 model to obtain aerodynamic data for aircraft that are subjected to rotational motion. To simulate the steady-state of a rotating body, the body was fixed and the principle of rotating the body by rotating the surrounding air was used. In order to examine the aerodynamic feasibility of the rotating aircraft, the analysis was carried out at intervals of $30^{\circ}$ angle from $0^{\circ}$ to $90^{\circ}$ for the simple shape and the side slip angle. It was confirmed that the drag coefficient for the simple model satisfies the quantitative results of 1.0 ~ 1.2 through CD presented in "Drag Book". The aerodynamic data was constructed by applying the valid input verified through the simple type analysis conditions to the actual shape, and the tendency was analyzed. The analysis confirmed that CX, CZ and CY increase not only in the simple model but also in the rotation of the actual model. Especially, the influence of CZ was judged to have contributed to the flight.