• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.121-129
• /
• 2009

Nowadays, global interest is being placed on research and development of smart clothing which is expected to create a high added-value industry in the future. The purpose of this research is to develop smart pants with vibrating massage functions that have excellent outer appearances and provide comfort to wearers and assess outer appearance, comfort, and massaging effects of smart pants. As the results of this research, smart pants where vibrating devices which are mainly composed of vibrating motor, controller, and switch are attached were completed. Vibrating motors were fixed on a thin and light non-woven fabric material, covered with a mesh material, and attached by snaps to the experiment pants. Switch was attached to the inside of a pocket, and batteries were positioned inside of pockets. Ten subjects marked their satisfaction of wearing smart pants on a 5-point scale. Noticeable changes in outer appearance when vibrating motors operate turned out to be low. Wearer's comfort in back waist and front thigh parts where vibrating motors were attached turned out to be high-satisfied. Massaging effects of smart pants turned out to be high. Attaching and detaching vibrating devices turned out to be convenient. Lining materials used for smart paints were effective in blocking electromagnetic waves generated from vibrating devices.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.790-793
• /
• 2001

The characteristics of smart skin for wireless LAN system under compression load are investigated. The smart skin structure is composed of 3 layers of face material and 2 layers of core material. Theoretical formula for determining buckling load is derived by Rayleigh-Ritz method and compared with experimental result. The maximum length of specimen that buckling does not occur is determined by assuming that the compression load is sustained by only face material. In the experiment, if buckling occurs obviously then it follows the theoretical result well. In the process of buckling, the load supporting capability and the antenna property such as radiation pattern and reflection coefficient were examined.

• Journal of Power System Engineering
• /
• v.13 no.1
• /
• pp.65-71
• /
• 2009

To address the need for new intelligent sensing, this paper introduces nano sensors made of carbon nanotube (CNT) composites and presents their preliminary experiments. Having smart material properties such as piezoresistivity, chemical and bio selectivity, the nano composite can be used as smart electrodes of the nano sensors. The nano composite sensor can detect structural deterioration, chemical contamination and bio signal by means of its impedance measurement (resistance and capacitance). For a structural application, the change of impedance shows specific patterns depending on the structural deterioration and this characteristic is available for an in-situ multi-functional sensor, which can simultaneously detect multi symptoms of the structure. This study is anticipated to develop a new nano sensor detecting multiple symptoms in structural, chemical and bio applications with simple electric circuits.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.1
• /
• pp.18-23
• /
• 2011

Conservation of energy and fuel is the trend in smart building design. Radio Frequency Integrated Circuit (RFIC) technology is often used in temperature sensing and signal transmission to manage indoor temperature, but it is rarely applied to the shell of the building. Heat retention and poor insulation in building shells are the largest causes of high energy consumption by indoor air conditioning. Through combining RFIC technology with temperature sensors, this study will develop smart temperature information material that can be embedded in concrete. In addition to accurately evaluating the effectiveness of shell insulation material, the already-designed Building Physiology Information System can monitor long-term temperature changes, leading to smarter building health management.

• Smart Structures and Systems
• /
• v.2 no.2
• /
• pp.171-188
• /
• 2006

This paper deals with damage detection using active Lamb waves. The wavelet transform and empirical mode decomposition methods are discussed for measuring the Lamb wave's arrival time of the group velocity. An experimental system to diagnose the damage in the composite plate is developed. A method to optimize this system is also given for practical applications of active Lamb waves, which involve optimal arrangement of the piezoelectric elements to produce single mode Lamb waves. In the paper, the single mode Lamb wave means that there exists no overlapping among different Lamb wave modes and the original Lamb wave signal with the boundary reflection signals. Based on this optimized PZT arrangement method, five damage localizations on different plates are completed and the results using wavelet transform and empirical mode decomposition methods are compared.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.480-486
• /
• 2011

Conservation of energy and fuel is the trend in smart building design. Radio Frequency Integrated Circuit (RFIC) technology is often used in temperature sensing and signal transmission to manage indoor temperature, but it is rarely applied to the shell of the building. Heat retention and poor insulation in building shells are the largest causes of high energy consumption by indoor air conditioning. Through combining RFIC technology with temperature sensors, this study will develop smart temperature information material that can be embedded in concrete. In addition to accurately evaluating the effectiveness of shell insulation material, the already-designed Building Physiology Information System can monitor long-term temperature changes, leading to smarter building health management.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.7
• /
• pp.499-507
• /
• 2003

This paper presents a method for active noise control (ANC) in a duct by using a ring-tyPe smart foam. The ring-type smart foam consists of an elastic porous material of lining shape and a PVDF film embedded In the material. The PVDF element acts as a secondary sound source to reduce the noise. Active noise control using a ring-type smart foam is only effective locally because of the way to excite radially. To enlarge the quiet zone, the duct Is lined with additional acoustic foam between the smart foam and the error microphone. When cancellation path ks optimized by the LMS/RLS algorithm, the computation power is reduced while control performance Is maintained. The filtered-x LMS algorithm is used to minimize the error signal.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.57-65
• /
• 2022

International attempts to smuggle narcotics and explosives using ship or aircraft cargoes are on the rise. With the recent increase in the number of detection cases of narcotics and explosives in Korea, it is important to detect dangerous material (narcotics and explosives) through container searches at ports and airports, which are the main routes. This paper proposes a technique to detect dangerous material in cargo containers using the sampled output signal of ion mobility spectroscopy (IMS). The proposed technique estimates parameters such as a threshold, a window length, and a noise level for ion detection of the target dangerous material by using known materials in the initialization stage. The estimated parameters are used to detect the ions of the dangerous target material inside the containers. The proposed technique can be applied when the peak value of the IMS signal and the ion mobility are varying due to container environments.

• Smart Structures and Systems
• /
• v.2 no.3
• /
• pp.225-235
• /
• 2006

With the discovery in plants of the proteinaceous forisome crystalloid (Knoblauch, et al. 2003), a novel, non-living, ATP-independent biological material became available to the designer of smart materials for advanced actuating and sensing. The in vitro studies of Knoblauch, et al. show that forisomes (2-4 micron wide and 10-40 micron long) can be repeatedly stimulated to contract and expand anisotropically by shifting either the ambient pH or the ambient calcium ion concentration. Because of their unique abilities to develop and reverse strains greater than 20% in time periods less than one second, forisomes have the potential to outperform current smart materials as advanced, biomimetic, multi-functional, smart sensors or actuators. Probing forisome material properties is an immediate need to lay the foundation for synthesizing forisomebased smart materials for health monitoring of structural integrity in civil infrastructure and for aerospace hardware. Microfluidics is a growing, vibrant technology with increasingly diverse applications. Here, we use microfluidics to study the surface interaction between forisome and substrate and the conformational dynamics of forisomes within a confined geometry to lay the foundation for forisome-based smart materials synthesis in controlled and repeatable environment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10c
• /
• pp.79-88
• /
• 2001

기계, 전기, 전자, 재료, 전산공학 등은 근래에 이르러 혁명적인 발전을 거듭하고 있으며, 이에 따라 새로운 개념의 기기들이 등장하고, 토목계측분야에서도 새로운 방식 및 기기들이 등장하고 있다. 특히 최근의 Smart Material, MEM (Micro-Electro-Machine), Nano- Technology 및 통신기술들은 과거의 공상과학소설에서나 가능하였던 내용들을 실제로 가능케 하였으며, 일부 기술들은 경제성까지 갖춰 상용화되고 있다. 본 고에서는 지반공학적 관점에서 본 이러한 신기술과, 이를 이용한 지반구조물의 정보화에 대하여 살펴보았다.