• 교육시설 논문지
• /
• 제24권1호
• /
• pp.3-10
• /
• 2017

This study is to analyze the remodeling method of library in terms of space extension method and urban regeneration by repurposing function in unused facilities through case study. In many case of library extension, horizontal extensions are more frequent than vertical extensions, because there are limits to extend vertically due to high live load estimation by book stacks. Extension schemes was organized by new building extension method in connection with existing buildings, attaching method small scaled mass or linear mass to existing building, connecting method a plurality of existing small buildings, vertical extension method on the top of the structure, underground extension method using special structure. Unused facility remodeling to the library, large scaled buildings can be developed completely to the function of the library through the relocation of the space, while small scaled building needs spatial extension. In the case of spatial extension, existing space that was used for other purposes can be used as a reading room or office, avoiding high live load estimation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권3호
• /
• pp.58-70
• /
• 2023

본 연구는 소규모 노후 건축물을 대상으로 현행 법 제도적 한계와 문제점을 파악하고 관리대상, 관리조직, 예산 측면의 개선방안을 도출하고자 하였다. 이를 위해 관련 법령인 「건축물관리 조례」, 「건축 조례」에서 규정하는 안전점검 대상, 지역건축안전센터의 안전관리 업무 및 조직 구성, 건축안전특별회계의 재원 조성 등에 관한 사항을 조사하였다. 또한, 전국 지방자치단체를 대상으로 지역건축안전센터 및 건축안전특별회계의 설치 및 운영에 대한 현황을 분석하여 법적 규제에 기반하여 현 안전관리 실태를 진단하였다. 결과적으로 점검대상 측면에서 법적 안전점검 대상에 포함되지 않는 안전관리 사각지대 건축물이 존재한다는 문제점을 도출하였고, 관리 조직 및 예산 측면에서 지역건축안전센터의 운영을 위한 전문인력 확보의 어려움과 건축안전특별회계 운용을 위한 재원 부족으로 설치 및 운영에 대한 한계를 파악하였다. 해당 문제에 대한 개선 안으로 소규모 노후 건축물의 점검 대상 범위 확대에 따른 안전관리 사각지대 축소, 전문인력 보수 규정 개선 및 준전문 인력 양성, 재원 확보를 위한 이행강제금 최소 비율 규정 및 건축허가 수수료의 단계적 상향 조정 등을 제시하였으며 이를 바탕으로 소규모 노후 건축물 안전관리 효율성 제고에 기여하고자 하였다.

• 국제초고층학회논문집
• /
• 제1권3호
• /
• pp.221-228
• /
• 2012

Shanghai Tower is a super high-rise building of 632 m height with 'mega frame-core- outrigger truss' structure system. Due to the complexity and irregularity of structure, shaking table test was carried out to investigate its seismic performance. A 1/40 scaled test model was designed, built and tested on shaking table under earthquake of small, moderate and large levels. The experimental results showed that the structure can meet the requirements of Chinese codes and reach scheduled performance objectives. Elastic and plastic time-history analysis on the structure were carried out and the results were compared to experimental results. Based on the research results some suggestions were proposed to contribute favorable effect on the seismic capacity of the structure.

• 한국BIM학회 논문집
• /
• 제13권1호
• /
• pp.13-21
• /
• 2023

The purpose of this study is to establish a system that manages the safety of buildings efficiently by finding the correlation of elements related to the safety of buildings and intuitively visualizing them. Data were collected using the data of small-scale buildings managed by public institutions and the government, and an effective analysis visualization environment was established through pre-processing. We selected safety-vulnerable factors such as the structure of the building and completion date to find the relationship, and established a model to prioritize management to find vulnerable buildings.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.71-81
• /
• 2024

This study analyzes the pull-out behavior of tunnel-type anchorage under various joint conditions, including joint direction, spacing, and position, using a finite element analysis. The validity of the numerical model was evaluated by comparing the results with a small-scaled model test, and the results of the numerical analysis and the small-scaled model test agree very well. The parametric study evaluated the quantitative effects of each influencing factor, such as joint direction, spacing, and position, on the behavior of tunnel-type anchorage using pull-out resistance-displacement curves. The study found that joint direction had a significant effect on the behavior of tunnel-type anchorage, and the pull-out resistance decreased as the displacement level increased from 0.002L to 0.006L (L: anchorage length). It was confirmed that the reduction in pull-out resistance increased as the number of joints in contact with the anchorage body increased and the spacing between the joints decreased. The pull-out behavior of tunnel-type anchorage was thus shown to be significantly influenced by the position and spacing of the rock joints. In addition, it is found that the number of joints through which the anchorage passes, the wider the area where the plastic point occurs, which leads to a decrease in the resistance of the anchorage.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.186-195
• /
• 1999

This study is focused on the design and performance test of an earthquake simulator using stepping motor. Stepping motor which controls the motion accurately with generated pulses is applied to the earthquake simulator. Earthquakes like El Centro and Taft are used as inputs to the earthquake simulator. First the number of pulses are calculated and sent to pulse generator, . Then the generator controls the simulator according to the pulse sings, It is shown that the measured signals from the simulator are in very good agreement with input signals of scale-downed earthquakes of El Centro and Taft. This simulator will be used for the experimental study of small-scaled building structures with tuned mass dampers under earthquakes.

• 한국실내디자인학회논문집
• /
• 제16권1호
• /
• pp.3-10
• /
• 2007

In the 7th century, Sachunwang-sa temple had two extra building-sites behind the Main hall. These two building-sites were found to be in peculiar form different from any another existing stone bases. The stone bases of northern put of these building-sites were decorated to molding as the protruding comers of eaves, which was pierced into a circular hole, and was carved into a form of Gomeck-ii(the stone bases lot supporting the wall). The northern building of sachunwang-sa temple was found to be used as the altar following munduru(文豆婁) method, through the observations of the archives of Samkukyusa(三國遺事) and the Abhiseka stura(skt. 灌頂經). The molding as the protruding cornets of eaves of stone bases was shaped as the roof of a building and the carving of Gomeck-ii gives a proof of the existence of the wall between columns in the altar. The hole of the stone bases protected the wooden cylinder of munduru from the exterior world. The author concludes, through this research, that the altar of Schunwang-sa temple was used lot the religious service during the war for worthship and protecting from the enemies. Also he concludes that these buildings must have been in wooden pagodas constructed upon a square plan, that is with both front and side width equal, haying a quite small scaled and low floored building with its first floor closed on all sides, being different item the usual form.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.488-490
• /
• 1997

This study is focused on the design and performance test of shaking table using stepping motor. Stepping motor can control the motion accurately with generated pulses and is applied to the shaking table. Earthquakes like El Centro and Taft are used as inputs to the shaking table. First, the number of pulses are calculated and sent to pulse generator. Then, the generator controls the table according to the pulse signs. It is shown that the measured signals from the table are in very good agreement with input signals of scale-downed earthquakes of El Centro and Taft. This table will be used for the experimental study of small-scaled building structures with tuned mass dampers under earthquakes.

• Smart Structures and Systems
• /
• 제25권2호
• /
• pp.155-167
• /
• 2020

This paper demonstrates a real-time hybrid substructuring (RTHS) shake table test to evaluate the seismic performance of a base isolated building. Since RTHS involves a feedback loop in the test implementation, the frequency dependent magnitude and inherent time delay of the actuator dynamics can introduce inaccuracy and instability. The paper presents a robust stability and performance analysis method for the RTHS test. The robust stability method involves casting the actuator dynamics as a multiplicative uncertainty and applying the small gain theorem to derive the sufficient conditions for robust stability and performance. The attractive feature of this robust stability and performance analysis method is that it accommodates linearized modeled or measured frequency response functions for both the physical substructure and actuator dynamics. Significant experimental research has been conducted on base isolators and dampers toward developing high fidelity numerical models. Shake table testing, where the building superstructure is tested while the isolation layer is numerically modeled, can allow for a range of isolation strategies to be examined for a single shake table experiment. Further, recent concerns in base isolation for long period, long duration earthquakes necessitate adding damping at the isolation layer, which can allow higher frequency energy to be transmitted into the superstructure and can result in damage to structural and nonstructural components that can be difficult to numerically model and accurately predict. As such, physical testing of the superstructure while numerically modeling the isolation layer may be desired. The RTHS approach has been previously proposed for base isolated buildings, however, to date it has not been conducted on a base isolated structure isolated at the ground level and where the isolation layer itself is numerically simulated. This configuration provides multiple challenges in the RTHS stability associated with higher physical substructure frequencies and a low numerical to physical mass ratio. This paper demonstrates a base isolated RTHS test and the robust stability and performance analysis necessary to ensure the stability and accuracy. The tests consist of a scaled idealized 4-story superstructure building model placed directly onto a shake table and the isolation layer simulated in MATLAB/Simulink using a dSpace real-time controller.

• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.107-116
• /
• 2020

압밀 그라우팅 공법은 액상화 취약 느슨한 사질토 지반의 보강에 널리 사용되고 있다. 특히 기존에 상부 구조물이 있는 지반의 경우, 압밀 그라우팅 수직 주입이 불가능하여, 수평 주입이 대안으로 제시되고 있는 상황이다. 현재 대부분 이론과 실험은 압밀 그라우팅의 수직 주입 공법을 다루고 있는 반면, 수평 압밀 그라우팅 공법에 대한 연구는 매우 부족하다. 본 연구에서는 수평 압밀 그라우팅 공법에 대한 실내 2차원 실험을 통해 상부 구조물이나 주입 심도를 대변하는 상부 응력에 따른 그라우트 구근 형상과 팽창 방향을 분석하였다. 그 결과 그라우트 구근의 단면은 응력 이방성과 느슨함의 정도에 따라 주로 타원형으로 팽창함을 발견하였다. 특히, 낮은 상부 응력과 낮은 상대 밀도의 조건에 수평축이 긴 타원형으로 수평 방향으로 발달하였고, 상부 응력과 상대 밀도가 증가함에 따라 그 형상이 원형에 가까워지고 수직 방향으로 팽창하였다. 본 연구를 통해 수평 압밀 그라우팅 공법의 구근 팽창에 대한 이해가 높아지고 나아가 보다 정확하고 효율적인 현장 시공 설계가 가능할 것으로 기대된다.