• 제목/요약/키워드: Small-scale simulation

검색결과 485건 처리시간 0.028초

환경부 토지피복도 사용여부에 따른 예측 SWAT 오류 평가 (Analysis of SWAT Simulated Errors with the Use of MOE Land Cover Data)

  • 허성구;김남원;유동선;김기성;임경재
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.194-198
    • /
    • 2008
  • Significant soil erosion and water quality degradation issues are occurring at highland agricultural areas of Kangwon province because of agronomic and topographical specialities of the region. Thus spatial and temporal modeling techniques are often utilized to analyze soil erosion and sediment behaviors at watershed scale. The Soil and Water Assessment Tool (SWAT) model is one of the watershed scale models that have been widely used for these ends in Korea. In most cases, the SWAT users tend to use the readily available input dataset, such as the Ministry of Environment (MOE) land cover data ignoring temporal and spatial changes in land cover. Spatial and temporal resolutions of the MOE land cover data are not good enough to reflect field condition for accurate assesment of soil erosion and sediment behaviors. Especially accelerated soil erosion is occurring from agricultural fields, which is sometimes not possible to identify with low-resolution MOD land cover data. Thus new land cover data is prepared with cadastral map and high spatial resolution images of the Doam-dam watershed. The SWAT model was calibrated and validated with this land cover data. The EI values were 0.79 and 0.85 for streamflow calibration and validation, respectively. The EI were 0.79 and 0.86 for sediment calibration and validation, respectively. These EI values were greater than those with MOE land cover data. With newly prepared land cover dataset for the Doam-dam watershed, the SWAT model better predicts hydrologic and sediment behaviors. The number of HRUs with new land cover data increased by 70.2% compared with that with the MOE land cover, indicating better representation of small-sized agricultural field boundaries. The SWAT estimated annual average sediment yield with the MOE land cover data was 61.8 ton/ha/year for the Doam-dam watershed, while 36.2 ton/ha/year (70.7% difference) of annual sediment yield with new land cover data. Especially the most significant difference in estimated sediment yield was 548.0% for the subwatershed #2 (165.9 ton/ha/year with the MOE land cover data and 25.6 ton/ha/year with new land cover data developed in this study). The results obtained in this study implies that the use of MOE land cover data in SWAT sediment simulation for the Doam-dam watershed could results in 70.7% differences in overall sediment estimation and incorrect identification of sediment hot spot areas (such as subwatershed #2) for effective sediment management. Therefore it is recommended that one needs to carefully validate land cover for the study watershed for accurate hydrologic and sediment simulation with the SWAT model.

  • PDF

중형항공기용 터보팬 엔진의 성능최적화를 위한 LQR 제어기 설계 (II) (A LQR Controller Design for Performance Optimization of Medium Scale Commercial Aircraft Turbofan Engine (II))

  • 공창덕;기자영
    • 한국추진공학회지
    • /
    • 제2권3호
    • /
    • pp.99-106
    • /
    • 1998
  • 현재 국내에서 개발되어왔던 중형항공기 후보엔진인 터보팬 엔진의 성능해석과 성능최적화를 위한 제어기법을 연구하였다. 선행된 연구에서 동적모사 및 실시간 선형모사를 수행한 결과 지상 정지조건 하에서 70% 엔진로터 회전수에서 100% 엔진로터 회전수로 급상승하는 경우 고압터어빈 입구온도에서 오버슈트가 발생하여 제한온도인 3105 $^{\cire}R$ 을 넘어감을 확인할 수 있었다 또한 압축기의 서지여유도 협소하여 엔진에 손상을 가져올 수 있다. 이에 본 연구에서는 보다 빠른 가속성능과 함께 엔진 성능의 최적화를 위해 LQR 제어기를 설계하였다. 제어기의 설계를 위해서는 선형모델을 구성해야하며 엔진의 비선형 거동에 보다 근접한 선형화를 위해서는 실시간 선형모사가 요구된다. 선형모델에 필요한 행렬은 자동점에 %의 섭동을 주어 5% 간격으로 구하였으며, 최소자승법을 이용하여 저압 엔진로터 회전수의 함수로 보간하는 방법으로 실시간 선형모사를 수행하였다. 제어변수는 연료유량의 증가속도와 압축기 블리드 공기유량으로 하였으며, 제어 결과 고압 터빈입구온도의 오버슈트를 제거하였으며 최대 압축기 서지여유도 0.55 이하로 확보였다. 비연료소모율도 0.353에서 0.43으로 안정됨을 확인할 수 있었다.

  • PDF

미시적 열섬현상 저감을 위한 도시 가로수 식재 시나리오별 분석 - 서울시를 대상으로 - (Urban Street Planting Scenarios Simulation for Micro-scale Urban Heat Island Effect Mitigation in Seoul)

  • 권유진;이동근;안새결
    • 환경영향평가
    • /
    • 제28권1호
    • /
    • pp.23-34
    • /
    • 2019
  • 지구온난화는 해수면 상승이나 전 세계의 변덕스러운 기후와 같은 심각하면서 부차적인 문제를 야기한다. 2015년 여름에 심각한 폭염이 있은 이래로, 도시열섬에 대한 큰 관심이 모아졌다. 폭염 자체에 대한 연구뿐만이 아니라, 많은 연구가 온난화된 기후와 미시 기후에 적응하는 방법에 중점을 둔다. 기존 연구들의 상당부분은 도시열섬 효과를 완화하는 것인데, 이는 다양한 활동을 하고 있는 인구가 많은 도시 지역에 거대한 불침투성 표면이 존재하고 있기 때문이다. 또한 이 열 환경이 열 취약성에 의한 사망을 초래할 가능성이 높다는 것은 심각한 문제이다. 여름철 그린인프라의 냉각효과에 대한 논문이 많이 있어왔지만, 본 연구는 도시 협곡과 인접한 그린인프라 유형을 고려하여 가로수의 냉각 효과를 측정하는 데에 집중했다. 이 정량적 접근은 ENVI-met 시뮬레이션을 통해 서울의 상업지역 블록에서 진행되었다. 연구결과로 밀도가 높은 2열 식재가 단열식재보다 온도 변화에 더 민감하다는 것을 발견했다. 2열 식재 시나리오 중 가로수와 지표면 사이의 공간이 좁은 관목은 주간에 열을 저장하여 야간에 저장열 방출을 막아 더 높은 온도를 유지하는 것으로 밝혀졌다. 식생 공간의 냉각 효과를 정량화하면 미래의 비용 및 편익 평가 연구에 기여할 것으로 기대된다.

CFD를 이용하여 건물 외피의 바람에너지에 관한 적용연구 (A Basic Study for Wind Energy of Building Cladding using Computational Fluid Dynamics)

  • 정영배
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 추계학술대회 초록집
    • /
    • pp.39.2-39.2
    • /
    • 2011
  • The new and renewable energy today has a great interest in all countries around the world. In special it has need more limit of the fossil fuel that needs of low carbon emission among the social necessary conditions. Recently, the high-rise building demand the structural safety, the economic feasibility and the functional design. The high-rise building spends enormous energy and it satisfied the design in solving energy requirements. The requirements of energy for the building depends on the partly form wind energy due to the cladding of the building that came from the surroundings of the high-rise building. In this study of the wind energy, the cladding of the building was assessed a tentative study. The wind energy obtains from several small wind powers that came from the building or the surrounding of the building. In making a cladding the wind energy forms with wind pressure by means of energy transformation methods. The assessment for the building cladding was surrounded of wind speed and wind pressure that was carried out as a result of numerical simulation of wind environment and wind pressure which is coefficient around the high-rise building with the computational fluid dynamics. In case of the obtained wind energy from the pressure of the building cladding was estimated by the simulation of CFD of the building. The wind energy at this case was calculated by energy transform methods: the wind pressure coefficients were obtained from the simulated model for wind environment using CFD as follow. The concept for the factor of $E_f$ was suggested in this study. $$C_p=\frac{P_{surface}}{0.5{\rho}V^{2ref}}$$ $$E_c=C_p{\cdot}E_f$$ Where $C_p$ is wind pressure coefficient from CFD, $E_f$ means energy transformation parameter from the principle of the conservation of energy and $E_c$ means energy from the building cladding. The other wind energy that is $E_p$ was assessed by wind power on the building or building surroundings. In this case the small wind power system was carried out for wind energy on the place with the building and it was simulated by computational fluid dynamics. Therefore the total wind energy in the building was calculated as the follows. $$E=E_c+E_p$$ The energy transformation, which is $E_f$ will need more research and estimation for various wind situation of the building. It is necessary for the assessment to make a comparative study about the wind tunnel test or full scale test.

  • PDF

내부폭발 시 철근콘크리트 구조물 거동에 대한 전산수치해석과 실험적 검증 (Computational Numerical Analysis and Experimental Validation of the Response of Reinforced Concrete Structures under Internal Explosion)

  • 지훈;문세훈;정진웅;성승훈;유양선
    • 한국시뮬레이션학회논문지
    • /
    • 제27권1호
    • /
    • pp.101-109
    • /
    • 2018
  • 실험과 유한요소코드를 이용한 수치해석은 폭발 하중에 의한 구조거동을 이해하는 유용한 방법이다. 그러나 내부폭발에 의한 철근콘크리트 구조물 거동에 대한 유한요소해석 결과와 실험적 검증에 대한 자료는 극히 드물다. 이 논문에서는 내부폭발에 의한 철근콘크리트 구조물 거동을 수치해석과 실험적으로 연구하였다. 방 하나짜리 축소형 콘크리트 내력벽 건물 중심에서 TNT가 기폭되는 상황을 고려하였다. 내부 폭풍압 분포와 철근콘크리트 벽 거동 분석은 유한요소 해석 코드인 ANSYS AUTODYN을 사용하였다. 수치해석과 실험을 비교한 결과 방 내부 세 곳에서 측정한 폭풍압과 두 벽 중심의 변위, 네 벽의 파손형태가 유사하게 나타났다. 또한 내부폭발 시 구조부재 거동에 대한 수치해석의 타당성과 정당성을 구조적 피해평가 측면에서 논의한 결과, 해석과 실험에서 같은 파손으로 평가되었다.

가변 및 민감성 부하를 고려한 대단위 가상 발전소 운영 방법 (Large-scale Virtual Power Plant Management Method Considering Variable and Sensitive Loads)

  • 박용국;이민구;정경권;이용구
    • 전자공학회논문지
    • /
    • 제52권5호
    • /
    • pp.225-234
    • /
    • 2015
  • 가상발전소(Virtual Power Plant)는 비상발전(DG), 열병합발전(CHP), 에너지 저장 장치(ESS), 부하(Load)등과 같은 분산 에너지 자원을 ICT기반의 기술로 연계하여 하나의 단일 발전소와 같이 운영하는 기술이다. 지금까지의 가상발전소는 하나의 가상발전 플랫폼을 통하여 광범위하게 산재해 있는 다양한 분산 에너지 자원을 네트워크로 연결하는 구조를 기반으로 개발되고 실증되었다. 그러나 분산 에너지 자원 종류 및 수가 지속적으로 증가할 경우 이러한 분산 에너지 자원과 관련된 데이터 또한 기하급수적으로 증가할 수밖에 없으며 분산 에너지 자원의 분포가 광범위한 지역에 분포되어 있는 경우 하나의 가상발전 플랫폼으로 이들 모든 자원에 대한 네트워크를 중앙 집중형으로 가져가는 것은 네트워크 구성을 위한 기술적, 비용적 측면에서 매우 비효율적이다. 따라서 본 논문에서는 광범위한 지역에 분포되어 있는 분산 에너지 자원을 효율적으로 관리함으로써 시스템 부하에 따른 오류 확률을 낮추고, 분산 에너지 자원과의 데이터 교환의 견고성과 가상발전소의 확장성을 확보할 수 있는 대단위 가상 발전소 구성 방법을 제안한다. 또한 대단위 가상 발전소 구성 시 분산 에너지 자원을 직접적으로 제어하고 모니터링하는 소단위 가상발전 플랫폼에서 가변 및 민감성 부하를 고려한 최적의 자원 스케줄링 방법 또한 시뮬레이션을 통해 그 결과의 유효성을 검증한다.

대규모 무선 센서 망에서 종단 간 신뢰성 보장을 위한 기회적 다중경로 라우팅 방안 (Opportunistic Multipath Routing Scheme for Guaranteeing End-to-End Reliability in Large-Scale Wireless Sensor Networks)

  • 김천용;정관수;김상하
    • 한국통신학회논문지
    • /
    • 제40권10호
    • /
    • pp.2026-2034
    • /
    • 2015
  • 무선 센서 망은 제한된 통신범위를 가지는 수많은 센서 노드들로 구성된다. 따라서 직접 통신이 가능하지 않은 노드들 사이에는 다중 홉으로 통신하게 되며, 이는 패킷 전달의 신뢰성을 저하시킨다. 다중경로 라우팅과 기회 라우팅은 무선 센서 망에서 신뢰성을 보장하기 위한 대표적인 연구들이다. 기존 방안들은 종단 간 홉 수가 작은 경우 효과적으로 신뢰성을 향상시키지만, 홉 수가 커질수록 성능이 급격히 떨어진다. 따라서 기존 방안들은 종단 간 홉 수가 큰 대규모 무선 센서 망에는 적합하지 않다. 본 논문에서는 대규모 무선 센서 망에서 신뢰성 보장을 위한 기회적 다중경로 라우팅 방안을 제안한다. 서로 다른 특성 때문에 다중경로 라우팅과 기회 라우팅을 동시에 적용하는 것은 매우 어렵다. 제안방안은 구간 단위의 라우팅을 통해 두 방안을 동시에 적용함으로써 종단 간 신뢰성을 크게 향상시킨다. 또, 기회적 다중경로 라우팅을 통해 요구되는 신뢰성을 보장하기 위해 구간 신뢰성 개념을 제안한다. 각 구간에서의 신뢰성을 요구되는 종단 간 신뢰성보다 높게 설정함으로써 종단 간 신뢰성을 보장할 수 있다. 성능 평가 결과는 제안방안이 기존 방안에 비해 대규모 무선 센서 망에서의 신뢰성 보장에 더 적합함을 보인다.

소규모 경축순환 유기농가의 경제적 최적규모 조합 실증 분석 (An Empirical Analysis of Optimal Size Combination in the Small Crop-Livestock Cycling Organic Farm)

  • 최덕천
    • 한국유기농업학회지
    • /
    • 제26권1호
    • /
    • pp.57-72
    • /
    • 2018
  • Organic agriculture seeks sustainable agriculture. Organic agriculture is based on circulating agriculture of a family farm unit. However, as of the end of 2016, only 33 out of the total organic farming farms were implementing Crop-Livestock cycling organic farming. The reason seems to be a matter of income after all. The optimal size combination refers to the scale by which family farms can maintain their quality of life while engaging in farming activities. In other words. it is a farm scale that maintains optimal income through stable labor costs. In the meantime, there has been no previous study on the optimal economical combination of Crop-Livestock cycling farming. Choi (2016) analyzed whether the economies of scope (EOS) were realized in the combined production by using the management data of the farmers who practiced Crop-Livestock cycling organic farming for four years. As a result, it has been revealed that the EOS measurement value is 0 or more so the economies of scope are being realized. Therefore, the purpose of this empirical analysis is to identify farm incomes under this circumstance. It is assumed that the optimum production is achieved by balancing the total income curve and the total cost curve in the optimal scale production range. The results of the analysis are as follows. First, the income after the conversion to Crop-Livestock cycling farming was 44,789,280 won, the sum of the seedling-livestock sector, which was 17,873,120 won higher when the non-Crop-Livestock cycling farming was assumed. The same is true for 2014 and 2015. The reason for this is that pig droppings were composted from organic seedlings, and the cost of selling pork was 150,000 won/per pig more expensive even though the manufacturing cost of organic feeds was higher than the purchasing cost. Secondly, this study simulated the result that the economic index varies when the farm size combination is changed by the farm size of 100% standard (S100) as of 2014. S130 is the increase in size from 100% of 2014, whereas S30 is the result of 3ha crop and 66 livestock (pigs). As a result of this simulation, Crop-Livestock cycling farming income decreased more than non-Crop-Livestock cycling farming as the farm size decreased, whereas the income decreased as the farm size increased. When the size was reduced below S50, the income tended to decrease. In this situation, EOS changed in the same direction. The results showed that when the farming size was reorganized and reduced to 50% compared to 2014, the income and income difference was the highest. At the same time, economies of scope (EOS) were the highest at 0.12985. In other words, it was found that the income of farm houses in a family farm unit sector was the best in the combination of 1.5ha crop agriculture and 110 livestock (pigs).

가스하이드레이트 개발과정에서의 단층 재활성화 해석 (Numerical Analysis for Fault Reactivation during Gas Hydrate Production)

  • 김형목;김아람
    • 터널과지하공간
    • /
    • 제26권2호
    • /
    • pp.59-67
    • /
    • 2016
  • 본 논문에서는 해저 하이드레이트 퇴적층에서의 메탄가스 생산 과정에서 발생 가능한 생산정 주변 단층의 재활성화 가능성을 수치해석을 통해 평가하고 재활성화에 따른 미소지진 규모를 예측한 결과를 소개하였다. 가스 생산에 의한 하이드레이트 퇴적층의 유효응력 변화 및 역학적 변형은 TOUGH+Hydrate 코드와 FLAC3D 코드를 순차적으로 연계해석함으로써 시뮬레이션하였다. 단층면 재활성화 기준은 모어쿨롱(Mohr-Coulomb)법칙이 유효한 것으로 가정하였다. 30일간의 시험생산 해석 결과, 감압에 의한 공극압력 감소 및 유효응력의 증가가 주변 단층의 활성화를 일으킬 가능성은 크지 않은 것으로 나타났다. 초기응력 조건에 따른 활성화 가능성을 활동마찰각으로 평가한 결과로부터 수평응력에 비해 수직응력이 상대적으로 큰 정단층 응력조건(normal fault stress regime)에서 단층 재활성화 가능성이 상대적으로 큰 것으로 파악되었다. 또한, 정단층 응력조건에서 단층 재활성화에 기인한 유도지진 발생규모를 모멘트 크기(moment magnitude)로 추정할 경우, 모두 음(-)의 값을 보여 인간이 감지하지 어려운 수준의 미소지진에 해당하는 결과를 보였다. 다만, 본 해석은 하이드레이트 생산과정에서의 단층재활성화 가능성 평가를 목적으로 한 해석기법 구축 및 그 적용성을 소개할 목적으로 상당히 단순화된 지질구조 모델을 가정한 결과이므로, 향후 하이드레이트 시험 생산 및 상업 생산 지역에서의 상세 지질구조, 입력 물성 및 생산 설계조건을 반영한 해석에서는 상이한 결과를 보일 수 있을 것이다.

암반 공동 열에너지저장소 주변 암반의 수리적 조건에 따른 열-수리-역학적 연계거동 분석 (Effects of Hydrological Condition on the Coupled Thermal-Hydrological-Mechanical Behavior of Rock Mass Surrounding Cavern Thermal Energy Storage)

  • 박정욱;;이항복;류동우;신중호;박의섭
    • 터널과지하공간
    • /
    • 제25권2호
    • /
    • pp.168-185
    • /
    • 2015
  • 본 연구에서는 천부의 암반 공동에 대용량 고온의 열에너지를 저장하는 경우 주변 암반에 야기되는 열-수리-역학적 연계거동을 살펴보고, 이에 지하수위와 암반 투수계수 등 수리적 조건이 미치는 영향을 검토하였다. 해석대상을 투수계수가 비교적 낮은 수준($10^{-17}m^2$)인 결정질 암반으로 가정할 때 열에너지 저장으로 인한 암반 거동에 지하수가 미치는 영향은 크지 않을 것으로 예측되었다. 저장 공동이 지하수위 하부에 위치하는 경우의 온도, 주응력, 변위 분포 등은 저장공동이 불포화대에 위치하는 경우와 거의 동일하게 나타났다. 암반내 열전달 특성은 암반의 투수계수에 매우 큰 영향을 받는 것으로 나타났다. 암반의 투수계수를 $10^{-15}m^2$ 이하로 가정한 경우 열전달은 주로 암반에 전도에 의한 것으로 판단할 수 있었으나, 투수계수를 $10^{-12}m^2$으로 가정하는 경우 지하수 대류에 의한 상향 열유동이 뚜렷이 관찰되었다. 암반 투수계수의 크기에 따라 열수의 대류나 비등으로 인한 상변화 등 복합적인 유동 특성을 나타났으며, 온도, 압력, 포화도 분포가 상이하게 발달하였다.