• 제목/요약/키워드: Small-Scale Development

검색결과 1,030건 처리시간 0.03초

원자로수소생산을 위한 연결부품 실험용 소형 컴팩트 실험장치 개발 (Development of a Compact Nuclear Hydrogen Coupled Components Test Loop)

  • 홍성덕;김종호;김찬수;김용완;이원재
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2850-2855
    • /
    • 2008
  • Very High Temperature Reactor (VHTR) has been selected as a high energy heat source for a nuclear hydrogen generation. The VHTR heat is transferred to a thermo-chemical hydrogen production process through an intermediate loop. Both Process Heat Exchanger and sulfuric acid evaporator provide the coupled components between the VHTR intermediate loop and hydrogen production module. A small scaled Compact Nuclear Hydrogen Coupled Components test loop is developed to simulate the VHTR intermediate loop and hydrogen production module. Main objective of the loop is to screening the candidates of NHDD (Nuclear Hydrogen Development and Demonstration) coupled components. The operating condition of the gas loop is a temperature up to $950^{\circ}C$ and a pressure up to 6.0MPa. The thermal and fluid dynamic design of the loop is dependent on the structures that enclose the gas flow, especially primary side that has fast gas velocity. We designed and constructed a small scale sulfuric acid experimental system which can simulate a part of the hydrogen production module also.

  • PDF

상압기상연소시험을 통한 동축형 스월 분사기와 충돌형 분사기의 연소 안정성 평가 (An Experimental Assessment of Combustion Stability of Coaxial Swirl Injectors and an Impinging Injector through Simulating Combustion Test)

  • 박준형;김홍집
    • 한국연소학회지
    • /
    • 제22권1호
    • /
    • pp.46-52
    • /
    • 2017
  • High-frequency combustion instabilities may occur during the development of feasible engine combustors. These instabilities can result in irreparable damages to the wall of combustors or the degradation of engine performance. So, it is essential to identify injectors that have high stability characteristics during the early stages of development. The objective of present study was to assess the stability of coaxial injectors and an impinging injector with different recess lengths in order to develop stable injectors optimally. Stability margin was evaluated based on the distance from operating condition to the unstable regions. A simulating combustion test method was used to analyze the stability of injectors. A small-scale combustion chamber was designed to simulate the first tangential acoustic mode of the actual combustor. Gaseous oxygen and a mixture of methane and propane were used as simulant propellants to satisfy their flow similarity to the actual propellants of a combustor in a liquid rocket combustor. The results indicated that injectors having small recess lengths showed relatively large combustion stability margins. For the injectors of large recess lengths, instability regions with large and super-large amplitude oscillations were observed. Thus, injector with shorter recess lengths had a higher stability than that of longer one due to the different mixing processes.

입자분리를 위한 여과방식에 따른 비용-효율 분석 (From Deep Bed Filter to Membrane Filtration: Process Intensification, Cost and Energy Considerations)

  • ;권대영
    • 상하수도학회지
    • /
    • 제19권2호
    • /
    • pp.144-148
    • /
    • 2005
  • The industrial development of large scale deep bed filters has been a very important step in the process of drinking water production and more recently in the tertiary treatment of wastewater. The target of deep bed filtration is the retention is the retention of small particles generally smaller than 30 microns at relatively small concentration, generally less than 30 mg/l from natural water (surface water or aquifers) or secondary treated wastewater. The relation between the retention efficiency and the characteristics of the particles has been extensively studied experimentally and through different models of retention. During the last years the development of new technologies (fiber filter, membrane modules) lead to more intensive processes compared to conventional sand filtration. Fiber filters can combine intensification with a decrease in specific energy needed however they cannot be operated under gravity like sand filters. Membrane filters (UF or MF) are much more intensive and efficient than sand filters. The specific energy needed is not so high (about $0.1Kwh/M^3$) but is higher than sand or fiber filter. A Life Cycle Analysis (LCA) has to be made for a complete comparison between these technologies taking in account that the efficiency of particle retention obtained by membrane filters is unique.

소규모 공작기계용 소재공급장치의 이송 셔틀 시스템에 관한 구조해석 (Structural Analysis of a Carriage Shuttle System : A Material Supply Device for Small-Scale Machine Tools)

  • 강대성;정은익;김경희;백일천;이중섭
    • 한국기계가공학회지
    • /
    • 제18권4호
    • /
    • pp.62-68
    • /
    • 2019
  • The aim of this study was to interpret the structure and dynamics of a transfer shuttle system as a material supply device for small machine tools. The following conclusions were obtained by performing a structural interpretation of the material supply equipment with respect to workload and the dynamical interpretation of a flexible multibody carriage shuttle. When a 1,000-kg workload was applied to a fork lift, the safety factor was approximately 1.86. To conservatively assess the integrity of the structure, a 1,000-kg workload would be proper. In the case of a deflection of the fork system, the width increased with increasing time. The greatest deflection occurred at 5.5 s, which was the largest increase in the time point of the fork system.

증류탑 성능평가에 적합한 소형 증류탑 개발 (Development of Small Distillation Column for Performance Evaluation of Distillation Column)

  • 김병철;조태제;김영한
    • Korean Chemical Engineering Research
    • /
    • 제48권5호
    • /
    • pp.668-671
    • /
    • 2010
  • 증류시스템 검증용 소형 다단 증류 장치에 활용할 수 있는 소형 충전물을 사용하여 실험실 규모의 증류실험을 실시하였다. 직경 6.7 mm의 실린더형 스테인레스 스틸 충전물을 이용하여 충분한 겉보기 표면적을 얻었고, 액의 체류량과 체류 속도도 양호한 결과를 얻었다. HYSYS를 이용한 이론단수의 계산치와 증류실험치를 비교하여 27 cm 충전층에 대해서는 7 cm이고, 45 cm 충전층에 대해서는 8 cm의 충전층이 이론단 1 단에 해당함을 알았다. 상업용 일정구조 배열의 충전탑에서 8 cm의 충전층이 이론단 1 단에 해당함과 비교하면 유사한 증류효율을 얻을 수 있음을 보여 주었다. 이러한 결과는 증류관의 보온이 완벽할 때 가능하였으며, 실험실에서의 증류 실험에서는 보온이 중요함을 입증하였다. 본 실험 결과로부터 실험실에서도 실제 현장에서 사용하는 증류탑과 유사한 증류 시스템의 시험이 가능함을 보여 준다.

Status, Trend and Strategy on Municipal Wastewater Management in China

  • Wang, Baozhen;Wang, Lin;Liu, Shuo;Wang, Li;Wang, Zheng
    • 한국습지학회지
    • /
    • 제9권1호
    • /
    • pp.47-60
    • /
    • 2007
  • The rapid development of economy in China at the expense of consuming huge amount of energy and resources, water resource in particular, which has resulted in the production and discharge of increasing amount of wastewater to the water environment. In order to effectively control the increasing water pollution trend, the State Council has stipulated that all the cities with population over 500,000 should reach wastewater treatment rate of 60% by 2005, and all the cities should reach the rate of 60% by 2010, of which Capital Beijing and all the province capital cities and important tourism cities should reach 70% then. By the end of 2005, of the 661 cities in China, 393 have built and operated municipal wastewater treatments with a total number of 790 sets, total treatment capacity of $80.91{\times}106m^3/d$ and total treatment rate of > 48%. Other 73 cities have started the construction of municipal wastewater treatment plants, and other 168 cities have started to prepare, planning and design of wastewater treatment plants. Most of municipal wastewater treatment plants in big cities in China operate normally and perform well with good quality of effluent in terms of wastewater treatment train, but the sewage sludge treatment is usually poor with big problems. It has been found that the small scale WWTPs using activated sludge process in the towns are usually operated and maintained abnormally because of lack of fund, skilled operators and energy. It is therefore suggested that the small scale MWWTPs in small cities and towns adopt appropriate technologies, of which the most available ones are multi-stage ponds, constructed wetlands and the combination of them for further purification and reuse of treated wastewater.

  • PDF

소형 풍력과 태양 에너지를 이용한 하이브리드 발전시스템 개발 (The Development of Hybrid Power System using small Wind and Solar Energy)

  • 김민;이동헌;정재훈;박원현;변기식;김관형
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 추계학술대회
    • /
    • pp.250-251
    • /
    • 2015
  • 세계적으로 핵 연료와 자연에서 발생되는 화석 연료의 급격한 소비로 인해 자원의 부족으로 대체 에너지가 필요한 실정이다. 현재 세계적으로 많은 대체에너지를 개발 연구하고 있다. 그 중에 기존에 풍력발전 시스템은 대형의 추세로 시스템화가 발전되어 왔으며, 소형의 풍력 발전시스템은 단순하게 풍력발전 원리를 이용하여 발전시스템을 만들어져 왔다. 기존의 소형 풍력 발전시스템은 체계적으로 개발되어 온 것이 아니므로 발전 효율의 저하와 유지보수 문제점으로 많은 곳에서 방취되고 있는 실정이다. 본 논문에서는 소형풍력의 발전 효율 상승과 동시에 태양 에너지를 발전 할 수 있는 하이브리드 발전시스템을 개발하고, 네트워크를 통해 하이브리드 발전시스템을 효율적으로 유지보수 할 수 있는 시스템을 개발하고자 한다.

  • PDF

사상체질에 근거한 노인의 한방약선죽 개발에 관한 연구 (Development of Oriental Medicinal Porridges Based on Sasang Constitutional Medicine for the Elderly)

  • 홍종숙;임현정
    • 한국식생활문화학회지
    • /
    • 제36권6호
    • /
    • pp.607-621
    • /
    • 2021
  • The elderly population is rapidly increasing in South Korea, and interest in food development considering the Sasang constitution theory from oriental medicine and balanced nutrition is increasing. We developed the oriental medicinal porridges based on the Sasang constitution for the elderly. By Sasang constitutional medicine, Taeyangin has a large lung and small liver, and Soyangin has a large stomach and small kidney. Taeeumin has a small lung and large liver, and Soeumin has a small stomach and a large kidney. In this study, proper oriental medicine and food ingredients were identified, and a total of 12 oriental medicinal porridges were developed for 3 items by 4 Sasang constitution types. A single portion was developed based on about 600±66kcal, and the food ingredients were chopped. After cooking the menu developed based on the Sasang constitution, a sensory test was conducted. Five items, such as taste, appearance, aroma, texture, and overall preference, were evaluated on a 7-point scale. Sewage omegaenggul porridge among porridges for Taeyangin had the highest overall acceptance (6.17±0.7 points). Sukjihwang abalone black sesame porridge for Soyangin had the highest score(5.83±0.9 points). Sanyakyulmu hwangtae porridge for Taeeumin had the highest score(5.90±0.6 points). Ginseng chicken curry porridge among porridges for Soeumin had the highest overall preference in taste, appearance, aroma, texture, and overall acceptability (6.53±0.7 points). A limitation of this study was that the clinical trial could not be conducted on the elderly classified as Sasang constitution. In the future, the elderly will be able to have oriental medicinal foods according to the classification of Sasang constitution.

자연정화공법을 이용한 소형 축산폐수처리장치의 최적여재 선정 (Selection of Optimum Filter Media in Small-Scale Livestock Wastewater Treatment Apparatus by Natural Purification Method)

  • 김아름;김홍출;서동철;박종환;김성헌;이성태;정태욱;최정호;김현욱;조주식;허종수
    • 한국토양비료학회지
    • /
    • 제44권2호
    • /
    • pp.285-292
    • /
    • 2011
  • 소규모 축산농가로부터 발생되는 축산폐수를 효과적으로 처리하기 위한 인공습지를 개발하기 위하여 인공습지에서 가장 중요한 인자 중 하나인 최적 여재의 선정에 관하여 연구하였다. 최적여재를 선정하기 위하여 여재를 왕사, 쇄석, 제올라이트 및 방해석으로 달리하여 충진한 후 각 여재별 축산폐수 처리효율 조사한 결과 COD 처리효율은 왕사가 다른 여재에 비하여 높았고, SS 처리효율은 모든 여재에서 94-95%로 큰 차이 없었다. 또한 T-N 처리효율은 제올라이트가 다른 여재에 비해 높았고, T-P 처리효율은 방해석이 다른여재에 비해 높았다. 이상의 결과에서 COD, SS, T-N 및 T-P 모두를 안정적으로 처리할 수 있는 최적여재는 왕사였다. 소형 축산폐수처리장치에서 질소와 인 처리효율을 극대화 하기 위해 호기성조 (왕사:쇄석:방해석=3:2:1)와 혐기성조 (왕사:쇄석:제올라이트=3:2:1)에 혼합여재를 주입한 결과 최적 여재인 왕사에 비해 질소 및 인처리효율이 각각 15% 및 7% 향상되었다.

뱀장어 양식장에서 발생하는 온실가스 배출량 산정 (Estimation of Green-House-Gas emissions from domestic eel farm)

  • 김종현;이경훈;이동길;박성욱;양용수
    • 수산해양기술연구
    • /
    • 제50권1호
    • /
    • pp.58-66
    • /
    • 2014
  • The purpose of the study is to estimate the Green-House-Gas (GHG) emissions from domestic eel farm in the water recirculation system or still-water system by the assessment of energy consumptions and GHG emissions for establishing to reduce standards of GHG from a sustainable perspective. GHG emission components as seeds, feed, fuel, electricity, fixed capital, fish respiration, and others were analysed at the different culture type between water recirculation system and still-water system by 3 stage farm size of small, medium, large scale. The result showed that the mean GHG emission of the eel farm was $18.7kg{\cdot}CO_2$ in the stage of production per fish 1kg at different culture type and farm size. Therefore it could be useful for policy, planning, and regulation of aquaculture development with establishing GHG reduction standards.