• 한국패류학회지
• /
• 제20권2호
• /
• pp.159-164
• /
• 2004

In the present study we examined latitudinal trend of the number of species and species diversity of rocky subtidal shelled gastropods. Specimens were sampled from four wave-exposed sites along the eastern coast of Korea between Sockcho (38$^{\circ}$14"N_ and Busan (35$^{\circ}$06"N), covering a range of over ca. 440 km and 4$^{\circ}$ of latitude. At a small local scale, the number of species showed a latitudinal trend, decreased with decreasing of latitude, even though no clear trends in species diversity were detected. The present result, consequently, suggest that regulation of small-scale local diversity presumably results from the difference of the local micro-environment.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.238-249
• /
• 2015

Purpose: Fruit and vegetable production is a fast-growing sector in East Africa, and it bears considerable local and international market potential. In an effort to analyze the challenges within this sector and suggest possible solutions, this study reviews the postharvest handling technologies commonly used with fruits and vegetables in East Africa. Methods: During the course of this study, small-scale farmers were identified as the most prominent producers of fruit and vegetable crops in the region. Results: We found that many of these small-scale farmers employed relative simple and inexpensive techniques in handling their limited volumes of produce. Several factors could be addressed to reduce postharvest losses, including weak policies, inferior infrastructure, and poor market strategies. However, the lack of basic knowledge (including demographic, scientific, and economic knowledge) among the stakeholders (e.g., researchers, farmers, governments, nongovernment organizations, and merchants) on how to develop, implement, use, and sustain the recommended handling technologies is probably the most problematic. Conclusions: We recommend that high priority be placed on closing the knowledge gap, which could enhance the efforts of all the stakeholders to address and reduce postharvest losses.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.184-190
• /
• 2014

Fuel cell power system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. In recent years, railway field as well as mobile fuel cell power system is being studying actively with development of hydrogen storage technologies. This paper presents the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. it is confirmed that proposed fuelcell-battery hybrid system shows good response characteristic about speed and torque based on design of parameter on system. Also as results of response for proposed system modeling, it show that powering mode and braking mode of system is controlled by switching devices of converters.

• 한국축산시설환경학회지
• /
• 제12권3호
• /
• pp.151-160
• /
• 2006

For even distribution of liquid manure in the field, a boom nozzle type spreader was designed and studied to determined its suitability for small scale crop production farms. Boom nozzle type spreader was compared in the impact triple nozzle and impact single nozzle type spreader. Spreading uniformity of the boom nozzle type liquid manure spreader showed 5.2% (C.V.) and impact single nozzle type spreader showed 6.9% (C.V.). The spreading uniformity of the impact triple nozzle type spreader was quite uneven, therefore, the spreader could be modified as twin nozzle for spreading in orchard farm. The wheel axle height adjustable type liquid manure spreader has higher the stability and it considered much useful on the hilly agricultural land.

• 상하수도학회지
• /
• 제36권5호
• /
• pp.275-287
• /
• 2022

In order to overcome the small scale of Korea waterworks and to achieve comprehensive improvement and innovation transformation, the waterworks integration was reviewed. The effect of consolidation was confirmed by the integration of the water supply business in the southern Gangwon region and the western Gyeongnam region in Korea, such as an increase in the flow rate and a decrease in the production unit cost. After facing management and service limitations overseas, more than 1,000 small-scale waterworks projects in the UK were integrated into 27 waterworks providers, and Japan also revised the Waterworks Act in December 2019 and is in the process of integrating waterworks. It is considered appropriate to promote the integration of waterworks projects in Korea by respecting the autonomy of local governments, but using a participatory method, a win-win method, and a linkage method. For the integration of waterworks projects, three strategies are proposed: First creating a national foundation for integration (revision of the Waterworks Act), Second establishing a waterworks integration strategy led by local governments, Third forming an external consensus and providing incentives for participation.

• 한국수산과학회지
• /
• 제56권3호
• /
• pp.341-346
• /
• 2023

This study aimed to suggest an alternative income generation (AIG) for local artisanal fisheries communities in the southern coastal area of Bangladesh, which is vulnerable to climate change. To analyze the problems of local artisanal fisheries caused by climate change, field surveys and in-depth interviews with fishermen and government officials were conducted. Livelihood risk factor (LRF) in the marine fishing sector included reduction of fishing days and fish production and damage to fishing vessels and fishing gear due to cyclone and sea-level rise. LRF in the aquaculture sector included cultured fish escape, reduction of aquaculture production, and water pollution due to Monsoon flood. A common challenge for two sectors was high interest rate on commercial loans. Small-scale tank aquaculture is recommended as AIG for securing income of artisanal fisheries communities. In the early stages of dissemination of small-scale tank aquaculture technology, it is necessary to prevent fishermen from struggling to repay high-interest rate loans through technology transfer and facility support by official development assistance. The aquaculture training center, along with the technical education, will also contribute toward expansion of local distribution network and marketing support to establish a value chain for local artisanal fisheries communities.

• Journal of Nutrition and Health
• /
• 제39권4호
• /
• pp.417-425
• /
• 2006

The purpose of this study were to a) investigate operation of human resource in contract foodservice management company (CFMC), b) identify the staffing indices for the establishment an labor productivity for CFMC, and c) develop standardized model of staffing demand as foodservice's scale in CFMC. The data was collected using FS intra-net system from 138 contract-managed foodservice operations in A CFMC and statistical analysis was completed using the SAS/win package (ver. 8.0) for description analysis, ANOVA, Duncan multiple comparison, pearson correlation analysis, and regression analysis. The types of operation were included factory (45%), small scale operation (26%), office (11%), department store (10%), training institute (4%), and hospital (3%). The distribution of foodservice scale was classified by meal served was as follows; 'less than 500 meals (47%)', 'from 500 to 1500 meals (25%)', 'from 1500 to 2500 meals (17%)', and 'more than 2500 meals (12%)'. There was two types of contract method, fee-contract (53%) and profit-and-loss contract (46%) Some variables were significantly high operation indices such as selling price, food cost, monthly sales, net profit and others were significantly low operation indices such as labor, meal time a day in the small foodservice on meal scale (p<.001). The more foodservice was large, the more human resource was disposed on dietitian, cook, cooking employee altogether (p<.001). Foodservice in A CFMC was divided into 2 groups by 500 meals a day, according to comparative analysis of labor productivity as meal scale per working hour, meal scale a day and operation indices as meal per foodservice employee, meal per cooking employee (p<.001). The regression equation model was developed as 'the number of employees=1.82+0.014 ${\times}$ meal served' in the operation of less than 500 meals, 'the number of employees=9.42+0.013 ${\times}$ meal scale a day -0.94 ${\times}$ meal scale per working hour' in the operation over 500 meal scale using labor productivity indices and operation indices. Therefore, CFMC could be enhanced efficiency of human resource arrangement using the standardized model of staffing demand and would be increased effectiveness of profit.

• 한국버섯학회지
• /
• 제9권4호
• /
• pp.161-165
• /
• 2011

소규모 병재배 농가는 대규모 농가에 비하여 생산비가 많이 소요되므로 가격경쟁력이 낮다. 소규모 농가에서 인력의 존도가 높은 점을 활용하여 주 생산품목과 유사한 조건에서 동시에 재배가 가능한 다품목의 생산체계를 확립하기 위하여 본 시험을 수행하였다. 그 결과 큰느타리와 버들송이의 재배조건이 유사함을 토대로 공통의 배지를 선발하였다. 병재배용 자동입병기를 사용하여 배지를 충진하였을 때, 배지재료의 종류 및 혼합비율에 따라서 병내의 고상비율은 20~25% 범위로 차이가 있고, 배지의 수분함량 65%에서 액상비율은 38~45, 기상비율은 31~41까지 차이가 많았다. 배지의 최적 수분함량은 버섯 종류와 배지의 조성에 따라서 다른 경향이었다. 큰느타리의 경우 미송톱밥+미강 또는 미송톱밥+건비지 배지는 수분함량 70%, 미송톱밥+밀기울 배지는 65%, 미송톱밥+밀기울+건비지 배지는 67%에서 수량이 많았다. 버들송이는 공시배지 모두 수분함량 70%에서 수량이 많았다. 공시배지중 큰느타리는 미송톱밥+밀기울+건비지 75:20:5(v/v,%), 수분 67%; 버들송이는 미송톱밥+밀기울 75:25(v/v,%), 수분 70% 배지에서 자실체 수량이 많았다. 그리고 미송톱밥+미강+건비지 75:20:5(v/v,%), 수분함량 70% 배지에서 큰느타리와 버들송이는 배양기간, 버섯 발생 및 생육 환경이 비슷하여 공통의 재배용 배지로 사용하기에 알맞았다. 따라서 큰느타리가 주 품목인 소규모 농가에서 큰느타리용 배지의 일부에 버들송이 종균도 접종하여 동일한 재배환경에 안정적인 동시 생산이 가능할 것으로 판단된다.

• 한국콘텐츠학회논문지
• /
• 제20권3호
• /
• pp.390-399
• /
• 2020

본 연구는 특급호텔의 소규모연회 메뉴프로모션에 대한 이용고객의 주관적 인식을 파악 하고자 서울지역을 중심으로 소규모 연회 메뉴프로모션을 이용한 고객을 대상으로 Q방법론을 적용하여 분석을 시도 하였다. 유형분석을 한 결과, 총 4가지로 도출되었다. 제 1유형(N=4): 연회 메뉴 구성 비교 형(Banquet menu configuration comparison type), 제2유형(N=5): 연회 음식 위생 추구 형 (Banquet food hygiene-seeking at a Type), 제 3유형(N=3): 연회 메뉴 품질 만족 형 (Banquet menu quality satisfied type), 제 4유형(N=6): 연회 코스 중점 형(Banquet course focus type)으로 각각의 유형마다 서로 다른 특징이 있는 것으로 분석되었다. 본 연구를 바탕으로 향후 특급호텔의 소규모 연회 메뉴프로모션의 발전 방향성과 국내 호텔업의 호황 그리고 서비스 품질에 관한 연구의 기초자료로 활용될 것으로 판단되며, 주관적 분석 결과를 통해 시사점을 제공하고자 한다.

• 우주기술과 응용
• /
• 제2권2호
• /
• pp.81-103
• /
• 2022

본 논문에서는 근지구 우주환경을 관측하기 위해 국내 최초로 4기가 편대비행으로 운용되는 6U 초소형위성 SNIPE(국문명 도요샛; small scale magnetospheric and Ionospheric plasma experiment )의 본체(BUS) 설계 내용과 개발 과정에 대해 기술하였다. SNIPE는 지구 주위 우주환경을 입체적으로 관측하기 위해 4기가 편대비행을 수행하며, 전리권에서 우주 플라즈마 밀도 및 온도, 그리고 태양 자기장과 전자파 등의 시간적 변화를 동시에 관측한다. 임무 기간은 최소 6개월 이상으로 신뢰성을 높이기 위해 시험인증모델(EQM)과 비행모델(flight model, FM)으로 나누어 개발하였다. 현재 총 4기의 비행모델의 개발을 완료하고 우주환경시험을 모두 마친 SNIPE는 2023년 발사 예정이다. 본 논문에서는 발사를 앞둔 SNIPE 위성 본체의 설계 내용과 개발 과정을 소개하며, 향후 국내에서도 본격적인 임무 수행을 위한 6U급 초소형위성 개발에 유용한 참고 자료가 되기를 기대한다.