• 청정기술
• /
• 제26권2호
• /
• pp.151-157
• /
• 2020

급격한 도시화는 국토의 불투수면을 증가시켜 도시형 홍수의 위험성을 가중시켜왔고, 지하수위의 저하, 수질오염물질 증가 등 환경재해 및 환경오염 문제를 유발시키고 있다. 국내에서는 이러한 환경적 영향을 최소화하고 개발 이전의 물순환 건전성을 유지하기 위해 저영향개발 기법을 도입하여 적용하고 있지만, 소규모 개발사업의 대부분은 강우유출량 관리의 법적 근거가 부재하여 사각지대에 놓여 있다. 이에 빗물의 표면 유출을 증가시키는 소규모 개발사업 또한 오염원인자 책임 원칙에 따라 저영향개발 시설의 적용을 의무화하는 것이 요구되며 이를 위해 물순환 회복 사전협의 제도를 도입하는 것이 필요하다. 본 연구는 소규모 개발사업의 저영향개발기법 도입을 가정하여 비용편익 분석을 중심으로 수행되었다. 비용·편익 분석에 필요한 전국 소규모 개발 대상사업의 규모 및 건수는 『건축법』에 따른 대지면적이 1,000 ㎡ 이상 이거나 건축연면적 1,500 ㎡ 이상의 건축물에 서울시의 실제 사전협의 통계자료를 적용하여 도출하였다. 피규제 기업·소상공인, 피규제 이외 기업·소상공인·일반국민 및 정부를 대상으로 소규모 개발사업의 저영향개발 시설물 설치에 따른 비용·편익을 분석한 결과, 경제성의 기준 값인 1보다 많이 낮은 것으로 확인되었으며 이는 대상사업의 규모 대비 시설물의 설치 비용이 높기 때문으로 사료된다. 하지만 저영향개발 시설의 설치에 따른 수환경 및 대기질 개선 등의 환경적 가치와 하수처리시설 운영비 절감 등의 공공성을 고려하면 향후 소규모 개발사업의 사전협의제도 도입은 필연적이다. 앞으로 소규모 개발사업의 사전협의 제도 도입과 함께 비용·편익을 개선하기 위해서는 지자체의 제도적, 재정적 지원이 적극적으로 요구된다.

• International Journal of Railway
• /
• 제4권2호
• /
• pp.50-55
• /
• 2011

The dynamic stability of railway vehicle has long been one of the important issues in railway safety. The dynamic simulator has been used as a tool for investigating the dynamic stability of railway vehicles and wheel/rail interfaces. In particular, small scale simulators have been widely used in laboratory studies instead of full scale roller rigs which can be quite costly and rather inconvenient for testing out the effect of diverse design parameters. But techniques for design of a small scale simulator for the fundamental study about the dynamic characteristics of the wheel-rail systems and the bogie systems have not been well developed in Korea. Therefore, a research on the development of a small scale simulator for investigating bogie dynamics needs to be undertaken. The present paper investigates design of a small-scaled derailment simulator and the design of a small scale bogie. The simulator developed can be used to investigate the effect of diverse parameters such as attack angle, wheelbase and cant on dynamic behavior of the bogie and key dynamic performance parameters such as derailment coefficient and critical speed.

• 천문학회보
• /
• 제39권2호
• /
• pp.82-82
• /
• 2014

One of the subjects in clouds' structure and development is small scale structure of interstellar cloud. The possibility of AU scale structure (Marscher et al. 1993; Moore & Marscher 1995; Roy et al. 2012) is discussed, and this small scale structure is considered as the result of hydrogen volume density (Moore & Marscher 1995), or small-scale chemical and other inhomogeneities (Liszt & Lucas 2000). In order to study this subject with emission line, extremely high resolution is mandatory by VLBI system. However, the alternative method could be observing the absorption line of interstellar cloud on the continuum object. In this case, the resolution would be restricted to the size of the continuum object, if the size of the object is smaller than the resolution of a used telescope. We observed the previous researchers' three objects (BLLAC, NRAO150, B0528+138), whose spectrums are changed from 1993 to 1998 (Liszt & Lucas 2000), with KVN. Through KVN observation, we found the changes of optical depth spectrum compared with the previous spectrums. We will discuss the optical depth spectrum variation by time variation and the meaning of it.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.159-163
• /
• 2008

The trend of Development Projects has been changing through a few recent years. Small-scale development projects in the past were usually for building residences or officetel in a big cities. making lots of profits. These projects made not only lots of profits but also unbalance between the urban centers and the suburbs. So government made some regulations to prevent the things from being worse anymore, planned to develop the country in balance and began to lead large-scale development project such as Inno city and Newtown. At first, in this study, the phases and the characteristics of development project's change will be looked around. And then, after overview about PFV(project financing vehicle) used a lot in large-scale development projects will be seen, the better ways to use PFV in large-scale development projects are going to be proposed by considering the problems in PFV's conformation.

• 유통과학연구
• /
• 제11권4호
• /
• pp.89-97
• /
• 2013

Purpose - The purpose of this study is to systematically review the background of the Korean distribution promotion policy and distribution adjustment policies along with related regulations and policies. Research design, data, and methodology - Domestic distribution policy and relevant laws were examined through a review of existing research literature. The results of the development process of the domestic distribution policy, promotion policies, and adjustment policies are summarized below. Results - The results are summarized as follows. First, the purpose of the development of the domestic distribution promotion policy was to strengthen the competitiveness of the small and medium business industry through structural advancement of the small and medium industry. By expanding the managerial base for the small and medium industry, a new balance could be created in the national economy. There was a requirement for an early assistance policy for small and medium businesses as a base of these businesses in the distribution industry developed from their original model of catering to a traditional market of retail shops. Since 1996, there was a need for this early assistance policy due to the expansion and rapid growth of large scale stores causing a change in the consumption pattern for distribution markets and the decline of large enterprises. Second, the government supports small and medium business distribution through distribution promotion policies by supporting an organization promoting small business and supporting innovation in the distribution system. Third, in 1961 a business mediation system was established to protect small and medium industries. The Small and Medium Business Administration advises conglomerates to postpone acquisitions, restrain expansion of the business, or to reduce business scale if small businesses undergo an adverse effect such as decreasing demand because large companies are expanding into their areas. Fourth, the Distribution Adjustment Policy managed large-scale store regulation as follows: ① limitation on construction by urban planning ordinance, ② limitation on location based on traffic impact assessments, ③ regulation based on business guidelines by chiefs of autonomous bodies, ④ regulation on mandatory holidays and limitation of business hours. This large-scale store regulation is a policy introduced by authority to increase competitiveness of small and medium business distribution by the government. Conclusions - As discussed in this study, the distribution promotion policy and distribution adjustment policy are government distribution policies focused on the protection of the small and medium distribution businesses. This study is timely, since it was planned when the strengthening of the revisions of the Distribution Industry Development Act, aimed to protect small and medium retailers and merchants, was under discussion. The significance of this study is that it offers insights for the development of new policies in the future and an opportunity to consider the background of the distribution policy by the government.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권2호
• /
• pp.118-122
• /
• 2000

A comlementary call line CR2 is curretly used to propagte the Disabled Infectious Single Cycle Herpes Simplex Virus Typee2 (DISC HSV-2) on a small Iaboratory scale upto 15 L. These cultures are initiated by passaging the cells from roller bottle cultures. Whilst this is suitable for the laboratory scale it is totally impractical for use in seeding an industrial manufacturing scaled version of the culture. It is paramount to have a robust system for passaging cells from a small microcarrierier culture system to a larger one by a serial subculturing regime. Here we report on the successes we have had in our laboratory in scaling up out production system for the DISC HSV-2 from small 1-L cultures to a 50-L vessel with the maintenance of the viral productivity. Ease of use, reproducibility and the need to minimise overall production time were factors which were taken into consideration whils developing our procedures. We were aware of the need to keep a production train simple and as short as possible as this was the amall scale study for an envisaged manufacturing process.

• 국토계획
• /
• 제54권7호
• /
• pp.5-23
• /
• 2019

The central government has implemented policies to strengthen the competitiveness of small and medium sized cities for balanced development at the national scale. However, since it is often difficult to enhance the competitiveness through partial projects of each jurisdiction, many local governments collaborate at the regional scale. This suggests that a regional approach is important for the management of small and medium sized cities. On the one hand, the concept of network city suggests that various functional networks can affect the growth of small and medium sized cities. Given this background, the purposes of this study are to delineate regional boundaries at national scale and identify their relations of growth by using functional network and Moran's I index. The study uses the Markov-chain model and cluster analysis to delineate the regions, and Moran's I is employed to identify the relations of growth. The results show that interactions between jurisdictions through networks could be crucial factors for growth of small and medium sized cities, while the networks based on passenger travel and freight movement have different implications. The results suggest that policy makers should not only consider local level investments, but also take the characteristics of networks between cities into account for achieving balanced development and developing regeneration policies.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1085-1091
• /
• 2011

The dynamic stability of railway vehicle has been one of the important issues in railway safety. The dynamic simulator has been used in the study about the dynamic stability of railway vehicle and wheel/rail interface. Especially, a small scale simulator has been widely used in the fundamental study in the laboratory instead of full scale roller rig which is not cost effective and inconvenient to achieve diverse design parameters. But the technique for the design of the small scale simulator for the fundamental study about the dynamic characteristics of the wheel-rail system and the bogie system has not been well developed in Korea. Therefore, the research about the development of the small scale simulator and the bogie has been conducted. This paper presents the design of the small-scaled derailment simulator and the example design case of a small scale bogie. The simulator could be used in the study about the effect of diverse parameters such as attack angle, wheelbase and cant on dynamic behavior of the bogie and the safety parameter such as derailment coefficient and critical speed.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.776-783
• /
• 2018

This paper proposes an improved test and evaluation methodology to be conducted for a in-flight threat-countermeasure encounter scenario. Although the conventional test method adopted in the precedent researches allows high precision and safety, such full-scale method is practically not appropriate to apply to small-scale test rounds for evaluating the subparts of the ammunition. To address this problem, this study suggests a readily-applicable, small-scale test and evaluation method of the subpart of the ammunition in firing test. In the threat-countermeasure encounter scenario, the results of several tests demonstrate that the proposed technique does not deteriorate the precision when the engagement point should be adjusted.

• 한국항공우주학회지
• /
• 제37권10호
• /
• pp.975-983
• /
• 2009

본 논문은 동축반전 로터 블레이드의 성능 특성 파악을 위한 선행연구로서, 단일 로터 블레이드에 대한 공력 데이터 획득 및 성능 특성을 확인하기 위한 연구에 중점을 두었다. 이를 위해 제자리 비행 상태에서 추력과 토크의 측정이 가능한 소형 로터 블레이드용 회전 시험장치를 구성하고 제작하였다. 로터 회전 시험장치는 회전장치부, 센서부, 그리고 데이터 획득 시스템으로 구성되었으며, 고정된 회전속도에서 콜렉티브 피치각을 변화시키면서 추력과 토크를 측정할 수 있도록 하였다. 이를 통하여 저 레이놀즈 수 ($Re{\approx}3{\times}10^5$) 영역에서 운용되는 단일 로터의 제자리 비행 성능 시험을 수행하였고 소형 로터 블레이드의 제자리 비행 성능을 획득하여 로터 회전 시험장치의 성능을 검증하였다.