• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.6
• /
• pp.31-38
• /
• 2016

The purpose of this study was to assess nonpoint sources (NPS) pollution affected by liquid manure and regulating gate in a small agricultural watershed. The study area, which is a wide plain farmland, was operating by the Buyong regulating gate in order to maintain irrigation water level during irrigation period. Consequentially, runoff only occurs through the gate at each event in rainy season for avoiding farmland inundation. In addition, the usage ratio of liquid manure in the study area has been increased greatly since 2014. Discharge loads at the Hwaingsan bridge subwatershed were 1.2 times for T-N, 4-10 times for T-P, and 3-8 times for TOC compared with the Soyang watershed (control) during study period. The reason was that NPS pollutants from upper Gpeun and Sangri bridge subwatersheds, which are widely spraying with livestock liquid manure, were stack at this subwaterehd because of regulating gate in non-rainy seasons. A number of agricultural watersheds in Saemangeum watershed are affected by regulating gate and vigorous livestock activities so that substantial management schemes under controling regulating gate are needed for minimizing livestock related NPS.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.283-290
• /
• 2008

In this paper, experiments with an air-breathing proton exchange membrane fuel cell (PEMFC) for mobile devices were carried out according to cathode conditions. These conditions are defined by the cathode flow field plate type (the channel type, the open type) and the cathode surface direction. Single-cell and 6-cell stack were used in the experiments. The experimental results showed that the open-type cathode flow field plate gave a better performance than the small channel type. In the experiments related to the direction of the slits on the cathode flow field plate, the horizontal slit cell was better than the vertical one. With respect to the cathode surface direction, when the cathode surface is placed in the direction normal to the ground, the PEMFC generated more stable power in the mass transport loss region. Since stable power in the mass transport region is closely related to the air supply, computational fluid dynamics (CFD) analysis for air-breathing PEMFC of different cathode surface directions was performed.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.258-261
• /
• 2011

A ferroelectric $(Bi,La)_4Ti_3O_{12}$ (BLT) thin film fabricated by the pulsed-DC sputtering method was evaluated on a cell structure to check its compatibility to high density ferroelectric random access memory (FeRAM) devices. The BLT composition in the sputtering target was $Bi_{4.8}La_{1.0}Ti_{3.0}O_{12}$. Firstly, a BLT film was deposited on a buried Pt/$IrO_x$/Ir bottom electrode stack with W-plug connected to the transistor in a lower place. Then, the film was finally crystallized at $700^{\circ}C$ for 30 seconds in oxygen ambient. The annealed BLT layer was found to have randomly oriented and small ellipsoidal-shaped grains (long direction: ~100 nm, short direction: ~20 nm). The small and uniform-sized grains with random orientations were considered to be suitable for high density FeRAM devices.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.744-749
• /
• 2005

In this paper, a lens actuator for mobile devices is proposed using stack type piezoelectric materials. In general, the deformation of PZT actuators is not enough for lens motion when the allowed voltage is applied. The small stroke problem can be solved by accumulating a lot of small displacements in high frequency. In this paper, a new inch-worm type model for focusing actuator is suggested based on the interaction of inertial and frictional forces. Theoretical analysis and simulation using ANSYS are performed to verify the feasibility of the inch-worm PZT actuator model. Various types of clamps are considered to determine the effect of frictional force on the motion, and appropriate clamp-actuator models are proposed. The proposed models are experimentally verified and the experimental results show high correspondence with theoretical and simulated values. The inch-worm type focusing actuator enable a large stroke with 7.79 mm/sec with 10kHz and 10V.

• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.207-213
• /
• 2003

Carbon-14 is one of the major radionuclides released by CANDU Nuclear Power Plants(NPPs). It is almost always emitted as gas through the stack. From CANDU NPPs about 95% of all carbon-14 is released as carbon dioxide. Carbon-14 is a low energy beta emitter which, therefore, gives only a small skin dose from external radiation. As carbon dioxide Is physiologically rather inert gases for man's metabolism, the inhalation dose is probably less than 1 % of the ingestion dose. But this source of carbon-14, formed in a closed, nor-oxidative environment, was subsequently released into the workplace as an insoluble particulate when these systems were opened lip for re-tubing at CANDU NPPs. As a part of the improvement of dosimetry program at Wolsong Nuclear Power Plants, the carbon-14 metabolism based on references was investigated and studied to setup the internal dosimetry program due to inhalation of carbon-14.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.361-366
• /
• 2016

This paper presents the ESD protection circuit with improved electrical characteristic and area efficiency. The proposed ESD protection circuit has higher holding voltage and lower trigger voltage characteristics than the 3-Stacking LVTSCR. In addition, it has only two stages and has improved Ron characteristics due to short discharge path of ESD current. We analyzed the electrical characteristics of the proposed ESD protection circuit by TCAD simulator. The proposed ESD protection circuit has a small area of about 35% compared with 3-Stacking LVTSCR, The proposed circuit is designed to have improved latch-up immunity by setting the effective base length of two NPN parasitic bipolar transistors as a variable.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.3
• /
• pp.159-167
• /
• 2005

Quantization effects (QEs), which manifests when the device dimensions are comparable to the de Brogile wavelength, are becoming common physical phenomena in the present micro-/nanometer technology era. While most novel devices take advantage of QEs to achieve fast switching speed, miniature size and extremely small power consumption, the mainstream CMOS devices (with the exception of EEPROMs) are generally suffering in performance from these effects. In this paper, an analytical model accounting for the QEs and poly-depletion effects (PDEs) at the silicon (Si)/dielectric interface describing the capacitance-voltage (C-V) and current-voltage (I-V) characteristics of MOS devices with thin oxides is developed. It is also applicable to multi-layer gate-stack structures, since a general procedure is used for calculating the quantum inversion charge density. Using this inversion charge density, device characteristics are obtained. Also solutions for C-V can be quickly obtained without computational burden of solving over a physical grid. We conclude with comparison of the results obtained with our model and those obtained by self-consistent solution of the $Schr{\ddot{o}}dinger$ and Poisson equations and simulations reported previously in the literature. A good agreement was observed between them.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.29-37
• /
• 2017

Compared to the commercial networks, R&E networks have the strength such as flexible network engineering and design. Based on those features of R&E networks, we propose our storage cloud service model which supports general-purpose network users in a central region and experimental network users in distributed regions simultaneously. We prototype our service model utilizing multiple proxy controllers of OpenStack Swift service in order to deploy several regions via experimental backbone networks. Our experiments on the influence of the network latency and the size of data to be transmitted show that the bigger size of data is preferable to the smaller size of data in an experimental backbone network where the network latency increases within 10ms because the rate of throughput decline in the bigger object is comparatively small. It means that our service model is appropriate for experimental network users who directly access the service in order to move intermittently high volume of data as well as normal users in the central region who access the service frequently.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.1-7
• /
• 2011

Sound waves and acoustic energy generated by two identical TA (ThermoAcoustic) lasers were analyzed and studied. One end of the ceramic stack was heated by a thin NiCr wire wound around that end. The other end of the stack was cooled by natural convection of atmospheric air. The wavelength of the sound waves generated by a single TA laser was four times the tube length and the amplitude of the waves increased with the heating rate. SPL (SoundPressure Level) meters and microphones were employed to measure and study the sound waves at different distances from the glass tube opening and at the focusing point of the TA laser pair for different laser position arrangements. The sound waves of the two TA lasers at the focusing point were found to be almost 180 degrees out of phase when the openings of the two lasers were very close to each other and the angle between the laser axes was small. When the two TA lasers were placed far apart, the sound wave amplitudes and the phase difference between the two laser outputs varied periodically with time. The frequencies of the sound waves changed when the openings of the two TA lasers were in close vicinity and the angle between the laser axes exceeded a certain value. In this case, the glass tube opening was no longer a pressure anti-node and the wavelength of the fundamental mode was not equal to four times the tube length.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.93-100
• /
• 2010

In this paper, we propose a technique which makes it faster to delete prefixes in an IP address lookup architecture based on parallel TCAMs. In previous deletion schemes, more than one memory movement is needed for the prefix ordering and keeping the available memory space consecutive. For deletion, our scheme stores the address of the deleted prefix in a stack implemented by SRAM instead of actual movement in TCAM. Since SRAM has very short latency compared to TCAM, the proposed scheme can accomplish fast updating. From the experiment with the real forwarding table and update trace, we evaluate the performance of our scheme in terms of the memory access time for the prefix insertion and deletion. The experiment result also shows good performance with considerably small size of stack.