• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.2
• /
• pp.109-117
• /
• 1997

In order to hold the behavior of fish school to the set-net, a series of tag-recapture experiments were carried out in two fishing grounds of the middle sized set-nets which were located in 20m depth on the coast of Keojedo and Namhaedo in the Southern part of Korea from September to October in 1996. In the experiments, the leading ability of the leader and the fish court and the recapturing ability of the bag nets were checked out for the six species of fish in method of discharging the tagged fishes at side points of leader, and the middle points of the fish court and the bag nets in a hauling step, and recapturing them at the bag nets in the next hauling. The results obtained are as follows; 1. The ratio recaptured at the both side bag-nets in the next hauling after discharged from the fish court in the previous step was 20.3% in small size of mackerel Scomber japonicus, 16.2% in small size of horse mackerel Trachurus japonicus, 10.3% in black sea-bream Acanthopagrus schlegelii, 19.1% in red barracuda Syhyraena pinguis, 16.3% in halfbeak Hemiramphus sajori, 20.0% in gizzard shad Konosirus punctatus individually, and totally in six species of fish, that was 17.2%. 2. The ratio recaptured at the same bag net after discharged in the both side bag-nets was 21.7% in small size of mackerel, 21.5% in small size of horse mackerel, 6.7% in black sea-bream, 17.8% in red barracuda, 16.8 in half-beak, 19.1% in gizzard shad individually, and totally in six species of fish, that was 18.8%. 3. The leading ratio from side points of the leader departed from door in 25m to fish court was 58.9% in small size of mackerel, 74.6% in small size of horse mackerel, 38.0% in black sea-bream, 54.7% in red barracuda, 58.6% in half-beak, 54.5% in gizzard shad individually, and totally in six species of fish, that was 57.8%. So it was assumed that the leader of set-net was very effective in leading to the swimming direction of small size of mackerel, small size of horse mackerel, red barracuda, half-beak and gizzard shad. 4. Red barracuda, half-beak and gizzard shad entered into bag net of upstream in large numbers than bag net of downstream, and small size of horse mackerel and black sea-bream entered into bag net of downstream in large numbers than bag net of upstream. 5. Small size of mackerel and small size of horse mackerel had high remaining rate in the bag net of downstream, and black sea-bream, red barracuda and half-beak had high remaining rate in the bag net of upstream.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.332-337
• /
• 2009

The importance of the evaluation and verification of small-size cogeneration system has been emphasized because there is no KS-code related to the small-size cogeneration system. The evaluation method of small-size engine cogeneration system, regarding Japanese standard JIS B-8122 and international standard organization, ISO-8528, was applied to the system. The evaluation methods, start-test, rapid-load-up and rapid-load-down, etc. were executed at the system, and reasonable results were acquired. The electrical and thermal efficiencies were executed and analyzed at various load conditions. The NOx emission at various load condition was also measured. Finally, the gas engine cogeneration system was installed to a site for actual usage and it was continually operated during more than 6 months as the site condition.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.234-238
• /
• 2015

When we use a Finite Elements Method (FEM) to solve a linear static analysis problem, number of elements need to be sufficiently small for convergence of the solution. If we analysis a part, whose curvature is varying heavily, we face to determine how small the elements size is, because the calculated stress is increased as the elements are smaller. In this case, we need to analysis with mesh insensitive method, stress linearization. We can get a solution that is not varying with the elements size if the size is smaller than a certain level. In this paper, we evaluate a pressure vessel having geometrical discontinuities using stress linearization. First, we analysis the vessel with global model, including all part of the vessel, using large shell elements. Second, we analysis the local part of the vessel, which is the small part occurring maximum stress, using small continuum elements. Last, we evaluate the safety of the pressure vessel according to the ASME Sec. VIII Div 2.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.721-722
• /
• 2006

Industrialization and technique consequently in quick development the motor field small size and light weight, high efficiency and highly energy density in necessity. The permanent magnet motor small size and the research regarding the research of the torque and efficiency is coming to be active. From this paper the research regarding the quality permanent magnet motor and analysis and it was developed recently the NdFeB anisotropic bond magnet which is a high magnetic force material use, from the hazard which accomplishes power density it is high permanent magnet motor of small size and light weight it researched. The Finite Element Method it led and motor optimization. Also the experiment and analysis permanent magnet motor it is improved the motor and result it led and different it compared.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.697-699
• /
• 2017

A novel structure of phase locked loop (PLL) which has small size with D Flip-Flop and sub charge pump has been proposed. The area of loop filter usually occupying the larger portion of the chip is minimized using a single small capacitor. It has been simulated and proved by HSPICE in a CMOS $0.18{\mu}m$ 1.8V process.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1261-1263
• /
• 2005

The micro permanent magnet(PM) type stewing motor preferred solution for many small electronics position determination devices since it is small in size. Thus, there are growing demands for PM type stepping motor that greater mechanical output, smaller size. But, the design of the it, having high performance and small size is very difficult because of its complex mechanical structure. This paper deals with a development of the newly structured micro PM type stepping motor with claw-poles. We introduced the small-sized PM type stepping motor that has new structure and analyzed the magnetic characteristic of it versus general type model using 3-D finite element analysis(FEA).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.942-945
• /
• 2006

In order to measure the sound transmission loss(STL) of a test specimen such as windows, which is smaller than the test opening, a special partition is built into the test opening and the specimen is placed in that partition. This paper discusses how the measured STL is changed by the partition when a small-size window of high sound insulation is mounted. Theoretical and experimental investigations are carried out to quantify the effect of the filler wall. The results reveal that the smaller the window size is, the higher sound insulation performance of the filler wall is required in order to measure the accurate STL of the specimen. It is found that the insufficient sound insulation of the filler wall leads to the lower measured value of the window's STL.

• Korean Journal of Child Studies
• /
• v.22 no.4
• /
• pp.201-212
• /
• 2001

The purpose of this study was to analyze toddlers' verbal and nonverbal interaction with their peers and caregivers according to the class size of child care centers in Seoul. The subjects of this study were 20, two-year-old(M=32.5 month) toddlers with peers and caregivers from child care centers in different class sizes, but with same caregiver-toddler ratio. Verbal and nonverbal interactions were videotaped during one hour indoor free play per child in the center. According to the class size, the results were as follows : 1) Toddlers in the small class played more cooperatively with peers, and uttered more regulative or directive words than those in the large class. 2) Toddlers in the large class were more aggressive than those in the small class. 3) Caregivers in small class expressed more empathetic behaviors to a toddler than those in large class.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.68-78
• /
• 2005

The purpose of this study was to examine the women consumers' clothing consumption value and involvement according to size of the city. 538 females living in Seoul(large city) and Jecheon(small city) were surveyed for this study. For data analysis, factor analysis, t-test, and regression were used. For clothing consumption value, five factors of value were founded and labeled as functional, emotional, epistemic, social and conditional value. Three factors of clothing involvement were also identified as clothing/fashion, symbolism and reasonability involvement. Size of the city influenced total clothing consumption value and involvement. Also, size of the city influenced clothing consumption value and involvement factors. When the cities were divided into two groups(large and small city), they showed different clothing consumption values and involvements according to the demographic variables.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1567-1575
• /
• 1996

This paper presents a new power control method for compensating the short term fading of the reverse link channel in the CDMA mobile telephone system. The fixed step closed loop power control which is now adopted in IS-95, is very simple in structure. However, the step size in the closed loop power control is too big for the channel with a small variation or too big for the channel with a small variation or too small for the channel with a large variation. The method presented in this paper has a simple structure and shows a new model employing the combination of the fixed step size method and variable step size method which results in compensatingthe disadvantages mentioned above. This paper also evaluates the performance inthe fundamental channel model.