• 한국광학회지
• /
• 제33권3호
• /
• pp.99-105
• /
• 2022

자유 공간 광통신 시스템에서 발생하는 대기 외란에 의한 광신호 변동을 억제하기 위하여 전광(all-optical) 자동 이득 조절(automatic gain controlled, AGC) 어븀 첨가 광섬유 증폭기(erbium-doped fiber amplifier, EDFA)를 활용할 때의 성능을 실험적으로 평가하였다. EDFA에 입력되는 광신호 입력을 -30 dBm과 -10 dBm으로 각각 설정하여 증폭기가 소 신호 영역과 포화 영역에서 동작할 때의 성능을 실험적으로 비교하였다. 이 때 광신호의 요동은 음향 광학 변조기(acousto-optic modulator, AOM)를 활용하여 구현하였다. 실험 결과로부터 EDFA가 소 신호 영역에서 동작하며, 피드백되는 증폭된 자발 방출(amplified spontaneous emission, ASE) 광 전력이 0 dBm으로 증폭기를 포화시킬 수 있는 경우에 가장 작은 광신호 요동 특성을 얻을 수 있음을 확인하였다.

• 경영과학
• /
• 제16권1호
• /
• pp.39-50
• /
• 1999

This paper proposes a new call admission control method to enhance the reverse link capacity of a cell with heavy traffic in the CDMA PCS system under the uneven traffic load between cells. Since the capacity of a cell in the CDMA system is restricted by the total interference caused by terminals in the own cell and the adjacent cells, we can enhance the capacity of a cell by reducing the interference from other cells if possible. Our power control method allows that the signal powers received in base stations with heavy traffic be larger than those received in base stations with light traffic in order to make the interference due to other cells in the cells with heavy traffic relatively small. In the previous study, it was assumed that the signal power received by each base station in the CDMA PCS system is same when the call admission control algorithm is implemented. We could show that the reverse link capacity of a cell in the CDMA PCS system can be increased about 20% under our call admission control method.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권11호
• /
• pp.544-547
• /
• 2006

In this paper, we present a temperature-controlled system for MEMS electrical resistance heaters without a temperature sensor. To rapidly control the heater temperature, the microheater system developed consists of a power supply, power amplifier, digital ${\underline{P}}roportional-{\underline{I}}ntegral-{\underline{D}}ifferential$ (PID) controller, and a quarter bridge circuit with the microheater and three resistors are nominally balanced. The microheaters are calibrated inside a convection oven to obtain the temperature coefficient with a linear or quadratic fit. A voltage amplifier applies the supply voltage proportional to the control signal from the PID controller. Small changes in heater resistance generate a finite voltage across the quarter bridge circuit, which is fed back to the PID controller to compare with the set-point and to generate the control signal. Two MEMS microheaters are used for evaluating the developed control system - a NiCr serpentine microheater for a preconcentrator and a Nickel microheater for ${\underline{P}}olymerase\;{\underline{C}}hain\;{\underline{R}}eaction$ (PCR) chip.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.501-504
• /
• 2000

In this paper the PC power supply is studied from the point of system stability. The power stage model of a multiple output forward converter with weighted voltage mode control is derived including all the major parasitic components and the small signal model is also derived. Determination of the weighting factors and a design procedure for the loop compensation are presented. Finally the model is verified through the simulation of three output forward converter with SABER.

• 전기의세계
• /
• 제22권4호
• /
• pp.11-16
• /
• 1973

This paper presents an optimum control of the field resistance for the self-excited DC shunt generator to keep a constant terminal voltage in case of the load change or the torque variation in the system. The non-linearity of the system is linearized by applying the small signal technique and the linearized equation is solved by the maximum principle with the digital computer. The optimal control value of the field resistance for the step error of the generator output voltage is obtained and the transient voltage characteristics in the system are investigated.

• 한국ITS학회 논문지
• /
• 제13권4호
• /
• pp.12-19
• /
• 2014

최근 교통약자의 이동편의증진을 위한 보행권 확보가 강조되고 있으나 차량 중심의 신호운영 설계로 교통약자 우선 신호 도입은 미비하다. 특히 교통약자는 횡단에 소요되는 통행시간이 일반인에 비해 상대적으로 길기 때문에 일반인 기준으로 적용된 신호운영으로 인해 위험에 노출되기도 한다. 본 연구에서는 교통흐름을 고려하여 차량의 지체를 최소화하는 동시에 횡단신호 시간을 증가시켜 교통약자가 안전하게 도로를 횡단할 수 있는 전략을 제안하였다. 이를 위해, 교통흐름을 고려한 교통약자 우선신호 운영전략을 개발하고 실제 현장에 적용 및 전산모의실험을 통해 기존의 신호운영방법인 고정식 운영(일반인/교통약자) 및 교통약자 우선신호의 적용과 비교 분석한 결과, 보행자 지체시간은 일반신호 운영의 경우 보다 4.7sec/ped(6.2%) 감소되는 것으로 나타났으며, 차량의 통행속도는 일반신호 운영 보다 1.4km/h(8.5%), 고정식 교통약자신호 운영 보다 2.1km/h(13.3%)이 증가하였고 통행시간은 일반신호 운영 보다 18sec/veh(16.2%), 고정식 교통약자신호 운영 보다 34.2sec/veh(26.9%)이 감소하는 것으로 나타났다. 분석결과를 통해 교통약자가 안전하게 도로를 횡단할 수 있는 횡단시간을 제공하면서 동시에 통과차량의 지체를 줄일 수 있는 것으로 판단된다.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1105-1118
• /
• 2015

Battery energy storage devices (ESDs) have become more and more commonplace to maintain the stability of islanded power systems. Considering the limitation in inverter capacity and the requirement of flexibility in the ESD, the droop control was implemented in paralleled ESDs for higher capacity and autonomous operation. Under the conventional droop control, state-of-charge (SoC) errors between paralleled ESDs is inevitable in the discharging operation. Thus, some ESDs cease operation earlier than expected. This paper proposes an adaptive accelerating parameter to improve the performance of the SoC error eliminating droop controller under the constraints of a microgrid. The SoC of a battery ESD is employed in the active power droop coefficient, which could eliminate the SoC error during the discharging process. In addition, to expedite the process of SoC error elimination, an adaptive accelerating parameter is dedicated to weaken the adverse effect of the constraints due to the requirement of the system running. Moreover, the stability and feasibility of the proposed control strategy are confirmed by small-signal analysis. The effectiveness of the control scheme is validated by simulation and experiment results.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2005년도 추계학술대회 논문집
• /
• pp.365-368
• /
• 2005

This paper describes the implementation of autonomy in the motion of a small size human robot. Traditional modeling of environment and concept of moving planning have limitations to adapt the change of environment and to implement in real-time operation. To overcome these limitations, we designed a behavior-based control algorithm and applied to robot soccer. Based on experiment, we verify that the behavior-based control algorithm works well in the change of environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.605-607
• /
• 2004

A class D digital audio amplifier with small size, low cost, and high quality is positively necessary in the multimedia era made of home theater system and the digital audio broadcasting (DAB). It is impossible to analyze the stability of the digital audio amplifier, which is based on the PWM signal processing. To solve this problem, the digital audio amplifier is analyzed using variable structure control theory which is one of nonlinear system theories. Moreover, the magnitude and the frequency of ripple signal, which generated by hysteresis in the comparator, is obtained using describing function which is useful to represent the input-output relation of nonlinear system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.93-96
• /
• 1999

Solar cell generate DC power from sunlight whose power is different at any instance according to condition of variables : insolation and temperature. In order to improve the system utility factor and efficiency of energy conversion, it is desirable to operate the PV system at maximum power point of solar cell under different condition. In this paper, Boost chopper is controlled it output voltage with a new discrete control algorithm for MPPT. PWM signal of DC-DC converter are generated with a 89C51 microcontroller. Switching frequency of DC-DC converter is set at 10KHz. Simulation and experimental results show that the PV system studied in this paper is always operated at maximum power point under different maximum power point of solar cells having stabilized output voltage waveform with relatively small ripple component