• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2368-2375
• /
• 2015

To accommodate various navigational commands, a humanoid should be able to change its walking motion in real time. Using the modifiable walking pattern generation (MWPG) algorithm, a humanoid can handle dynamic walking commands by changing its walking period, step length, and direction independently. If the humanoid is given a command to perform an infeasible movement, the algorithm substitutes the infeasible command with a feasible one using binary search. The feasible navigational command is subsequently translated into the desired center-of-mass (CM) state. Every sample time CM reference is generated using a zero-moment-point (ZMP) variation scheme. Based on this algorithm, various complex walking patterns can be generated, including backward and sideways walking, without detailed consideration of the feasibility of the navigational commands. In a previous study, the effectiveness of the MWPG algorithm was verified by dynamic simulation. This paper presents experimental results obtained using the small-sized humanoid robot platform DARwIn-OP.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2420-2426
• /
• 2015

This paper proposes an evolutionary optimization approach for optimal hopping of humanoid robots. In the proposed approach, the hopping trajectory is generated by a central pattern generator (CPG). The CPG is one of the biologically inspired approaches, and it generates rhythmic signals by using neural oscillators. During the hopping motion, the disturbance caused by the ground reaction forces is compensated for by utilizing the sensory feedback in the CPG. Posture control is essential for a stable hopping motion. A posture controller is utilized to maintain the balance of the humanoid robot while hopping. In addition, a compliance controller using a virtual spring-damper model is applied for stable landing. For optimal hopping, the optimization of the hopping motion is formulated as a minimization problem with equality constraints. To solve this problem, two-phase evolutionary programming is employed. The proposed approach is verified through computer simulations using a simulated model of the small-sized humanoid robot platform DARwIn-OP.

• Journal of KSNVE
• /
• v.6 no.5
• /
• pp.567-574
• /
• 1996

This paper concerns an articulated space robot with flexible links. The equations of its motion are derived by means of the Lagrangian mechanics. Assuming that magnitude of elastic motions are relatively small, the perturbation approach is taken to separate the original equations of motion into linear and nonlinear equations. Th effect the desired payload motion, open loop control inputs are first determined based on the nonlinear equations. One the other hand, in order to reduce the positional errors during the maneuver, vibration suppression is actively done with a feedforward control for disturbance cancellation to some extent. Additionally, for performance robustness against residual disturbance, an LQ control modified to have a prescribed degree of stability is applied based on the linear equations. Measurement equations are formulated to be used for the maximum likelihood estimator to reconstruct states from the original robot equations of motion. Finally, numerical simulations show effectiveness of the proposed control design scheme.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.4
• /
• pp.246-257
• /
• 2004

This paper proposes two contributions. One is an analysis for the limit of the subject of goal-directed reactive robot navigation, and the other is an effective navigation method employing the scheme of the subject. The analysis for the subject is presented in order to clarify the limit of the method. On the basis of the analysis, a safety-guaranteeing and deadlock-free reactive navigation method is newly proposed. The proposed method has a simple behavior-based frame such that it can make the required navigation tasks such as obstacle avoidance, deadlock resolving, and etc. with a very small set of behaviors in entirely unknown environments such as a living room, an office, and etc. Some results of experiments show these validities.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.225-228
• /
• 1996

This paper concerns a SCARA type robot with the second arm flexible. Its equations of motion are derived by the Lagrangian mechanics. For controller design, the perturbation approach is taken to separate the original equations of motion into linear equations describing small perturbed motions and nonlinear equations describing purely rigid motion of the robot. To effect the desired payload motion, open loop control inputs are first determined based on the inverse dynamics of the latter. Next, in order to reduce the positional error during maneuver, an active vibration suppression is done. To this end, a feedback control is designed for robustness against disturbance on the basis of the linear equations and the LQR theory modified with a prescribed degree of stability. The numerical simulations results show the satisfactory control performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.89.2-89
• /
• 2001

Wheel chair bound persons need assistance since there are many steps or curbs or other obstacles blocking their path in the roadways and walkways. Although a step may be small, it may be very difficult for such a person to climb over it. Therefore, we are proposing a power assist wheel chair robot that enables a wheel chair bound person to climb over steps up to about 10 centimeters in height without assistance from others. By using the proposed wheel chair robot, a user can maintain inverse pendulum control after raising its front wheels Then, a user can move forward to the step maintaining the inverse pendulum control, and can climb over the step using motor force of a rear wheel shaft ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.133.6-133
• /
• 2001

Reactor vessel is one of the most important equipment of Nuclear Power Plant (NPP) with regard to the nuclear safety. Thus reactor vessel must be examined periodically by certified experts. Currently, ultra-sonic(UT) non-destructive inspection is executed on reactor vessel. Two different techniques are used in this inspection. One is using the movable manipulator fixed with the support-guide placed on the vessel, and the other is using mobile robot moving in the vessel. Movable manipulator machine is very heavy, hard to handle, and very expensive. Mobile robot equipment is small and convenient but has a weak point on positional precision. To solve these problems we developed a reactor inspection system based on laser-driven mobile robot. This paper describes the main concept and structure of integrated inspection units and the feature of implemented units.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.1-12
• /
• 2004

This paper presents an adaptive fuzzy backstepping (AFB) controller for a single-link flexible joint robot in the Presence of Parametric uncertainties and external disturbances. Adaptive fuzzy logic systems are used as universal approximators to counteract the model uncertainties coming from robot dynamics and to compensate for the nonlinearities coming from adaptive backstepping method. The approach suggested herein does not require neither an additional supervisory nor a robustifying controller and guarantees that tracking error is uniformly ultimately bounded (UUB) within a sufficiently small residual set. Finally, a simulation result is given to demonstrate the robust tracking performance of proposed design method.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.69-76
• /
• 2008

The self-organizing feature map(SOFM) among a number of neural network uses a randomized small valued initial weight vectors, selects the neuron whose weight vector best matches input as the winning neuron, and trains the weight vectors such that neurons within the activity bubble are moved toward the input vector. On the other hand, the modified method in this research uses a predetermined initial weight vectors of the 1-dimensional string, gives the systematic input vector whose position best matches obstacles, and trains the weight vectors such that neurons within the activity bubble are move toward the opposite direction of input vector. According to simulation results one can conclude that the method using string and the modified neural network is useful tool to mobile robot for the global path planning.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.619-624
• /
• 2014

This paper introduces a robot-based learning system which is designed to teach multiplication to children. In addition to a small humanoid and a smart device delivering educational content, we employ a type of mixed-initiative operation which provides enhanced multi-modal cognition to the r-learning system through human intervention. To investigate major factors that influence people's intention to use the r-learning system and to see how the multi-modality affects the connections, we performed a user study based on TAM (Technology Acceptance Model). The results support the fact that the quality of the system and the natural interaction are key factors for the r-learning system to be used, and they also reveal very interesting implications related to the human behaviors.