• 제목/요약/키워드: Small industry

검색결과 3,005건 처리시간 0.037초

잠사류의 균형 가격모색 (An Alternative Approach for Setting Equilibrium Prices of Sericultural Products)

  • 이질현
    • 한국잠사곤충학회지
    • /
    • 12호
    • /
    • pp.47-50
    • /
    • 1970
  • 우리나라 잠업을 발전시킴에 있어 하나의 기본요소는 생산업자의 생산활동을 자극할 수 있는 가격수준이다. 본 분석에서는 잠업의 대회적 제한요인인 국제사가를 상한으로 하여 양잠과 제사부문을 균형적으로 발전시킬 수 있는 균형가격수준의 결정방법에 대한 대체안을 제시코자 하였다. 한국은행의 군민소득회계를 위한 중간집계자료를 주 자료로 각종잠사류관계 자료를 수집분석 하였으나 자료의 제한성이 컸다. 이와 같은 잠업시책연구를 위하여 과학적표본계산에 입각한 자료수집활동의 강화가 절실히 요청된다. 제한된 자료의 범위내에서 분석된 결과를 요약하면 다음과 같다. 1. 현재의 생산기술체제하에서 제사부문은 대규모 생산의 상대적 유리성이 인정되며 따라서 대규모의 자본집약적 생산체제로 발전될 가능성이 클 것으로 예상된다. 2. 양잠부문에서는 대규모생산의 유리성이 인정되지 않으며 따라서 현재의 소규모 노동집약적 생산체제로 유지될 것이 예상된다. 새로운 기술체제가 도입되지 않는 한 우리나라 농업이 상업적 영농으로 발전됨에 따라 수익성이 높은 여지의 상품생산으로 전환될 가능성도 없지 않다. 3. 잠사류의 가격변동에 따라 생산에 미치는 영향력은 양잠부문이 제사부문보다 크며 따라서 가격인상에 따라 국민총생산에 미치는 영향은 양잠부문이 제사부문보다 클 것이 예상된다. 4. 우리나라 잠업의 균형적 발전을 위한 잠사류의 균형가격수준은 1963∼69년의 추세로 보아 잠견가격을 8∼16%로 조정인상 하던가 또는 기준가격수준을 6∼8%로 인상하는 것이 합리적이었을 것으로 분석되었다. 또한 생사제조판매비와 잠견의 가격비가 28% 대 72%로 책정하는 것이 투입된 자원의 생산력을 일치시키는 균형가격비로 분석되었다.

  • PDF

푸른곰팡이 대치배양에 의한 꽃송이버섯 균사 생장 특성 및 계통간 교잡균주의 rDNA 분석 (Characteristic of mycelial growth of cauliflower mushroom (Sparassis latifolia) using replacement culture with Trichoderma and rDNA analysis in genealogy of crossbreeding strain)

  • 오득실;김현석;김영;위안진;윤병선;박화식;박형호;왕승진
    • 한국버섯학회지
    • /
    • 제12권1호
    • /
    • pp.41-51
    • /
    • 2014
  • ${\beta}$-glucan 함량이 높다고 알려진 꽃송이버섯의 농가재배 활성화를 위하여 푸른곰팡이 내성균주를 선발하고자 푸른곰팡이 대치배양에 의한 꽃송이버섯 균사생장 특성을 확인하였으며, 또한 생장이 우수한 신품종을 개발하고자 교잡육종 균주에 대한 유전 다양성을 분석하였다. 먼저 푸른곰팡이 대치배양에 의한 꽃송이버섯 균사의 생장 특성을 확인한 결과, 6951 (T. viride) 균주에서는 대치선을 형성한 후 별다른 변화를 보이지 않았고, 6952 (T. spp.) 균주에서는 대치선을 형성한 다음 보다 많은 포자를 형성하는 것이 관찰되었다. 그러나 6426 (T. harzianum) 균주에서는 꽃송이버섯 균사가 생장하고 있던 부분까지 모두 덮어버리는 것이 확인되었다. 그 중 특이하게도 구례에서 채집선발한 균주인 JF02-06 균주에서는 다른 균주에 비해 푸른곰팡이 포자가 형성되지 않는 것을 확인되어 다소 푸른곰팡이에 대한 저항성을 갖는 것으로 사료되었다. 전남 산림자원연구소에서 보유 중인 균주 중 생장 및 자실체 발생이 우수한 모균주를 선발하여 교잡을 실시하여 생장특성을 조사한 결과, 미송톱밥배지에서 JF02-47, 49, 50 균주의 균사생장량이 우수한 것으로 확인되었다. 이러한 교잡육종 균주의 유전 다양성을 분석하기 위하여 ITS1, 5.8S와 ITS4 영역에 대한 염기서열을 분석한 결과 Genebank에 등록된 다른 꽃송이버섯 균주와 높은 유의성을 갖는 것으로 확인되었다. 이러한 꽃송이버섯의 포자 및 균사를 현미경으로 관찰하여 생장 특성을 확인한 결과, 포자의 크기는 장경 $6{\mu}m$, 단경 $5{\mu}m$의 물방울 모양으로 확인되었고, 균사에서 3가지 형태의 꺽쇠가 관찰되었다. 균사의 폭은 $3{\mu}m$이며 꽃송이버섯 균사의 특징으로는 약 50% 정도 꺽쇠에서 균사가 뻗어나가는 특성을 갖고 있음이 확인되었다. 균사의 생장 속도는 $0.507{\mu}m/min$이며, 2차 균사는 $0.082{\mu}m/min$의 속도로 생장하다가 모균사와 평행을 이루는 시점에서는 모균사의 생장속도와 유사한 속도로 생장하였다. 꺽쇠발생은 약 5시간 동안 균사 내부 전해질의 이동이 관찰된 후 작은 꺽쇠를 형성하였다. 약 3시간 후 격막이 형성되기 시작하였으며, 그로부터 2시간 후 최종적으로 완성되었다. 이러한 특성을 갖는 꽃송이버섯의 푸른곰팡이 저항성을 확인하고, 교잡균주의 유전 다양성 및 균사의 생장 특성을 확인하여 꽃송이버섯에 대한 기초적인 이해를 높이고, 더 나아가 버섯산업 발전에 이바지하고자 한다.

껍질째 먹는 배 '조이스킨' 육성 (Breeding of 'Joyskin' Pear as fruit for Eating with the Skin)

  • 김윤경;강삼석;조광식;원경호;신일섭;김명수;마경복;이인복
    • 원예과학기술지
    • /
    • 제34권6호
    • /
    • pp.959-965
    • /
    • 2016
  • 껍질째 먹는 배 '조이스킨'은 1994년 국립원예특작과학원 배연구소에서 '황금배'와 '조생적'을 교배하였다. 317개 교배실생 중 식미가 우수하고 껍질을 벗기지 않고 먹을 수 있는 '17-04-53'을 2006년 최초로 선발하고 2006년부터 2011년까지 9개 지역, 10개 장소에서 지역적응 시험을 거친 후, 최종 선발하여 '조이스킨'으로 명명하였다. '조이스킨'은 '황금배'와 마찬가지로 수세가 강하고, 반개장형이다. '조이스킨'의 평균 만개기는 4월 21일로 '황금배'와 유사하며 숙기는 9월 6-8일로 '황금배' 보다 7-8일 이상 빠르고 과형은 원형, 성숙기에는 선황색을 띈다. 평균과중은 320 g 내외, 과육경도는 $2.5kg/8mm{\varphi}$로 '황금배'와 유사하였다. blade type으로 측정한 '조이스킨'의 과피경도는 22.9 N으로 '황금배' 29.9 N과 유의한 차이를 보였다. '만풍배', '신고', '황금배', '조이스킨'의 과피 석세포를 phloroglucinol-HCl로 염색하여 조사한 결과, '조이스킨'은 석세포의 크기가 작고 개수도 적은 경향을 보였다. '조이스킨'은 2012년 4월 19일에 국립종자원에 2012-311로 품종보호를 출원하였으며, 2016년 2월 품종등록(grant number, 5895) 되었다.

Wearable Computers

  • Cho, Gil-Soo;Barfield, Woodrow;Baird, Kevin
    • 섬유기술과 산업
    • /
    • 제2권4호
    • /
    • pp.490-508
    • /
    • 1998
  • One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

  • PDF

A Study on the Australian Law Regarding RPAS (Remotely Piloted Aircraft System): Need for an International Approach

  • Wheeler, Joseph;Lee, Jae-Woon
    • 항공우주정책ㆍ법학회지
    • /
    • 제30권2호
    • /
    • pp.311-336
    • /
    • 2015
  • 본 논문은 무인항공기 관련 현행 국제법을 국제항공공법과 국제항공사법의 관점에서 조사하고, 무인항공기관련 현행 호주 국내법과 입법 예고된 호주 국내법을 무인항공기 운항에 따른 위험요소 (민사책임, 안전, 사생활보호)에 중점을 두면서 검토한다. 현재 전체 상업용 비행에서 무인항공기 운항이 차지하는 비율은 미미한 수준이지만, 상업용 목적의 국제무인항공비행은 현실이 될 것이다. 무인기 관련산업이 빠르게 발전하고 있으므로, 빠른 시일 내에 정책적인 해결방안이 연구되어야만, 무인항공기관련 위험요소들이 실제로 일어났을 때 적절하게 대응할 수 있는 법규범이 만들어 질 수 있을 것이다. 호주의 무인항공기관련 성공적인 국내입법에서 보듯이, 국내법적 또는 지역단위의 접근이 무인항공기 관련 문제를 주도하고 있고, 계속해서 주도할 것이다. 안전문제는 호주의 현행 입법 예고된 무인항공기관련 법규에 가장 중요한 요소이고, 국제적으로도 마찬가지이다. 안전관련 법규를 만드는 것은 매우 중요하고, 민사책임 관련법규를 만드는 것보다 선행되어야 한다. 그 이유는 안전관련 법규를 만드는 것이 민사책임 법규가 적용되는 사고의 발생위험 자체를 줄일 수 있기 때문이다. 무인항공기 운항자에 대한 구속력 있는 감항기준이 구비되어 있지 않다는 점은, 운항자의 엄격책임이 적용되는 민사책임 체계가 무인항공기 분야에는 적절하지 않다는 주장을 가능하게 할 수 있다. 이에 대한 해결책으로 ICAO 지침개정과 무인기 안전 및 감항관련 SARPs 개정, 또한 잠재적으로는 민사책임 (참가자, 승객, 지상손해 대상)관련 문제들을 포함하는 SARPs 개정의 필요성을 제안한다. 이러한 ICAO지침은 적절한 절차를 거쳐서 각국의 국내법으로 차용될 수 있을 것이고, 이럴 경우 국제협약을 제정하고 발효까지 필요한 행정적 부담과 시간을 피할 수 있을 것이다.

기후변화 대응을 위한 발전소 온배수 활용 양식업 경제성 분석 (A Study on Comparative Analysis of Socio-economic Impact Assessment Methods on Climate Change and Necessity of Application for Water Management)

  • 이상신;김상문;엄기증
    • 한국재난관리표준학회지
    • /
    • 제4권2호
    • /
    • pp.73-78
    • /
    • 2011
  • 갈수록 심해지고 있는 전 세계적인 기후변화 문제를 해결하고 탄소배출 규제 강화에 선제적으로 대응하기 위해 정부는 2010년 '저탄소 녹색성장 기본법'을 제정하고 녹색기술과 녹색산업을 국가 신성장 동력으로 삼고 있다. 이에따라 산업시스템 전반에 걸쳐 미활용되는 폐열 사용에 대한 필요성이 부각되고 있으며, 발전소를 비롯한 대규모 산업단지에서 발생하는 폐열 및 온배수를 활용하여 열대작물재배, 넙치 등 농어업분야 재활용에 대한 연구와 적용이 활발히 진행되고 있다. 본 연구에서는 발전소 온배수 형태로 버려지는 폐열을 활용한 국내외 활용사례를 살펴보고 강원도 영월 LNG복합발전소의 온배수를 활용한 철갑상어 양식에 대한 경제성 평가를 실시하였다. 경제성 분석에서는 투자 리스크와 재정부담을 최소화하기 위해서 규모를 작게 시작해서 점진적으로 확대하는 3단계에 걸친 시범사업계획의 경제성을 분석하였다. 사업운영기간은 10년(2012~2021)으로 가정하고 현지조사로 확보한 기초통계량에 근거하여 단계별 외부 차입금 규모를 80%와 40%로 구분함으로써, 차입금 규모에 따른 운영 기간 내(10년) NPV(순 현재가) 및 경제성(B/C)을 추정하였다. 분석결과 외부차입금이 총 투자금액의 80%를 차지하는 경우에는 B/C가 1.79인데 반해 차입규모가 40%인 경우에는 1.81로 향상되는 것으로 추정되어 외부차입금 규모를 축소하는 것이 보다 큰 경제성을 확보하는데 중요한 요인이 됨을 알 수 있다. 본 연구결과로 발전소 폐열을 활용한 철갑상어 양식의 경제성 확보가 가능한 것으로 나타남에 따라 이를 통한 고부가가치 지역발전 사업 아이템 도출이 가능할 것이며, 더불어 지자체의 기후변화대응 역량강화에도 크게 기여할 것으로 사료된다.

  • PDF

소규모 사업장 보건관리대행기관의 간호업무 운영관리 지원체계 (Management and Supporting System on the Occupational Health Nursing Services Provided in Group Occupational Health Agencies of Korea)

  • 유경혜
    • 한국직업건강간호학회지
    • /
    • 제8권2호
    • /
    • pp.193-211
    • /
    • 1999
  • This study was carried out to investigate the management and support system affecting to the occupational health nursing services(OHNS) provided in group occupational health agencies(GOHA). Questionnaire was developed and distributed to 82 nurses who were working in GOHA and who agreed to participate in the survey. The results were as follow: 1. OH nurses responded were mostly in the age of twenty to thirties(89%), married(73.7%), technical college graduates(88.9%), worked in hospital(85.4%) and participated more than 1 year in group occupational health services (96.3%). 2. Fifty eight point four percent of the OH nurses worked in number of workplace more than 30 to less than 60 in the OHNS form. The figure of workplaces undertaken by nurses was ranged greatly from 9 to more than 100. Number of employees who cared by nurses were mostly under 5,000 peoples in 93.3%. The types of industry was mostly manufacturing and located in the order of factory complex area, suburban, urban and others. 3. Most OH nurses(87.8%) were fully involved in the OHNS for the SSE. Their working days to visit SSE was 5 days per week(77.8%) and one day in the GOHA at 41.3%. 4. The OH documents using by nurses were found in more than 23 different types. However, they were largely summarized in the types of 'Workplace Health Management Card', 'Personal Health Counselling Card', 'Daily Health Management Report', 'Visiting List of Workplace' and 'Sick Employee List'. 5. The items of laboratory test provided by GOHA were mostly achieved in the purpose of basic health examination. They were used to be the blood pressure check(98.8%), blood sugar test (98.8%), urine sugar and protein(91.4%), SGOT and SGPT(85.3% each), cholesterol (82.9%), hepa vaccine immunization(82.9%), r-GPT(81.7%), hemoglobin(79.3%) and triglyceride(75.5%). 6. The OH nurses(92.7%) followed the work pattern to visit the GOHA before and after small-scale enterprises(SSE) visit by car driven by nurses in 74.3%. They were payed by GOHA for transportation fees in certain amounts. However, nurse is the main person(75.0%) who covers up in case of traffic accident. If the GOHA has no transportation regulation for the formal workplace visit, data showed that nurses had been responsible to take charge(31.7%). 7. The personnel manager who takes in charge for nursing services was 'nurse' in 61.7% and 41.2% worked as the final decision maker related to nursing work. The OH nurses' opinions about factors affecting to the management were classified in the four areas such as 'Nature(Quality) of health professional'. 'Content of OHNS', 'Delivery system of the GOHS', and 'Others'. The factors were indicated highly in 'Authority as health professional', 'Level of perception of director on the OH' and 'Physical work condition for OHNS'. The things that this study suggests in the recommendation would be summarized in such as the management and supporting system working for SSE in the OHNS is necessary to reform thoroughly. The reconsidered aspects might be in the matters of number of workplaces undertaken by nurses, development of effectively practical health documents, preparation for guideline of the laboratory test in the workpleces, establishment of convenient and encouraging support system and cooperation between other health professionals with respect and skill.

  • PDF

首都圈地域 小賣業 經營의 空間的 變容 (Spatial Changes in the Business Organization of Retailing in the Seoul Metropolitan Area)

  • 한주성
    • 대한지리학회지
    • /
    • 제31권1호
    • /
    • pp.19-37
    • /
    • 1996
  • 대도시권내 소매업의 지역구조 변화를 이해하기 위하여 우리나라에서 소매업의 규모가 가장 큰 수도권지역 소매업 경영의 지역적 변화형태를 고찰한 결과 다음과 같은 점이 밝혀졌다. 1979~1991년 사이에 연간판매액에 의한 소매업의 업종구성 변화는 <종합 소매업>과 <개인 운수장비 소매업 및 주유소 운영업>의 구성비가 매우 높아졌다. 그리고 소매업의 경영상의 변화는 개인 경영조직이 탁월해지고, 종사자의 常傭化가 많이 나타났다. 주성분 분석에 의한 수도권지역 소매업의 주된 경영성분은 1. 소매업의 대규모화와, 2. <섬유, 의복, 신발 및 의복 악세사리 소매업>, <가구, 철물 및 가정용품 소매업(가전제품 포함)>, <장신구 및 시계 소매업>의 법인 조직화와 상용 조사자의 고용화이다. 소매업 경영의 유형변화를 보면, 1979년에는 섬유, 의복, 신박 및 의복 악세사리 소매업, 가구, 철물 및 가정용품 소매업(가전제품 포함), 장신구 및 시계 소매업의 법인 조직화와 상용 종사자의 고용화, 달리 분류되지 않은 일반 소매업의 대규모 소매업의 법인 조직화가 다소 이루어졌으나, 1991년에는 소매업의 대규모화가 이루어진 것이다. 이러한 경영변화를 나타내는 지구는 서울시와 그 위성도시 및 경기도의 남동부지역이다. 또 1979년에 섬유, 의복, 신발 및 의복 악세사리 소매업, 장신구 및 시계 소매업, 달리 분류되지 않은 일반 소매업의 대규모 소매업의 법인 조직화가 다소 이루어진 것에서, 1991년에는 개인 운수장비 소매업 및 주유소 운영업의 상용 종사자의 고용화가 이루어졌다. 이러한 변화를 나타내는 지구는 경기도의 동부와 북부지역이다. 따라서 우리나라 수도권지역 소매업 경영의 변화형태는 1979년에 일부 소매업이 법인 조직화와 상용 종사자의 고용화가, 1991년에는 소매업의 대규모화와 개인 운수장비 소매업과 주유소 운영업의 종사자 고용화가 나타난 점이다.

  • PDF

마늘의 저온저장 후 2차 건조가 품질에 미치는 영향 (Secondary Drying Effects on Garlic Quality after Low Temperature Storage)

  • 녕효봉;강태환;박종원;한충수
    • 한국식품영양과학회지
    • /
    • 제42권9호
    • /
    • pp.1452-1460
    • /
    • 2013
  • 마늘은 일반적으로 $0{\sim}-4^{\circ}C$의 저온에서 저장하는 방법이 널리 이용되고 있으며, 저온저장 후 상온보관 시 마늘은 휴면이 일직 타파되고 생육이 촉진되어 품질이 떨어지게 된다. 그리고 저장온도가 낮고 상온과의 온도 차이로 마늘의 표면에 결로가 생기며, 이 결로로 인해 발생된 수분이 마늘의 미생물 생장을 촉진시켜 부패율 증가에 큰 원인이 되고 있다. 그러나 이러한 문제점에도 불구하고 저온저장 후 상온유통 시 후처리에 대한 연구가 매우 미진한 상태이다. 따라서 본 연구에서는 마늘의 저온저장 후 건조처리 방법에 따라 상온 보관성 향상 및 품질에 미치는 영향을 분석하고, 적정저장 및 2차 건조조건을 확립 제시하였다. 연구 결과를 요약하면 다음과 같다. 마늘의 중량감소율은 2차 건조조건에 따라 $40^{\circ}C$ 2일 건조조건에서 2.5~4.1%로 가장 크게 나타났다. 그러나 2차 건조 후 상온보관에 따른 마늘의 중량감소율은 $40^{\circ}C$ 2일 건조조건에서 5% 낮은 것으로 나타났다. 2차 건조 후 상온보관 기간에 따른 마늘의 맹아율은 상온보관 15일까지 20% 급속히 증가하는 것으로 나타났으며, 30일 이후부터는 소폭 증가하는 것으로 나타났다. 2차 건조조건에 따른 마늘의 맹아율은 건조하지 않은 조건에서 그 증가폭이 10% 정도 큰 것으로 나타났으며, 2차 건조조건 중 $35^{\circ}C$ 3일과 $40^{\circ}C$ 2일 건조조건에서의 맹아 생장이 가장 작은 것으로 나타났다. 저온저장 후 2차 건조조건에 따른 마늘의 부패율 변화는 저온저장 후 2차 건조하지 않은 조건에서 부패율이 5~10% 높았으며, $40^{\circ}C$ 2일 건조조건에서의 부패율이 가장 낮은 것으로 나타났다. 저온저장 후 상온보관에 따른 마늘의 경도변화는 저온저장 후 2차 건조를 수행하지 않은 조건에서 그 변화 폭이 20~50 gf 크게 나타났고, 2차 건조 후 상온보관에 따른 마늘의 경도 감소는 $35^{\circ}C$ 2일과 $40^{\circ}C$ 2일 건조조건에서 작은 것으로 나타났다. 따라서 마늘의 저온저장 후 상온보관 시 적정조건은 저온저장 직후 2차 건조를 하며, 2차 건조조건 중 $40^{\circ}C$ 2일 동안 건조하는 것이 마늘의 고품질 유지를 위해 바람직한 것으로 판단된다.

남부지역에서 주요 콩 품종의 파종기에 따른 생태적특성 및 수량 변이 (Ecological Characteristics and Yield of Major Soybean Cultivars at Different Sowing Times in Southern Korea)

  • 김동관;최진경;박흥규;신해룡;윤성탁;이경동;임요섭
    • 한국작물학회지
    • /
    • 제58권1호
    • /
    • pp.57-66
    • /
    • 2013
  • 본 연구는 남부지역에서 주요 콩 품종의 파종기 이동이 생태반응과 생육 및 수량성 등에 미치는 영향을 구명하고자 전남 나주(위도 $35^{\circ}$ 04'N, 경도 $126^{\circ}$ 54'E)에서 2008년부터 2010년까지 3개년간 수행되었다. 여름형콩 품종인 새올콩과 다원콩, 가을형콩 품종인 태광콩, 풍산나물콩 및 청자3호를 이용하여 5월 15일, 5월 30일, 6월 15일, 6월 30일, 7월 15일에 파종하였다. 1. 여름형콩 품종 중에서 새올콩은 다원콩에 비해 파종기 지연에 따른 개화일수와 등숙일수 및 생육일수의 짧아지는 정도가 적었다. 2. 가을형콩 품종 중에서 태광콩의 생식생장기 일장반응은 풍산나물콩이나 청자3호보다 낮은 편이었다. 반면에 풍산나물콩과 청자3호의 영양생장기와 생식생장기 일장반응은 기타 시험품종보다 높았고, 그 경향은 풍산나물콩이 더 컷다. 3. 경장, 주경절수 및 주경두께는 대부분 시험품종에서 늦게 파종할수록 감소하는 경향이었으나, 새올콩의 경장과 주경절수는 유의차가 없었다. 4. 여름형콩 품종인 새올콩과 다원콩의 제1착협절위와 모든 시험품종의 절간장은 파종기를 달리하여도 유의차가 없었다. 5. 개체당 협수는 새올콩을 제외한 모든 시험품종에서 파종기가 지연됨에 따라 감소하는 경향이었는데, 소립종인 다원콩과 풍산나물콩에서 변이가 크고, 특히 가을형콩 품종인 풍산나물콩이 더 컷다. 6. 수량은 다원콩과 태광콩 및 풍산나물콩 5월 30일 파종, 청자3호 5월 30일과 6월 15일 파종에서 가장 많았다. 새올콩의 수량은 5월 30일부터 7월 15일 파종기간 유의차가 없고 5월 15일 파종에서 가장 낮았다.