• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.119-120
• /
• 2021

Radio equipment for maritime service and navigation aids installed on fishing vessels are required to comply with the performance standards KN60945_60533 that apply IEC 60945. The LTE-M transceiver was excluded from the target because it did not belong to the radio equipment of the ship station, and it acted as a cause of audible noise in the radio equipment for maritime service installed in the fishing vessel due to interference by radiated emission or conducted emission. In this paper, we analyze the impact of interference based on related cases and present institutional solutions for the diversification of LTE-M.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.4
• /
• pp.379-388
• /
• 2007

Ever increasing fuel prices and environmental concerns are forcing commercial vessel operators and designers to re-assess current vessel designs with an emphasis on their propulsion systems. The most important parameter determining propulsive efficiency is the diameter of propeller. Many investigations have been carried out to adapt a large and slow turning propeller known as one of the most robust and effective way of achieving high efficiency in ship propulsion system. However, for the same vessel a further increase of propeller diameter would require the modification of the aft end while still paying attention to the hull clearance to prevent excessive propeller excited vibrations. In order to take the advantage of this approach small workboats (e.g. tug boats, fishing vessels etc.) operate in service with a significant increase of aft draught and hence resulting "inclined keel" configuration can be observed. Although it is not unusual to see large vessels sometimes to operate with stern trim to improve their operational performance and fuel efficiency, it is rare to see a such vessel purposely built with an inclined keel feature to fit a large diameter propeller for power saving. This paper investigates the application of the inclined keel configuration to a 3600TEU container vessel with the aim of fitting an 11 % larger diameter propeller (and hence resulting 17.5 % lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.4
• /
• pp.204-217
• /
• 2018

This study proposes a cost-effective method to monitor coastal environments using e-Navigation-implemented domestic and international ferries, and to analyze big data of records such as wind, temperature, salinity, waves, and currents that are gathered through e-Navigation system. First, we present the concept and architecture of e-Navigation operation system based on the General Information Center on Maritime Safety and Security. Then, the marine observation system that can be applied to ferries operating in our nation's territory is discussed. Analytical methods, such as spatio-temporal mixed effects model, ensemble method, and meshfree method, in handling real-time big data obtained by the e-Navigation observing system are then explained in detail. This study will support the implementation of the Korean e-Navigation project that focuses on the safety of small vessels such as coasters and fishing vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2021

The International Maritime Organization (IMO) is promoting the introduction of e-Navigation that prevents maritime accidents by fusion of Information & Communication Technology (ICT) with ship operation technology. In Korea, Korean e-Navigation is also being developed for fishing vessels and small vessels sailing offshore, which are vulnerable to maritime accidents. However, for the successful development of Korean e-Navigation, it is necessary to develop an indicator that can evaluate the development performance so that the development performance that has been progressed so far can be evaluated and the development direction can be re-established. Therefore, this study attempted to develop an evaluation index tailored to the development goal of e-Navigation service centering on the collision accident, which is a major maritime accident. In this study, a collision accident evaluation index for e-Navigation service was developed by deriving and quantifying the root cause of maritime collision accidents using Root cause analysis(RCA) and fault tree analysis (FTA) techniques. This indicator is considered to be helpful in reducing maritime accidents as it is used as a development indicator for e-Navigation and an indicator for maritime collision accident analysis.

• Journal of the Korean Institute of Navigation
• /
• v.1 no.1
• /
• pp.17-26
• /
• 1977

A large number of the set-nets are set in Namhaedo coast of Korea. The floats of these set-nets are not only small even in case of large floats but also they scarcely have distinguishable marks such as light buoys or flags, so that they are very hard to be recognized by naked eyes and thus became probable obstacles to navigation for the passing ships and the fishing vessels. In order to research the capability of detecting such nets with Radar, the author investigated a maximum detectable range of the ordinarly large floatsand of a floating corner reflectors of various size and shape by Radar. The results obtained are as follows; 1. A maximum detectable range of large floats at a close range can be calculated by the Radar equation in sufficient accuracy. 2. Large floats of the large set-nets are also detectable by Radar even though it's detectable range boundary was within 0.2-0.65 miles. And the Radar picture of large floats was easier to be found with somewhat higher setting of the gain control on shorter range scale of the 1 mile. 3. Floating corner reflector rather suitable for set-net floats of "S" type reflector proposed in this paper, of which the dimension must be above 17cm in diameter to be detectable by Radar at 2 miles.t 2 miles.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.100-101
• /
• 2012

According to growing the leisure boat market, safety-related and weather information have been required by different users with different electronic devices. NAVTEX messages transmitting worldwide from local stations are a kind of useful service, even for non mandatory carriage requirement vessel, such as small or fishing vessels. However, it is not easy for all users to recognize intuitively. This paper is to implement the NAVTEX message on tablet PC, indicating warning positions of message on Android-based google map.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.8-14
• /
• 2020

According to the statistics provided by Korean Maritime Safety Tribunal for the year 2018, the majority of marine accidents in the past four years have occurred in fishing boats and small-sized boats. Negligent behavior resulting from not looking outside and non-compliance with navigation laws are the primary reasons behind ship collisions. Although safety education and training are reinforced to prevent such accidents, they still occur frequently. Hence, technical methods are continuously being developed to reduce ship collisions caused by human cause. The objective of this study is to reduce ship collisions by employing the WAVE communication system, which has short transmitting and receiving periods that can be incorporated for high-speed small-sized vessels. In this study, the suitability of the communication range was examined, and the appropriate range and timing for avoidance motion were accordingly selected, and a control algorithm based on the same was thereby designed. Consequently normal operation of the collision avoidance system was verified by connecting and simulating the proposed WAVE communication router-controller-steering equipment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.411-418
• /
• 2017

In the domestic case, although technological capabilities are recognized globally in the IT field, it is actually that the technical capabilities of the domestic leisure ship market which is formed mainly by fishing vessels are not beyond their technical capabilities At the point where the GNP of our country already goes over 22,000 dollars, the demand for the products related to the middle and small leisure boats is gradually increasing, but most of the high added value products depend on the imports from U.S.A. and Europe. And in case of the cars, with the Car Navigation as the start, products which satisfies various demands of the users are coming out in large quantity and now the IT technology is the necessity which can not be lived without in the car industry. Thus, if the digital ship navigator which jointed the recent ICT technology which was applied to the land for the domestic middle and small leisure ships by utilizing the embedded hardware technology and mapping technology which are credible is developed and distributed, it will become not only the opportunity to improve the industry related to middle and small ship IT, but also, the export about overseas market can be expected.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.3
• /
• pp.223-234
• /
• 1996

Distribution of Anchovy was analyzed from the experimental operations by the small anchovy drag net fishery in the coastal area of Yang yang - gun and Myongju - gun of Kangwon Province from October to December, 1994. Temperature ranged from $11.4^{\circ}C.$to $17.4^{\circ}C.$throughout the experimental period. Fishes caught by experimental operation vessels were composed of anchovy, Clupanodon Punctatus, Pleuronectidae, Tetraodantidae, Acanthopagrus Schlegeli etc., and the anchovy occupied more than 99.6% of the total catch. Anchovy was characterized by the most abundance of the catch for the individual less than 6cm and the gradual increase after October for those larger than 6cm. CPUE(catch per tow) of anchovy was 684kg in October, 784kg in November, 1,590kg in December and mean CPUE of 3 months from October to December was 1,066kg. Fishing grounds of anchovy were formed in coastal area, from $37^{\circ}$45'N to $38^{\circ}$04'N, off Kangwon Province. Distribution density of anchovy in Chumunjin - up, Kyohang - ri Sachon - myon, and Sachonjin - ri coasts was higher than the other areas. Anchovy caught in this surveyed area was recruited from July to September at the length class between 2cm and 3cm, and grew to the sizes between 4cm and Bem in October, between 5cm and tcm in November, between tcm and Bem in December. Recruitment of anchovy increased from July to September and suddenly decreased after September. Individual number of the population was the largest during the period from August to October and gradually decreased after October. Biomass continuously increased after August, and was the largest in December.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.810-817
• /
• 2018

In Korea, tuna purse seine fishery is the industry with the highest production volume in domestic deep-sea fishery. Research has been continuously carried out since the late 1980s, and research on modernization of technology has been actively conducted. However, while auxiliary works boats on the fishing vessels play an important role in the purse seine fishing, related research is not sufficient. In this study, we tried to rebuild the propulsion system of the Net-boat from the propeller to the waterjet type and to perform the hull form conversion to improve the resistance performance of the hull part and improve the motion performance. For this, we calculated the change of the fluid performance of the ship through computational numerical analysis. In addition, towing tank tests were carried out to verify the performance of the existing ship and the ship which changed the propulsion system. As a result, resistance performance of the waterjet type compared to the propeller type was improved by approximately 45 %. It was confirmed that this was due to reduction of the wetted surface area by removing net and improvements in hull form.