• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.337-344
• /
• 2004

A real-time surveillance system of the inshore fishing ground was constructed to identify and detect discrete targets, such as illegal fishing vessels. This paper describes measurements made with a combination of sensors, such as radar, CCTV camera, and GPS receivers, for monitoring the fishing activity of small vessels within the fishing limit zones of the inshore waters. The CCTV camera system was used to confirm detection and to classify the type of target. The location of legal vessels distributed in coastal waters was acquired from each GPS system of ships connected to commercial satellite communication network. The surveillance system was networked via LAN to one host PC with the use of electronic navigational charts (ENC) and a radar link. Radar Target Extractor (RTX) for radar signal processing can be remotely accessed and controlled on existing PC via the internet, from anywhere, at any time. Results are presented that demonstrate the effectiveness of the newly constructed fisheries monitoring system for conducting continuous surveillance of illegal fishing vessels in the inshore fishing ground. The identification of illegal fishing vessels was achieved by comparing radar positions of illegal fishing vessels exceeding the warning limits in the surveillance area with GPS position reports transmitted from legal fishing vessels, and the illegal fishing vessels were marked with red symbols on the ENC screen of a PC. The methods to track the activities of all vessels intruding or leaving the fishing limit zones also were discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2019

In December 2017, many collision accidents of small vessels, such as those between oil refineries and fishing boats, occurred near Yeonghung-do in Incheon. In order to prevent marine casualties from small vessels, the government is striving to improve the safety capabilities of ship operators by strengthening education and improving the working environment. They are providing education and refining training regulations for fishermen operating vessels under 5 tons. However, the situation includes certain vulnerabilities. In this study, we propose a collision prevention algorithm for small vessels using the Wireless Access in Vehicular Environments (WAVE) communication system, which is a new communication technique to prevent collisions with small ships. The collision avoidance algorithm used is based on DCPA/TCPA. Research analyses, simulation experiments and questionnaires have been conducted to define the criteria of DCPA/TCPA. As a result, the standard for DCPA was $8(L_a+L_b)$ and for TCPA was 2.5 min. Three different accident cases were selected, and this algorithm was applied to confirm alarm responses at certain times. This algorithm can provide information to the operators of small ships in advance to help them recognize potential collision situations.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.561-565
• /
• 2014

This paper is mainly concerned with the interaction effects between two vessels and sidewall with a mound. Experimental study on hydrodynamic forces between ship and sidewall with a mound was already shown in the previous paper, measured by varying the distances between ship and sidewall. The ship maneuvering simulation was conducted to find out the minimum safe distance between vessels, which is needed to avoid sea accident in confined waters. From the inspection of this investigation, it indicates the following result. When and if one vessel passes the other vessel through the proximity of sidewall with a mound, the spacing between two vessels is needed for the velocity ratio of 1.2, compared to the case of 1.5. Also, for the case of ship-size estimation, the ship maneuvering motion is more affected by interaction effects for the overtaken small vessel, compared to the overtaking large vessel.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.11-29
• /
• 1986

As per the expanding needs of marine exploitation, many floating structures have been built. Among these, box-type vessel is considered as the most basic shape, to which plant barges and crane barges belong. Stability problem is very important for vessel. In order to increase transverse stability, this paper employs bulwarks along the upper deck sides of box-type vessels and the emphasis is laid upon the effect of bulwarks on transverse stability. In the present paper, the calculation method of heeling moment acting to the ship due to hydrostatic pressure is suggested, and actual procedures of the calculation for box-type vessels with bulwarks are shown. Furthermore corresponding model tests are carried out in small water tank. Through the comparison between calculated and measured values, it is confirmed that the preset calculation method is useful. And employing bulwarks on box-type vessels is very effective for increase of transverse stability at the heeling angles from about 15 degrees to about degrees.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.390-397
• /
• 2012

According to sailing condition, an exciting force for luminairie of naval vessels was measured and analyzed. A naval combat service support boat and P${\bigcirc}{\bigcirc}$(patrol killer guided missile) were selected as a target naval vessel. Due to their small size and fast speed, they received excessive vibration than other bigger naval vessels like destroyer. The vibration of luminairie was measured on their cruising and maximum speed. This could analyze exciting force for luminairie of naval vessels. Using this analyzed data, the validity of military standard for naval vessel was verified.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.22-30
• /
• 2020

In March 2016, a 6.67-ton fishing boat capsized owing to the loss of stability during crane operations. Capsizing occurs when a boat or ship is flipped over (or turned upside down) for reason other than accidents caused by collisions, contact, stranding, fire or explosion. Over the past nine years (2010-2018), capsize accidents have accounted for 2.34 % of all marine accidents and are gradually increasing. The loss of stability from improper shipping is the main cause of most capsizes, especially for small fishing vessels weighing 10 tons. According to the Fishing Vessel Act, small fishing vessels weighing less than a ton are exempted from inspections on stability and load cranes. This study analyzes the issue cited as the reason for the capsizing of the small fishing boat in Goseong, namely, the reduction of restoring moment due to increased weight of the crane. Fishing boats with similar loading conditions were modeled on the basis of re-determination, and their stability before and after the accident was assumed. The fishing boats with heavier cranes were found to be at higher risk of capsizing owing to the reduction of the restoring moment and the angle of deck immersion. Under standard loading conditions, the stability moments of fishing vessels are lesser during fishing, compared to when they depart from or arrive at the port.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.415-420
• /
• 2018

The Energy Efficiency Design Index (EEDI) introduced by the Marine Environment P rotection Committee(MEPC) in International Maritime Organization(IMO) has significantly assisted in regulating CO2 emissions. However, in adverse weather conditions, it can lead to accidents due to slow steaming of vessels and low engine propulsion power. In response to this issue, the MEPC presented guidelines for the minimum propulsion power of the main engine for maintaining the course of vessels in adverse weather conditions. However, the guidelines are only applicable for vessels with a deadweight of 20,000 tons, leaving out small and medium ships. This study evaluated vessels subject to the guidelines of minimum propulsion power and proposed revised guidelines. In addition, relevant cases of marine accidents were investigated with the aim of investigating the minimum propulsion power of main engine for medium and small ships not covered by the guidelines. In order to achieve this, engine propulsion power was analyzed according to the size of the affected vessels. The results obtained from this study could be used as a minimum power criterion that can be considered for ship building to reduce marine accidents in adverse weather for small and medium ships.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.12-24
• /
• 2000

The electro-hydraulic servo winch system built in a automatic tension control equipment was designed with a latent need for an advanced system in fishing operations of the inshore and coastal fishing vessels. In order to keep the constant tension condition of warp under loading, a tension control circuit was added to the servo winch system.The dynamic performance in the open loop behaviour of the designed winch system was investigated and its applicability was tested for various possibilities of load using a load generator especially developed in order to this study.The mechanical characteristics of this system is different from that of a conventional type, that is, the tension, length, line speed and drum revolution can be automatically controlled by the information from various sensors, such as torque, rpm and pressure transducers. from the experiment results, it was verified that the servo winch system has very good output and tracking behaviour for the control input signals in different operating conditions though overshoot of out 8% in the transient characteristics of torque under the load though a overshoot of about 8% in the transient characteristics of torque under the load condition can be observed when the opening of servo valve, adjustable by the input voltage between - 10 V up to 10 V, changed suddenly.Consequently, the improved fishing winch system can be effectively used as the automatic shooting and hauling equipment of low cost for small inshore and coastal fishing vessels which engage in net fishing.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.53-58
• /
• 2005

An international study on Class B AIS for Non-SOLAS vessels is in progress through IMO and IEC. The IEC issued CDV(Committee Draft for Vote) on March 3, 2005, as IEC 62287, which includes operational and performance requirements, methods of test and required test results about Class B AIS. In this paper, we proposed the method of making Class B AIS properly onboard. This research deals with the problems of introducing Class B AIS which is properly applicable on small fishing vessels as well as domestic Non-SOLAS vessels. Moreover, several technical considerations were suggested to develop a national technical standards for Class B AIS.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1734-1744
• /
• 2015

Majority of marine accidents that occur on fishing vessels are engine accidents. This comprises more than 26 % of the total annual fishing vessel marine accident cases. Large numbers of engine accidents happen in the cooling water system, which are mostly caused by negligence on regular check-up and repair. Notably, small-sized ships have higher engine accidents occurrence rate compared to medium-and large-sized ships. Based on the Report of the Korea Ship Safety Technology Authority, engine accident cases reached 3,032 out of the total 3,081 cases. This study researches on the differences between the small-sized ship pilot, an operator of a vessel engine of less than 200 tons, and a 6th level marine engineer, in terms of the relationship between management forms and what causes the marine accidents in association with the cooling water system. It also studies and analyzes the differences in frequency of the accident occurrence between the two groups. ${\chi}^2$ qualification was imposed through the SPSS statistical analysis program and it got qualified at the significance level of 5%. The research shall be utilized as one of the base line data for the reduction of marine accidents.