• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.8
• /
• pp.843-850
• /
• 2011

In this paper, an effective path generation algorithm for obstacle avoidance producing small amount of steering action as possible is proposed. The proposed path generation algorithm can reduce unnecessary steering because of the small lateral changes in generated waypoints when UGV (Unmanned Ground Vehicle) encounters obstacles during its waypoint navigation. To verify this, the proposed algorithm and $A^*$ algorithm are analyzed through the simulation. The proposed algorithm shows good performance in terms of lateral changes in the generated waypoint, steering changes of the vehicle while driving and execution speed of the algorithm. Especially, due to the fast execution speed of the algorithm, the obstacles that encounter suddenly in front of the vehicle within short range can be avoided. This algorithm consider the waypoint navigation only. Therefore, in certain situations, the algorithm may generate the wrong path. In this case, a general path generation algorithm like $A^*$ is used instead. However, these special cases happen very rare during the vehicle waypoint navigation, so the proposed algorithm can be applied to most of the waypoint navigation for the unmanned ground vehicle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.95-100
• /
• 2013

Localization is very important for the autonomous navigation of Unmanned Ground Vehicles; however, it is difficult that they have a precise Inertial Navigation System(INS) sensor, especially Small Unmanned Ground Vehicle(SUGV). Moreover, there are some condition such as denial of global position system(GPS), GPS/INS integrated system is not robust. This paper proposes the estimation algorithm with optical flow sensor and INS. Being compared with previous researches, the proposed algorithm is suitable for skid steering vehicles. We revised the measurement model of previous research for the accuracy of side direction position. Experimental results were performed to verify the algorithm, and the result showed an excellent performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.133-139
• /
• 2007

An unmanned ground vehicle can perform its mission automatically without human control in unknown environment. To move up to a destination in various surrounding situation, navigational information is indispensible. In order to be adopted for an unmanned vehicle, the navigation box is small, light weight and low power consumption. This paper suggests navigation system using a low grade MEMS IMU for supplying position, velocity, and attitude of an unmanned ground vehicle. This system consists of low cost and light weight MEMS sensors and a GPS receiver to meet unmanned vehicle requirements. The sensors are basically integrated by loosely coupled method using Kalman filter and internal algorithms are divided into initial alignment, sensor error compensation, and complex navigation algorithm. The performance of the designed navigation system has been analyzed by real time field test and compared to commercial tactical grade GPS/INS system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.948-956
• /
• 2011

In this paper, mechanism design of the explosive ordnance disposal(EOD) manipulator for small unmanned ground vehicle(SUGV) is presented from the conceptual to detailed design. EOD manipulator has been widely developed in the world due to the growing threat of the improvised explosive devices at war. It has distinctive characteristics, such as small size and high loading performance, compared to the industrial manipulator which is fixed on the floor. Design of new EOD manipulator must take into account various functional requirements and constraints simultaneously. We focused on developing the EOD manipulator that has suitable size for the SUGV and maximum 15kg payload capacity. Design approach taken in this paper is based on axiomatic design procedure and comparison among many possible candidates of each joint structure to obtain appropriate entire structure of EOD manipulator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.800-806
• /
• 2012

This paper proposes design and development of the Integrated Ground Support System (IGSS) for the flight test of the Unmanned Aerial Vehicle (UAV), which combines ground support and ground control. The integrated flight test of the UAV is a necessary procedure to validate the functionality of the Unmanned Aerial System (UAS). In order to execute cost-effective and systematic flight tests, the IGSS is regarded as an inevitable infrastructure of UAS for small laboratories. The proposed IGSS has functions of ground control, radio communication, power generation, transportation and the maintenance of the UAV.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.127-133
• /
• 2004

This paper described development of the portable ground control system(PGCS) for unmanned aerial vehicle. In the design of GCS, it upload mission planning that aircraft has to perform and has to receive position, attitude, state, navigation information all about the aircraft. Aircraft states and trajectory are displayed using this system on line. The PGCS is composed of commercial notebook computer, RF modem for communication between aircraft and PGCS, input/output board, remote control receiver, switches and lamps. Performance of this system is verified by flight test of small unmanned aerial vehicle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.721-728
• /
• 2012

The tracked SUGVs(Small Unmanned Ground Vehicles) are frequently operated in the narrow slope such as stairs and trails. But due to the nature of the tracked vehicle which is steered using friction between the track and the ground and the limited field of view of driving cameras mounted on the lower position, it is not easy for SUGVs to trace narrow slopes. To properly trace inclined narrows, it is very important for SUGVs to keep it's heading direction to the slope. As a matter of factor, no roll value control of a SUGV can makes it's heading being located in the direction of the slope in general terrains. But, the problem is that we cannot directly control roll motion for SUGV. Instead we can control yaw motion. In this paper, a new slope driving method that enables the vehicle trace the narrow slopes with IMU sensor usually mounted in the SUGV is suggested which including an estimation technique of the desired yaw angle corresponding to zero roll angle. In addition, a fuzzy steering controller robust to changes in driving speed and the stair geometry is designed to simulate narrow slope driving with the suggested method. It is shown that the suggested method is quite effective through the simulation.

• Journal of Applied Reliability
• /
• v.15 no.2
• /
• pp.131-138
• /
• 2015

In modern warfare, the number of unmanned systems grow faster than any other weapon systems. Therefore, it is very important to predict and measure the combat effectiveness (CE) of unmanned weapon systems in battlefield for deciding defense budget to acquire those systems. In general, quantitative calculation of weapon effectiveness under complicated battlefield is difficult based on the future network centric warfare. Hence, many papers studied how to measure the combat effectiveness and tried to study a lot of related issues about it. However, there are few papers dealing with the relationship between the UGV (Unmanned Ground Vehicle)'s performance and CE in a ground battlefield. In this paper, we do the sensitivity analysis based on a given scenario in a small unit battle. In order to do that, we developed simulation model using AnyLogic and changed the input parameters such as detection and hitting probabilities. We also assess the simulation outputs according to the variation of input parameters. The MOE used in this simulation model output is survival ratio for Blue force. We hope that this paper will be useful to find which input variable is more effective to increase combat effectiveness in a small unit ground battlefield.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.2
• /
• pp.54-66
• /
• 2007

Traffic and emergency monitoring systems are essential constituents of Intelligent Transportation System (ITS) technologies, but the lack of traffic monitoring has become a primary weakness in providing prompt emergency services. Demonstrated in numerous military applications, unmanned aerial vehicles (UAVs) have great potentials as a part of ITS infrastructure for providing quick and real-time aerial video images of large surface area to the ground. Despite of obvious advantages of UAVs for traffic monitoring and many other civil applications, it is rare to encounter success stories of UAVs in civil application including transportation. The objective of this paper is to report the outcomes of research supported by the state agency in US to investigate the feasibility of integrating UAVs into urban highway traffic monitoring as a part of ITS infrastructure. These include current technical and regulatory issues, and possible suggestions for a future UAV system in civil applications.

• Journal of KIISE:Software and Applications
• /
• v.35 no.12
• /
• pp.705-715
• /
• 2008

Today raises its head on the issue of interoperability caused by the complexity of the embedded software and the diverse development environment about SUGV(Small Unmanned Ground Vehicle). So, we propose to adopt the original MDA mechanism for this heterogeneous embedded development. To solve this problem, we apply for developing SUGV with MDA(Model Driven Architecture) using the original UML profile mechanism. Through this method, it can be semi-automatically transformed into TSM(Target specific model) after modeling TIM(Target Independent Model). Then we can also automatically generate the heterogeneous source codes. Therefore it will be reduced the development cycle and effort of the heterogeneous systems. We verify the benefits of our proposed approach and the reliability through analyzing the generated codes.