• 기술사
• /
• 제45권3호
• /
• pp.36-39
• /
• 2012

Roof gardens/Rooftop farm are most often found in urban environments. Plants have the ability to reduce the overall heat absorption of the building which then reduces energy consumption. Plant surfaces however, as a result of transpiration do not rise more than $4-5^{\circ}C$ above the ambient and are sometimes cooler. As Urban agriculture in an accessible rooftop farm, space becomes available for localized small-scale urban agriculture, a source of local food production. An urban garden can supplement the diets of the community it feeds with fresh produce and provide a tangible tie to food production.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1701-1705
• /
• 2008

이 논문은 건물내 또는 건물군 단위로 설치될 신.재생에너지 원격제어를 위한 분산 임베디드시스템에 관한 연구로 제어시스템은 CAN통신을 기반으로 하는 네트워크를 구성하였으며 원격제어를 위하여 Ethernet TCP/IP-CAN 게이트웨이를 개발하였다. 이의 성능을 평가하기 위하여 본 실험실에 설치된 유도전동기 2대의 구동시스템을 활용하여 원격제어실험을 수행하였으며 실험 결과 개발된 알고리즘 및 TCP/IP-CAN 게이트웨이가 매우 우수한 성능을 가지고 있음을 확인하였다.

• 한국농공학회지
• /
• 제15권2호
• /
• pp.3031-3038
• /
• 1973

The aggregate materials being scottored in districts of the country were investigated to provide the data to the Consturction worker who are working without quality tests of construction materials in the small scale land consolidation, farm building construction and new village Construction projects in the country. Also results of the survey will be helpful to those who want to devise a succerrful plan in concrete execution by means of specifying a standard and technical treatment of construction materials.

• 제어로봇시스템학회논문지
• /
• 제20권11호
• /
• pp.1098-1102
• /
• 2014

Localization of aerial vehicles and map building of flight environments are key technologies for the autonomous flight of small UAVs. In outdoor environments, an unmanned aircraft can easily use a GPS (Global Positioning System) for its localization with acceptable accuracy. However, as the GPS is not available for use in indoor environments, the development of a SLAM (Simultaneous Localization and Mapping) system that is suitable for small UAVs is therefore needed. In this paper, we suggest a vision-based SLAM system that uses vision sensors and an AHRS (Attitude Heading Reference System) sensor. Feature points in images captured from the vision sensor are obtained by using GPU (Graphics Process Unit) based SIFT (Scale-invariant Feature Transform) algorithm. Those feature points are then combined with attitude information obtained from the AHRS to estimate the position of the small UAV. Based on the location information and color distribution, a Gaussian process model is generated, which could be a map. The experimental results show that the position of a small unmanned aircraft is estimated properly and the map of the environment is constructed by using the proposed method. Finally, the reliability of the proposed method is verified by comparing the difference between the estimated values and the actual values.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.131-138
• /
• 2016

본 연구는 국내외 건축행정시스템 실태 및 관계법령을 검토하고, 건축서비스산업 실태를 분석하여 건축행정시스템의 단계적 BIM 도입 범위를 제안하였다. 국내외에서 건축행정시스템의 BIM 도입은 대체로 미진한 상황이고 싱가포르만이 별도의 BIM 제출 서비스를 제공하는 등 선도적으로 BIM을 도입하고 있다. BIM 적용 대상 건축물에 대한 기준은 건축인허가 절차와 연속되도록 하는 것이 바람직하므로 관련법에서 규정하는 건축물의 규모 및 종류를 분석하여 단계적 도입 범위를 설정하였다. 각 범위에 포함되는 건축물 설계의 건축사사무소 규모별 참여비율을 분석한 결과 건축물의 층수와 연면적이 증가할수록 소규모 건축사사무소의 설계 수행 비율은 감소하고 대규모 건축사사무소의 비율은 증가하는 것으로 나타났다. BIM 도입이 대규모 건축사사무소 위주로 진행되고 있으므로 건축행정시스템의 BIM 도입은 대규모 건축물부터 점차 작은 규모의 건축물로 단계적으로 확산해 나가는 것이 바람직하다. 최종적으로 본 연구는 건축행정시스템의 BIM 도입을 6단계로 나누고 건축행정절차에 따라 세분한 BIM의 활성화 및 연착륙을 유도하는 로드맵을 수립하였다.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.299-311
• /
• 2018

As engineered timber such as Glulam is seeing increasing use in tall timber buildings, building codes are adapting to allow for this. In order for this material to be used confidently and safely in one of these applications, there is a need to understand the effects that fire can have on an engineered timber structural member. The post-fire resilience aspect of glulam is studied herein. Two sets of experiments are performed to consider the validity of zero strength guidance with respect to short duration fire exposure on thin glulam members. Small scale samples were heated in a cone calorimeter to different fire severities. These samples illustrated significant strength loss but high variability despite controlled quantification of char layers. Large scale samples were heated locally using a controlled fuel fire in shear and moment locations along the length of the beam respectively. Additionally, reduced cross section samples were created by mechanically carving a way an area of cross section equal to the area lost to char on the heated beams. All of the samples were then loaded to failure in four-point (laterally restrained) bending tests. The beams that have been burnt in the shear region were observed as having a reduction in strength of up to 34.5% from the control beams. These test samples displayed relatively little variability, apart from beams that displayed material defects. The suite of testing indicated that zero strength guidance may be under conservative and may require increasing from 7 mm up to as much as 23 mm.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.150-151
• /
• 2022

Blasting is a method that uses explosives to crush the ground. This method is a highly efficient ground cleaning method that can secure high efficiency in a short time. However, explosions can damage local properties and produce high noise and vibration. Therefore, it is important to be careful because there are disadvantages such as the occurrence of many complaints from the surrounding area. In this paper measured and analyzed the noise and vibration generated during blasting at the blasting site in Korea. The noise and vibration generated during blasting were measured by ES03303.2b and ES03402.2a at a distance of 6 m, 12 m from the blasting point. As a result of the measurement, there was little difference between small and medium scale except for precision vibration blasting at a distance of 6m, but noise difference according to blasting scale was evident at a distance of 12m. As a result of the measurement, the maximum noise level was reduced to 5.5 dB(A) and the vibration level was reduced to 7.7 dB(V). In the future, the reliability of the test results can be further improved through additional tests, and it is judged that noise and vibration prediction models based on blasting methods, amount of charge, measuring distance, etc. can be developed.

• Wind and Structures
• /
• 제14권4호
• /
• pp.285-300
• /
• 2011

Researchers at the International Hurricane Research Center (IHRC), Florida International University (FIU), are working in stages on the construction of a large state-of-the-art Wall of Wind (WoW) facility to support research in the area of Wind Engineering. In this paper, the challenges of simulating hurricane winds for the WoW are presented and investigated based on a scale model study. Three wind profiles were simulated using airfoils, and/or adjustable planks mechanism with and without grids. Evaluations of flow characteristics were performed in order to enhance the WoW's flow simulation capabilities. Characteristics of the simulated wind fields are compared to the results obtained from a study using computational fluid dynamics (CFD) and also validated via pressure measurements on small-scale models of the Silsoe cube building. Optimal scale of the test model and its optimal distance from the WoW contraction exit are determined - which are two important aspects for testing using an open jet facility such as the WoW. The main objective of this study is to further the understanding of the WoW capabilities and the characteristics of its test section by means of intensive tests and validations at small scale in order to apply this knowledge to the design of the full-scale WoW and for future wind engineering testing.

• 건축역사연구
• /
• 제4권2호
• /
• pp.25-44
• /
• 1995

Bricks are the earliest man-made building materials. Small-size bar bricks were found in use in the Warring States Period(戰國時代) in China. During the Qin(秦) and the Han(漢) Dynasties, brick constructions were built on a larger scale, but most of them were tombs. In case of Korea, bricks were found in use in the Three Kingdoms Period, but also most of them were tombs. Starting from the Unified Silla Period(統一新羅時代), brick gradually became a universal practice to built Buddhist Pagodas with bar bricks. Brick pagodas emergence marked a stage where technological progress made it possible for man to built high-rise brick work, and their dvelopment further perfected masonry technique and enabled building technology to attain new heights. Though from the very start brick pagodas existed side by side with stone pagodas, at the enitial stage they were overshadowed by their wooden counterparts and stone counterparts, because masonry thechiques were then still rather primitive, while woodwork and stonework had already reached a fairly advaced stage. The pagodas in ancient Korea were closely related to the Chinese stupa, which consisted of three parts, namely, the base, the body and the spire. The fact was, soon after the stupas were introduced into Korea, the Korean stupas began to develop features of their own. Korean brick pagodas were made up of a single-storeyed square base, multi-storeyed square body with a small gate, and a steel post with several layers of lotus flower superimposed one on the other.

• 한국지진공학회논문집
• /
• 제11권5호
• /
• pp.33-47
• /
• 2007

실무에서 지진해석법으로 널리 쓰이는 방법은 등가정적해석법과 응답스펙트럼해석법이다. 이 중 등가정적해석법에 의한 밑면전단력은 구조물의 주축을 해석좌표축에 어떻게 배치하는가와 상관없이 일관된 값을 나타낸다. 그러나 응답스펙트럼해석은 해석좌표 축에 구조물의 주축을 다르게 배치하여 해석을 수행하면 밑면전단력이 각기 다르게 발생한다. 이는 엔지니어가 구조물을 설계함에 있어 구조물의 주축을 해석좌표축에 어떻게 설정했는지에 따라 설계부재력이 모두 달라질 수 있음을 뜻한다. 또한 응답스펙트럼해석은 지진을 가한 방향의 직각방향에서 적지 않은 응답이 발생하는 경우가 생긴다. 한방향 해석에 대한 X와 Y축을 따라 분리되는 이러한 양방향 응답은 보정계수 산정시 쓰이는 밑면전단력을 작게 만들며 이는 결과적으로 보정계수를 크게하여 과다설계의 우려가 생긴다. 내진설계시 발생하는 이러한 문제점을 해결하기 위하여 본 논문에서는 수평의 강성 차이에 따라 구조물을 크게 세 가지(양방향 대칭 구조물, 한방향 비대칭구조물, 양방향 비대칭구조물)로 분류하여 각각의 경우에 대하여 간단한 모델을 선정하고 구조물의 주축을 회전시켜가면서 지진해석을 수행하였다. 각 경우의 예제구조물이 가지는 동적특성과 설계부재력을 살펴보았다. 현재 실무에서 적용되는 보정계수 산정법에 의한 설계부재력과 앞선 문제들을 해결하고자 본 논문에서 제안하는 새로운 보정계수 산정법에 의한 설계부재력을 비교하여 제안하는 보정계수 산정법의 효율성을 검토하였다. 그 결과로 새로 제안된 보정계수 산정법에 의하여 설계부재력을 산정하는 것이 내진설계시 엔지니어들이 겪을 수 있는 혼란을 덜어주며 경제적인 부재설계가 가능함을 알 수 있었다.