• Bulletin of the Society of Naval Architects of Korea
• /
• v.2 no.1
• /
• pp.9-14
• /
• 1965

Ship designers make every efforts to get faster ships in accordance with the development of the Naval Architecture. But for the speed lying over factor length ratio 2.5-3.0, we could put a powerful engine into the conventional round bottom displacement type vessels, but it is very difficult in view point of economy, weight and volume. The principal cause of these speed obstacles is the wave making resistance and researchers are trying to decrease this resistance. One of the resolving ways, planing hulls were applied to small high boats. Planing hull's advantage is not restricted to speed, but the workmanship of the planing hull is easier than those of displacement type vessels of round bottom. Planing hull, therefore, are widely applicable to the intermediate speed boats, which don't have enough high speed to take planing advantage, as well as high speed boats. We will discuss related phenomena of the planing hull in details and this paper we particularly interested in the interjection point(speed length ratio 3.0-3.5 by Mr. D. De Groots) between semi-planing and full planing hulls on the resistance characteristic curve. The paper by Prof. Keuck Chun Kim, "Some Characteristics of Straight Framed V-bottom Hull Forms", Journal of the society of Naval Architects of Korea, Vol.1, No.1, Dec.5, 1964, is referred to the V-bottom hull forms belonging to low speed region and determines practical applicable limit of the speed length ratio combined with construction costs, under which are still used by large commercial vessels. This is the interesting contrast between his and authors. We will further discuss the speed length ratio which is considered as a beginning point to planing effect. For this analysis, we choose 3 model ships: Model (1) and (2) have the same principal dimensions, model 3 varied dimension. Model (1) is full-planing hull, (2) is semi-planing hull and (3) is complete planing hull. They are aimed to collect proper design data for purposed ships.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.1-11
• /
• 2010

The success of semantic web depends largely on the semantic annotation which systematizes knowledge for the construction and production of ontology. Therefore, the efficiency of semantic annotation is very important in order to change many knowledge expressions and generate into ontology instances. In this paper, we presents a generation system of rule-based ontology instances which are produced accurately and efficiently via semantic annotation in conventional web sites. In conventional studies, the manual process is necessary for finding relevant information, comparing it with ontology, and entering information. We propose a new method that manages keyword data regarding extracted information and rule information separately. Thus, it is quite practical to extract information efficiently from various web documents by adding a small number of keywords and rules. The proposed method shows the possibility of ontology instance generation which reuses the rules and keywords from the various websites.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.189-201
• /
• 2013

With the rapid development of information and communication technologies, the boundaries of markets become blurred, and with the increasing uncertainties and risks of the future, competition among global companies becomes more intense. Accordingly the enterprises are considering or already taking cooperation strategies with enterprises in a competitive relationship as well as cooperative enterprises in a high correlation with one's own company as a plan to actively cope with changes in management environments. Thus, a cooperation strategy is an important element for the strengthening of the competitiveness of enterprises as well as the survival of the enterprises. However most preceding studies on cooperation strategies focus only on the effects of the properties of cooperation enterprises on the selection of cooperation partner enterprises and the business performance of the enterprises. Therefore, this study carried out an empirical analysis of the motivation and purpose of the construction of cooperation strategies by enterprise and what differences there are in factors to which importance is attached in selecting partners. In addition, this study analyzed the differences depending on the size: large and small enterprises and depending on the industry: electronics and chemical industries during AHP using a pairwise comparison technique.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.91-97
• /
• 2011

In this paper we present an approach to the structure identification based on genetic algorithm and to the parameter identification by hybrid learning method in neuro-fuzzy-genetic hybrid system in order to predicate the Mackey-Glass Chaotic time series. In this scheme the basic idea consists of two steps. One is the construction of a fuzzy rule base for the partitioned input space via genetic algorithm, the other is the corresponding parameters of the fuzzy control rules adapted by the backpropagation algorithm. In an attempt to test the performance the proposed system, three patterns, x(t-3), x(t-6) and x(t-9), was prepared according to time interval. It was through lots of simulation proved that the initial small error of learning owed to the good structural identification via genetic algorithm. The performance was showed in Table 2.

• Journal of architectural history
• /
• v.16 no.2
• /
• pp.79-98
• /
• 2007

The building site was presumed as the Howonjeokwon or the Dasiwonji established at the traffic route among western inland areas in old Pyeonghaegun. The groundwork was composed inclination terrace of two steps. The upper step was the territory of the main house of ceremony symbolic+lodging function and the down step was divided in the territory of both Ikrang-chae of boarding and lodging management function and the territory of Haengrang-chae pavilion of rest reception management. The building composition by each territory formed space differentiation with the line of flow according to the thorough rule of court rank. The arrangement composition set the strong center axis in tandem, and it was the building arrangement interpreting the territory and the rule of court rank by function as the relationship of master and servant and was the building type emphasizing on the whole unity with the geometric symmetry structure. The Dasiwonji and the Hyeeumwonji had the common point which is the traffic architecture of semi governmental management reinforcing the boarding lodging function in the place which a visitor stayed. The Haeeumwonji and Dasiwonji had the difference in the size, but was the same in the composition system of construction. The external space and the system of the line of flow decided from the functional territory separation and the hierarchical rank as thorough as the geometric arrangement focusing on the whole unity. Namely, it was the strict and unusual system of the line of flow depended on the thorough rule of court rank than the efficient approach or arrangement of the line of flow. After being established to be the Howonjeokwon at the end of Koryeo, it disappeared at the time of the invasion of Japanese pirates when it was the time of the King Woo in Koryeo. It is presumed that it was continued until both wars, Imjin Byeongja, ago after changing its name to the Dasiwon, being restored to the small size at the end of Koryeo at the early of Choseon.

• Smart Structures and Systems
• /
• v.17 no.1
• /
• pp.73-89
• /
• 2016

The stress dependence of ultrasonic wave velocity is known as the acoustoelastic effect. This effect is useful for stress monitoring if the acoustoelastic coefficient of a subject medium is known. The acoustoelastic coefficients of metallic materials such as steel have been studied widely. However, the acoustoelastic coefficient of concrete has not been well understood yet. Basic constituents of concrete are water, cement, and aggregates. The mix proportion of those constituents greatly affects many mechanical and physical properties of concrete and so does the acoustoelastic coefficient of concrete. In this study, influence of the water-cement ratio (w/c ratio) and the fine-coarse aggregates ratio (fa/ta ratio) on the acoustoelastic coefficient of concrete was investigated. The w/c and the fa/ta ratios are important parameters in mix design and affect wave behaviors in concrete. Load-controlled uni-axial compression tests were performed on concrete specimens. Ultrasonic wave measurements were also performed during the compression tests. The stretching coda wave interferometry method was used to obtain the relative velocity change of ultrasonic waves with respect to the stress level of the specimens. From the experimental results, it was found that the w/c ratio greatly affects the acoustoelastic coefficient while the fa/ta ratio does not. The acoustoelastic coefficient increased from $0.003073MPa^{-1}$ to $0.005553MPa^{-1}$ when the w/c ratio was increased from 0.4 to 0.5. On the other hand, the acoustoelastic coefficient changed in small from $0.003606MPa^{-1}$ to $0.003801MPa^{-1}$ when the fa/ta ratio was increased from 0.3 to 0.5. Finally, it was also found that the relative velocity change has a linear relationship with the stress level of concrete.

• Structural Engineering and Mechanics
• /
• v.39 no.1
• /
• pp.125-145
• /
• 2011

Pushover analysis has gained significant popularity as an analytical tool for realistic determination of the inelastic behaviour of RC structures. Though significant work has been done to evaluate the demands realistically, the evaluation of capacity and realistic failure modes has taken a back seat. In order to throw light on the inelastic behaviour and capacity evaluation for the RC framed structures, a 3D Reinforced concrete frame structure was tested under monotonically increasing lateral pushover loads, in a parabolic pattern, till failure. The structure consisted of three storeys and had 2 bays along the two orthogonal directions. The structure was gradually pushed in small increments of load and the corresponding displacements were monitored continuously, leading to a pushover curve for the structure as a result of the test along with other relevant information such as strains on reinforcement bars at critical locations, failure modes etc. The major failure modes were observed as flexural failure of beams and columns, torsional failure of transverse beams and joint shear failure. The analysis of the structure was by considering all these failure modes. In order to have a comparison, the analysis was performed as three different cases. In one case, only the flexural hinges were modelled for critical locations in beams and columns; in second the torsional hinges for transverse beams were included in the analysis and in the third case, joint shear hinges were also included in the analysis. It is shown that modelling and capturing all the failure modes is practically possible and such an analysis can provide the realistic insight into the behaviour of the structure.

• Nuclear Engineering and Technology
• /
• v.45 no.2
• /
• pp.151-164
• /
• 2013

A key input for the assessment of Human Error Probabilities (HEPs) with Human Reliability Analysis (HRA) methods is the evaluation of the factors influencing the human performance (often referred to as Performance Shaping Factors, PSFs). In general, the definition of these factors and the supporting guidance are such that their evaluation involves significant subjectivity. This affects the repeatability of HRA results as well as the collection of HRA data for model construction and verification. In this context, the present paper considers the TAsk COMplexity (TACOM) measure, developed by one of the authors to quantify the complexity of procedure-guided tasks (by the operating crew of nuclear power plants in emergency situations), and evaluates its use to represent (objectively and quantitatively) task complexity issues relevant to HRA methods. In particular, TACOM scores are calculated for five Human Failure Events (HFEs) for which empirical evidence on the HEPs (albeit with large uncertainty) and influencing factors are available - from the International HRA Empirical Study. The empirical evaluation has shown promising results. The TACOM score increases as the empirical HEP of the selected HFEs increases. Except for one case, TACOM scores are well distinguished if related to different difficulty categories (e.g., "easy" vs. "somewhat difficult"), while values corresponding to tasks within the same category are very close. Despite some important limitations related to the small number of HFEs investigated and the large uncertainty in their HEPs, this paper presents one of few attempts to empirically study the effect of a performance shaping factor on the human error probability. This type of study is important to enhance the empirical basis of HRA methods, to make sure that 1) the definitions of the PSFs cover the influences important for HRA (i.e., influencing the error probability), and 2) the quantitative relationships among PSFs and error probability are adequately represented.

• Plant Journal
• /
• v.15 no.3
• /
• pp.35-41
• /
• 2019

In this study, we investigated the effect of the generation of NOx and CO by adjusting the overfire air supply position and ratio using the boiler that was converted from coal burning to wood pellet boiler. When the amount of the overfire air is relatively increased, the amount of NOx is slightly decreased but CO is sharply decreased when burning at low excess air ratio (1.10) that is due to a small fuel particle size. However, NOx slightly increased when burning at high excess air ratio (1.33) due to the large fuel size, but CO was hardly affected. Also, When the amount of overfire air was same, The more supply position was concentrated to upper portion of the main combustor, the more NOx and CO was lowered. And in case of the excess air ratio was high, the generation of NOx and CO I can see that it keeps the level irrelevant to the amount of air for the second stage combustion.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.301-313
• /
• 2003

Effects of the West sea tide to the flow of the Han and Imjin river during floods and normal seasons was analyzed by the hydraulic model. Tidal effect diagrams which represent the inter-relationships between flow of two livers and tide of Wolgot were developed using the results of analysis. At Jamsu and Hangang bridge, the stage rise due to the tide can be reached about 2m at maximum when the discharge of Paldang dam is less than 5,000cms, and the stage rise is very small when the discharge of Paldang dam is more than 15,000cms. In the Imjin river, the stage rise can be reached about 3.5m at maximum when the discharge is below 5,000cms, and can be neglected when the discharge is over 5,000cms.